similar to: transferring SIP call: no voice

Upgraded from 16.2.14 to 1.6.2.15 on Fedora 13, with aastra 9133i and 57i. On 9133i and 57i: #<extension># works for a blind transfer. Xfer<extension>Xfer doesn't! All this worked on 1.6.2.14. Nothing useful on cli, verbose 3, DEBUG. Here extension 169 answers an outside call, and tries to transfer it to 145 using the Xfer button: -- SIP/169-0000009c answered

On 1.6.0.18-rc3 using app_fax.so, spandsp-0.0.5, anytime I use SendFAX asterisk restarts: [Nov 15 19:00:36] VERBOSE[17013] logger.c: -- Executing [s at fax-tx-test:1] ESC[1;36;40mNoOpESC[0;37;40m("ESC[1;35;40mSIP/nhi-rive rside-sip-00000000ESC[0;37;40m", "ESC[1;35;40mContext fax-tx-testESC[0;37;40m") in new stack [Nov 15 19:00:36] VERBOSE[17013] logger.c: --

Hello i am trying to setup sipgate gateway i can get incoming calls fine, but when i dial in and then try to dial out i get this in asterisk command line -- Called 01179248615 at sipgate [Sep 18 13:58:30] NOTICE[28232]: chan_sip.c:17885 handle_response_invite: Failed to authenticate on INVITE to '"01179553708" <sip:SIP-ID at sipgate.co.uk>;tag=as30eb9dd1' --

I'm trying to setup sipgate on 1.6.1. Following the instructions on the site: http://www.sipgate.com/faq/article/394/How_do_I_configure_Asterisk, I created [sipgate] in sip.conf and a [sipgate-in] in extensions.conf: [sipgate] type=friend secret= ;;SIP_PASSWORD insecure=port,invite defaultuser= ;; SIP-ID fromuser= ;;SIP-ID context=sipgate_in fromdomain=sipgate.com host=sipgate.com

I have two internal analogue extensions off a TDM400P. If the first is busy, I'd like to ring the second. So: [incoming] exten =>s,1,Answer() exten =>s,n,Dial(${mainline},60) exten =>s,n,ExecIf($["${DIALSTATUS}" = "BUSY"]?Dial(${secondline},30)) But it doesn't work because * first tries Call Waiting on the main line. Here I dial out: -- Starting

ei tuka imam edin pf conf obache pravi mnogo nomera, kato se pusne parvoto koeto e dropva paketi, timeoutva po serverite i t.n.. i speed-a e mnogo baven, vijte ako nqkoi moje da otkrie generalna greshka da reply :) vapreki che ne e freebsd-specific :P ne sym go pisal az a i ne sam mnogo mnogo zapoznat s pf zatova ako nqkoi moje da pomogne e dobre doshyl :) btw moje i neshto ot tia opcii kato set

Hi all, I need a little help, i am studing htb to control user bandwidth (download/upload) and I made a script as below to test. I am testing using ttcp tool from by linux box to other linux (192.168.200.51). my box <---- Linux = more than 128kbit mybot -----> Linux = get 128kbit But I want to control both ways, what am I missing? script: EXTIF=eth0 INTIF=eth1 TC=/sbin/tc DOWN=128

I suppose a few questions pop up on this list about access Samba through a firewall. ?I have been very successful running Samba through a firewall, until today. ?I hit a stumbling block. I have a Linux Firewall with the public IP Address of 134.x.x.140 <it is not the exact ip address, but close>. ?I am using NAT and port forwarding to send traffic destined for 137, 138,139, and 445 for BOTH

hi, let me explain in detail, what i have configured and what is happening now: 1st router w724v (Deutsche Telekom AG): - port forwarding, everything to destination port 51000-55999 to device with ip 192.168.2.50 (interface of 2nd router) 2nd router Bintec RS353j): - configured NAT, everything to port 51000-55999 to device 192.168.3.99 (same ports) other direction is totally open. I

Hi, have some problem with incoming calls from sipgate. This was working in 1.4 but in 1.6 I get a 401 Unauthorized :-(. Sipgate has mentioned that I have to change the type to friend, but it is already friend, so what's wrong? Kind regards, Michael Here is the sip.conf: [sipgate_out] type=friend nat=yes username=1234567 fromuser=1234567 fromdomain=sipgate.de secret=secret host=sipgate.de

Hello, I've been looking at the DialPlans by some poeple using Asterisk with SipGate, but the new Asterisk@home 1.0 allows you to create Outbound routes etc, does using the web admin give the same effects? When I add a SIP Trunk with my Sipgate settings and use a pattern of "8|." to place all calls with a 8 prefix tot he sipgate account the softphones dial the number, the Asterisk

Hi, I have a few accounts with sipgate.co.uk to get some different DiD numbers. However, when an incoming call comes in, it seems to pick the wrong peer from sip.conf which sends the call into the wrong context and it fails because there is no extension in that context to match the register. Using the config's below, if I dial the DiD on account 2222222, it works fine - picks peer 2222222

Hi all, I have two sipgate accounts (numbers), if I have both accounts register only one will work for incoming calls (which is all i'm interested in). However if I disable either account the other account will work perfectly. Am I missing something obvious? Thanks in advance, Ray. Excerpts from sip.conf - [general] 8<---- SNIP! ---->8 Register => 1212121:aaaaaaaa at

Hello all. I'm having an odd problem getting * and sipgate to work together. From Sipgate support I have gotten this repsonse to my query: ===== Your Asterisk is registering incorrectly with our servers. It registers like this: sip:s@217.XXX.XXX.XXX:5076 The "s" should be your SIP ID. Anything else is rejected. I don't know where you can find this setting, but from our

Hi, Anyone here using sipgate.de ? It worked for months, but for a couple of days now I'm unable to register with them. My account is ok, because I can login to the website. Asterisk keeps showing me: Feb 25 23:50:18 NOTICE[5144]: chan_sip.c:5269 sip_reg_timeout: -- Registration for 'XXXXX@sipgate.de' timed out, trying again (Attempt #n) I looked at the sip debug stuff, and all I

Hi all. Just as a quote note, can I thank everyone on this list. I find my self finding pretty much every answer I am looking for on here. And a big thanks to all thoughs helping us out. Mass Respect :) Ok, I'm using a SIP provider (SipGate UK) to do my international dialing etc, working great from extension 8 on phones. However some more friends/contacts have started using SipGate also, and

ping times are fine as well: [root at freepbx asterisk]# ping sipgate.de PING sipgate.de (217.10.79.9) 56(84) bytes of data. 64 bytes from sipgate.de (217.10.79.9): icmp_seq=1 ttl=57 time=46.7 ms 64 bytes from sipgate.de (217.10.79.9): icmp_seq=2 ttl=57 time=46.4 ms 64 bytes from sipgate.de (217.10.79.9): icmp_seq=3 ttl=57 time=46.7 ms 64 bytes from sipgate.de (217.10.79.9): icmp_seq=4 ttl=57

Hi all, I'm trying to resolve a weird issue with SIP routing. I have a number of SIP trunks, from a selection of providers, all of which are registered in sip.conf: [general] context=default allowguest=no allowoverlap=no udpbindaddr=0.0.0.0 tcpenable=yes tcpbindaddr=0.0.0.0 transport=udp bindport=15060 srvlookup=yes allowsubscribe=yes

Hi, I have installed Asterisk, Zaptel, Libpri, Addons, Sounds in my Linux system. I got registered with sipgate.co.uk and got the UK phone number i.e., 0207100xxxx. I configured my Asterisk server with 0207100xxxx. When I made a call to this number from outside phone, my XLite extension is not ringing. Its directly going to Voicemail or telling that "person is unavailable". When I

Hi all, I have an issue with asterisk 13 and pjsip. I guess it is somehow Firewall related, but I'm unsure. A registration to Sipgate is established successfully: <Registration/ServerURI..............................> <Auth..........> <Status.......> ==========================================================================================