similar to: Unable to execute

I have this in my extension.conf: [incoming_28345474] ; 8862100 is the hotline number of the Welltech 3804 ; exten => 8862100,1,NoOp(${CALLERID(num)}) exten => 8862100,2,Wait(1) exten => 8862100,3,Set(CALLERID(num)=${CALLERID(num)}) include => fax2emailstart [fax2emailstart] exten => 3000,1,SetVar(CALLEDFAX=${EXTEN}) ; me exten => 3000,2,Answer exten =>

Below is my extensions.conf for the fax part [incoming_28345474] ; ;******************************************************************** ; BEGIN - Inbound call handlers ;******************************************************************** ; exten => 8862100,1,NoOp(${CALLERID(num)}) exten => 8862100,2,Background(if-u-know-ext-dial) exten =>

Hello all, Can this be done ? Would setting the variable FAXRESOLUTION to a appropriate value affect this change ? > http://www.asteriskguru.com/tutorials/rxfax.html Variables connected with the application LOCALSTATIONID - used by to application to identify itself to the remote end LOCALHEADERINFO - used to generate a header line on each page REMOTESTATIONID - set by the application, the

Hi all, My BRIstuffed 0.2.0-RC7k is running fine on my debian box for voice calls over ISDN2. Now I want to implement receiving incoming faxes into my setup so I did a google and some reading on the wiki. I got the spandsp 0.0.2pre10 package compiled and installed, patched asterisk's apps makefile and compiled * again. This all worked out fine. When integrating the RxFax into my dialplan the

Hello: I have been using the asterisk system now for almost 5 months. I'm very happy with it's performance, however I have been using the RXFAX on and off for the last month or so. I gave up after a while and just had it route to my analog fax machine in the fax context. However, I have always had the implementation that it would go to a macro.. macro-faxreceive, and to the rxfax of the

Hello All, I am looking to receive faxes via my inbound SIP, but I can get it to answer the fax. Now I did test the SIP inbound to a phone and that does work it is just the fax part I am having issues with any help would be great. This is the error I am getting Mar 11 15:08:49 NOTICE[14322]: rtp.c:430 ast_rtp_read: RTP: Received packet with bad UDP checksum Mar 11 15:08:49 WARNING[14322]:

I wonder if Asterisk's skinny/sccp channel driver could be used as a "client" to register with a Cisco PBX. That is, along with a SIP client, say, have Asterisk and said SIP client stand in for a Cisco phone, or an IP Communicator. Anyone done this? Cheers, b. -------------- next part -------------- A non-text attachment was scrubbed... Name: not available Type:

Hello All, I just started to use asterisk with Digium card (4 fxo ports) and I've met some problems ( I'm just new in asterisk so questions may be stupid ) my environment: Debian testing, asterisk 1.0.9 zaptel-1.0.9 TDM04P 1) when asterisk receiving incoming call on TDM card all networking cards stops to send or receive any data for some time nothing suspicious in the log files,

Hey All, I'm still (since April) having problems getting RxFax to work over an ISDN4Linux channel. Just wondering if anyone has had any luck getting it to work? I have done a CVS update today (about half hour ago) and made sure I have the latest version of spandsp according to Steve's website (spandsp-0.0.1k). When I was compiling asterisk, I got the following warnings:

Hello. Im trying to get Fax-to-email working. I've installed Rx and txfax, spanDSP and every package needed. I've done everything on this page (altough, some bash-scripting problems): http://www.voip-info.org/tiki-index.php?page=Asterisk+Fax+to+email anyway, when i try to send an fax, i get theese messages in asterisk: -- Executing Goto("SIP/5060-08148520",

Well, my faxes passes through asterisk successfully, however I still have some problems about fax reception by rxfax. The softfax answers, and negotiates transmission, however then as some stage of communiation something is wrong. But I have nothing more but this log: Jun 2 00:10:21 DEBUG[16900]: chan_zap.c:4242 zt_read: DTMF digit: * on Zap/10-1 Jun 2 00:10:22 DEBUG[16900]: chan_zap.c:4242

I'm copying some LLD code into my codebase like this: // workaround for LLD not exposing ability to convert .def to .lib #include <set> namespace lld { namespace coff { class SymbolBody; class StringChunk; struct Symbol; struct Export { StringRef Name; // N in /export:N or /export:E=N StringRef ExtName; // E in /export:E=N SymbolBody *Sym = nullptr; uint16_t Ordinal

Scenario: I''m creating an image file upload service for my web site. As well as saving the actual file I also need to create a database record for the file. I would like to name the file after the record id, but I also need to save some attributes of the image (width/height/mime_type etc) which I can''t discover until after the file is created. The Problem: 1) The id is not

On Wed, Jun 14, 2017 at 7:37 PM, Rui Ueyama <ruiu at google.com> wrote: > On Wed, Jun 14, 2017 at 4:24 PM, Andrew Kelley via llvm-dev < > llvm-dev at lists.llvm.org> wrote: > >> I'm copying some LLD code into my codebase like this: >> >> // workaround for LLD not exposing ability to convert .def to .lib >> >> #include <set> >>

I saw this change come in yesterday: commit 572ad839e2f66eaa82ffc71b1061eb3d06a4d126 Author: Saleem Abdulrasool <compnerd at compnerd.org> Date: Thu Jun 15 20:39:58 2017 +0000 COFF: add support for lib mode usage When link is invoked with `/def:` and no input files, it behaves as if `lib.exe` was invoked. Emulate this behaviour, generating the import library from the

Hi list, my samba server is connected to 2 networks. In one network this machine is just a simple workstation (the lan of our building), but in the other network (my private network) i would like it to be the PDC, have different shares, and have a different name, etc. My current setup (excerpt) is this: NET1 = 192.168.1 #External NET IP1 = 192.168.1.34 #External IP NET2 = 192.168.2

I am trying to implement the uploading of a file to a remote server I get error while trying to write the file on the server. The error I get is the following: undefined method `rewind'' for #<String:0x2aaaad062eb8> It seems to be treating my file as a string instead of a File object. --------- Code is below ------------------ VIEW: <%=

Im using a customs processor to run ffmpeg on a video to create a thumbnail. So far so good. Except when I do: cmd = "-i #{@file.path} -f flv -s 320x240 ~/Downloads/foobar/q.flv" success = Paperclip.run(''ffmpeg'', cmd) Console is reporting: ffmpeg ''-i /var/folders/uL/uL0bYOOZEZaJH5E+BmDJVE+++TI/-Tmp-/stream, 16824,1.mpeg -f flv -s 320x240

Dear all I am new to rails. In view, I place the following code, but cannot show the picture in the webpage <%= image_tag("green.JPG") %> However, I can access the picture in this url http://localhost:3000/images/green.JPG The HTML source code generated <img alt="Green" src="/images/green.JPG.?1228211220" /> I cannot identify the problem. Please help

Hello... I have a big problem with asterisk. Every time i make a call asterisk does not bridge the zap channels. The zap channel from which i'm calling remains in state:ring and applicaton:dial and the zap channel with the external line configured remains in state:dialling an Application:AppDial. Zap/20-1 agentie s 1 Dialing AppDial (Outgoing Line) 09399 (None) Zap/9-1 int_omg 09399 5 Ring