similar to: Asterisk 1.4 and kernel panic and IRQ interrupts

...SNIP... cat /proc/interrupts=20 CPU0 CPU1 =20 0: 83 0 IO-APIC-edge timer 1: 2 0 IO-APIC-edge i8042 3: 100887 0 IO-APIC-edge serial 7: 0 0 IO-APIC-edge parport0 8: 3 0 IO-APIC-edge rtc 9: 1 0 IO-APIC-fasteoi acpi 16:

Hello, I wanted to relaunch my problem with a quite precise and small question. Could the command "lsusb" affect interrupts when executing it regularly (cron) and if the zaptel pci card is sharing an interrupt with a usb bus? I have a Digium PRI card and a few Xorcom USB Devices. The Digium card seems to share the IRQ with some USB bus. cat /proc/interrupts CPU0 CPU1

Hi fellow asterisk users, I am running Asterisk 1.4.29 with an Digium TE121 card (wcte12xp kernel module) an approx. 100 snom320. The whole installation is running without issues since 5 months. Without having changed anything on the asterisk server for at least 2 months, i noticed "clicking sounds" at external calls over the PRI. Asterisk constantly throws the following messages: ...

Dear asterisk users, We want setup TE121 digium board: Model: Digium TE121: VoiceBus technology allows the TE121 to use an industry standard bus-mastering PCI Express interface. http://www.digium.com/en/products/digital/te121.php My platform Server: HP Proliant 150 G5 OS: UBUNTU x86_64 GNU/Linux Asterisk: 1.4.21.2 zaptel: SVN-branch-1.4-r4662M When we enable zaptel driver for TE121, the

Hello I've got small PBX (30 simultaneous connections) based on asterisk (1.6.2.6), which uses Stargate 2N ISDN to GSM gate. It runs ok for day or two, but then I get: dahdi: HDLC Receiver overrun on channel TE4/0/1/16 (master=TE4/0/1/16) in my kernel logs, in asterisk i get: pri show spans PRI span 1/0: Provisioned, Down, Active PRI span 3/0: Provisioned, In Alarm, Down, Active (span 3

Anyone else seen this eth-device and what brings it up? [root at oh1mrr etc]# ifconfig __tmp1192348344 Link encap:Ethernet HWaddr 52:54:AB:DD:2E:D1 UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:2094689 errors:0 dropped:0 overruns:0 frame:0 TX packets:1645734 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX

I am running irqbalance with default configuration on an Atom 330 machine. This CPU has 2 physical cores + 2 SMT (aka Hyperthreading) cores. As shown below the interrupt for the eth0 device is always on CPUs 0 and 1, with CPUs 2 and 3 left idle. But why? Maybe irqbalance prefers physical cores? My understanding, though, is that the even-numbered CPUs are the physical cores, with the

Hi xen-users, I install xen, on gentoo linux. Install was ok, but i have an issue that i can''t solve. When booting in xen-linux, whereis no eth0 interface. When i boot non-xen kernel all is ok, eth0 is present. I use 2.6.18-xen kernel version. lspci show me: 00:00.0 Host bridge: Intel Corporation 82P965/G965 Memory Controller Hub (rev 02) 00:01.0 PCI bridge: Intel Corporation

Hello all- I have a Digium TE410P in an HP DL145 G2 dual processor server that generates well over 100,000 interrupts per second (sometimes I?ve counted 160,000+ per second) generally resulting in either the system becoming swamped and unusable or the kernel disabling the IRQ the TE410P is on resulting in the spans on that card being unusable. I have confirmed that the card is good by placing it

Hello, I am trying to get a Wildcard TE110P to work in a relatively modern HP Proliant DL385p Gen8 server. Being a potent 12 core Opteron server I expected no problems. Much to my dismay the dahdi_test results are constantly terrible: # dahdi_test Opened pseudo dahdi interface, measuring accuracy... 89.101% 89.195% 89.142% 88.957% 88.953% 89.115% 89.089% 89.134% 89.066% 89.021% 88.933% 89.044%

http://bugs.freedesktop.org/show_bug.cgi?id=15233 Summary: geforce 7800gs and AGP 3.0 DBI function Product: xorg Version: unspecified Platform: Other OS/Version: All Status: NEW Severity: normal Priority: medium Component: Driver/nouveau AssignedTo: nouveau at lists.freedesktop.org

Hello CentOS ! Iam trying to configure a Dual Core 1.6Ghz AMD E-350 machine to be able NIC (eth0) interrupts the most efficient way possible so that I can be able to handle the large number of random source packets per second. Currently running CentOS 6.4 2.6.32-358.6.2.el6.x86_64, i made some load testing with a random sourced syn flood to the NIC of this machine and found out according to

I'm looking for assistance with pci-passthrough on CentOS 6.2. I've installed libvirt version: 0.9.4, package: 23.el6_2.8 from yum. I have a windows XP client setup via virt-manager which boots and runs fine until I attempt to assign a PCI device to it. The error log reads: -----------------/var/log/libvirt/qemu/SageTv.log---------------- 2012-06-02 22:55:07.801: starting up LC_ALL=C

I have a pretty large setup on one of my customers. Digium TE420B (with echo cancelling module), 3 Xorcom Astribanks with 32 FXS each and 1 Xorcom Astribank with 16 FXO. These FXO ports are NOT used for fax/data transmission, as they are connected to cell phones. Not really related to the issue, but there are also 250 SIP phones. The problem is that fax and dial-up connections are really

Hello! I run asterisk 1.6.1.0, dahdi 2.1.0.4 with TE122. I always (and only) have missed interrupt when dahdi disables echo canceller (ng2 or oslec- no difference). Dec 29 14:00:54 asterisk kernel: dahdi: Disabled echo canceller because of tone (rx) on channel 1 Dec 29 14:00:54 asterisk kernel: wcte12xp0: Missed interrupt. Increasing latency to 6 ms in order to compensate. Is it possible to

Hi guys, Hope someone can help me with this... I got an Asterisk with TE120P card... using dahdi 2.1.0.4 and asterisk 1.4.24. The problem is the link between the card and the telco... suddenly through the day looses connection... and the people on site just power cycle the PC and the problem got fixed.... for a while.... I've already replace the cable between the card and the telco. Telco

Hello All, I have 2 Digium card configure on Single machine, which can't share interrupt across all CPUs and sometimes asterisk reach 100% CPU usage. Here is system details and /proc/interrupt o/p. OS: CentOS 6.4 Kernel: 2.6.32-431.11.2.el6.x86_64 Dahdi Version: DAHDI Version: 2.7.0.2 Echo Canceller: HWEC Asterisk Version: 1.8.13.0 Output: /proc/interrupts cat /proc/interrupts

Hi Asterisk Users, We've been experiencing some tough time regarding a new Asterisk installation connected to the PSTN via an ISDN PRI with a Digium TE121 with the optional VPMADT032 echo cancellation module. For now, I'll focus on something very specific which is summarized on this email's subject. However, here are some general facts for the context: - System pbxfri went

Hi I've been running into a weird issue, which its hard to get any information on. We successfully setup a R710 system with Asterisk 1.4.22 / libpri 1.4.7, utilizing a Digium TE121B Pci express card. However we are having some stability issues and can't seem to trace it down to if it is a card/system issue or our PRI vendor having a dirty line. I know some will say it is a old version of

I am getting zero interrupts for a new Digium TE134 Card on a new brand new Dell T40 server with the latest BIOS. Is there something that I am missing or is the card not compatible with Dell servers? (cat /proc/interrupts ; sleep 1 ; cat /proc/interrupts) | grep -i wcte13xp0 16: 0 0 0 0 IR-IO-APIC 16-fasteoi i801_smbus, wcte13xp0 16: 0