similar to: Sip phones on localnet AND outside localnet problem

Hi All, Is it possible to specify more than 1 localnet? I know this is an odd question. I have a customer that has multiple sites linked by VPN. Main range is 192.168.33.0/24 and a remote site is 10.1.1.0/24 We want to allow some access to the public IP address at the main site. For this to work I need to use the externip and localnet directive. If I do this it rewrites the SDP with the

Hi, We have some Asterisk servers that we are moving behind a NAT to preserve public addresses and make room for growth. This is Asterisk 1.4 NAT works very good with the externip/localnet-setting when we are connected directly to our teleco. But when I try to use NAT and put them behind our Kamailio something interesting happens: The media-address in the SDP is the internal ip and not the

I've beaten myself bloody dealing with this one... No luck so far. In summary, incoming calls from Gizmo establish, but neither get nor send sound. Outbound calls to Gizmo work fine (well a bit choppy but work) My thought is that the SIP connection is being made fine, but the RTP is getting stopped / blocked / misdone somewhere. Here is the thing: Asterisk 2.5 on Linux (No hardware

Will this do the intended thing? This is in sip_nat.conf which is included in sip.conf: externip=192.168.0.200 localnet=192.168.0.200/255.255.255.0 externip=64.168.237.110 localnet=192.168.1.2/255.255.255.0 I have Asterisk running on a box with two Ethernet interfaces and bound to both. One interface, 192.168.1.2 services clients outside the firewall who are led to believe that Asterisk is

Hi everybody, I finally want to get rid of 1-way audio problem. Please help me here. I have 3 scenarios. 1. Audio is always one way. Caller who dialed can't listen the called party but called party can listen him. In this scenatio Asterisk is on dynamic IP with dyndns FQDN. sip.conf has externip = abc.dyndns.org and localnet = xxx.xxx.xxx.xxx entry. Trunk and extensions are SIP. Where is

I am having trouble setting this system up and wonder if some one help me. Does anyone know what is missing if anything to get 2 phones on my asterisk home server to be able to call each other. I have a WRT54GS running OpenWRT/asterisk connected to a PAP2 with 2 extensions 5060/5061, this is on the lan side of my gateway/router WRT54G 192.168.1.1 BusyBox v1.00 (2006.11.07-01:40+0000)

Hi, I'm using an Asterisk 1.2.18 box with a remote Snom 360. My Snom always rings but sometimes (it happens randomly!) no voice is passing thru (2 ways). Asterisk CLI shows this warning: Jan 10 10:03:26 WARNING[19164] chan_sip.c: Forbidden - wrong password on authentication for INVITE to '"unknown" <sip:unknown at xxx.xxx.xxx.xxx> I have already set localnet and

We had very similar problems to this which drove us insane for ages. Basically we use VoIP trunks (SIP) for all our inbound + outbound calls. Call quality was good however we would get random problems where people could not hear us or us hear them for about 5-10 seconds at a time. After weeks of trying to get to the bottom of the problem it appeared our VoIP trunk provider (sentiro/sip2go) had

Hi all, I am running an Asterisk server behind a NAT. I want to forward the calls from PSTN to a SIP phone (no nat and also an asterisk). I set the externip and localnet in sip.conf already. I opened the ports in my firewall. (I changed SIP port from 5060 to 5065 and limited the rtp port to 12000-13000) However, I just can't call out. I've always received SIP/2.0 404 Not Found. My

Hi All; I was using since one year Asterisk 1.4.19.2 and zaptel 1.4.10.1 and they were working fine via SIP, IAX and Digium fxo and fxs ports. Suddenly just before 2 or 3 days, the voice become garbage like robot when I place a call from the SIP Phone (which is in a country and the Asterisk box in another country). I am surprise what is the reason that let rtp become like this ! The sound now

Hi all! Do anybody has a full working environment using externip on an asterisk box behind a nat? I tried with two diferent boxes (Elastix-1.4.24 e Trixbox-1.4.22-3)and the asterisk do not replace neither contact, neither sdp headers info with the externip informed on sip.conf general parameters. I used these two statements: externip=XXX.XXX.XXX.XXX localnet=192.168.200.0/255.255.255.0 Do

Hi all, I've tried search this problem on the list... no luck... The case is: without externip/localnet config on sip.conf [general] my SIP trunk works, but with no audio NAT problem (asterisk sends the private 192 address to the outside...) when I configure externip/localnet correctly my SIP trunk simply disappear! Checking the signalling with tcpdump shows me that Im sending the

Hi :) I've had all this working before, but I'm revisiting it, and in short, I currently have huge problems receiving incoming calls. I've been trying with both FWD and voiptalk.org. I'm running CVS HEAD of asterisk, zaptel and libpri as of yesterday afternoon. Would someone mind helping? :) My machine is 10.0.0.1 on my LAN, but the ADSL router has 10.0.0.1 set as the 'DMZ

I've been googling and talking with Libretel about my setup and the fact that incoming calls to my asterisk box through the Libretel number reach my box (I hear the greeting being played) but then don't accept DTMF. Here is a rough diagram of my setup: Asterisk | server | NAT <------------ Libretel | router | Note that there are NO SIP

Hi there, I am trying to setup a configuration that requires me to use SIP and asterisk behind a firewall and over a VPN to a remote office and with some local Phones also. I can't use IAX to my provider because they don't offer it and my handsets ( snom 300 ) also don't support IAX so it's all SIP. The configuration is a follows Asterisk PBX 10.202.17.217/24 ------>|

asterisk-users-request@lists.digium.com is believed to have said: >Hi, all >Got it to work finally. Thanks to all. > >Had to add >> [general] >> externip=xxx.xxx.xxx.xxx ;ip address of your nat firewall (public ip) >> localnet=192.168.0.0/24 ; the local subnet where the asterisk box is > >Actually, I had 'externip' before, but I have added

Hi, This problem has been tackled over and over, I know. I'm trying to understand why I'm having trouble with my "simple setup". My setup is like this: <SIP_PROVIDER>---<DSL1>---<LINUX_GATEWAY>---<ASTERISK_VIA_DSL1> I've unloaded the nf_*_sip kernel modules from the LINUX_GATEWAY just in case they could interfere. The DSL1 modem/router is a

I'm running asterisk on a Freebsd with 2 Nic's. Inside NIC is 192.168.5.x where the phones are. Outside NIC used to be a public IP with the ISP's device set to bridging, but the new WiMAX router only offers me the public ip 94.18.x.x on the outside, and forwarding everything to 192.168.1.50 on the "Outside NIC" Some of the phones are being disconnected with Asterisk

My previous post hasn't even made it to the list yet (am I being moderated?), but I got Vonage's Softphone service working for inbound and outbound calls. Keep in mind that there's currently no perceived limit on simultaneous inbound calls, which makes this a wonderful solution for Asterisk (at least for my use). Below is a sanitized snippet from my working sip.conf; your mileage may

is the case, try changing it to 'externip=54.241.129.14'. You should also set localnet as follows: ; RFC 1918 addresses localnet=192.168.0.0/255.255.0.0 localnet=10.0.0.0/255.0.0.0 localnet=172.16.0.0/12 If that doesn't work you can also try setting 'nat=force_rport' instead of 'nat=yes'. > [7001] > type=friend > host=dynamic > secret=123