similar to: Clear pending SIP channels

Hi guys, I recently faced an issue regarding SIP registration: I have a 2-NIC Linux PC, with eth0 set to address 192.168.1.1 (NATted over public network, with address 89.X.Y.Z) and eth1 set to address 1.1.1.1. In [sip.conf] I set general option bindaddr=0.0.0.0 ; IP address to bind to (0.0.0.0 binds to all) Then I have configured an account as following: [999] type=friend

Hi all, Some time ago I posted an issue regarding the hangup of active calls from the CLI and someone told me that "soft hangup" should work. Well, in fact it does work, but only if the channel is known, i.e. it doesn't work for zombie channels. For example, I have this scenario (CLI output of command "iax2 show channels") IP-AM-PBX*CLI> iax2 show channels Channel

Hello all I've discovered that SIP channels sometimes get stuck in *. I've read some posts from Fri 29 Aug 2003 which mentions this issue, but there doesn't seem to be any final answers I don't know if this is related to the 0001604 bug? Below is a list from one of the incidents: I know the (d) means that it is scheduled for destruction but the 10.1.1.45 channel hasn't

I am using a2billing as calling card platform with asterisk 1.2.17. After running for several days, if I issue 'sip show channels' command, I got a lot of dead sip channels although 'show channels' command only show 5 channels. What cause these dead channels? How can I clean out these dead channels? Will they pose any problem to my * server if left alone? What does this (d) mean?

Can someone recommend the best way to view current calls in progress on the Asterisk console? Neither the 'show channels' or 'sip show channels' commands are easy to read. hestia*CLI> show channels Channel Location State Application(Data) SIP/2944093-f9e2 (None) Up Bridged Call(SIP/2944079-e7f2) SIP/2944079-e7f2

Hi, I am using Trxibox 2.6 latest ISO install. Following is the output of : "sip show channels" [trixbox ~]# /usr/sbin/asterisk -rx "sip show channels" Peer User/ANR Call ID Seq (Tx/Rx) Format Hold Last Message 212.53.40.40 0218245 6cfb845d050 09011/00000 0x0 (nothing) No 192.168.1.116 (None) YTc4ZmM3NjV 00101/00006 0x0

Hi, I developed a package that requires 5 other packages. I was wondering if anyone knows how can I automatically download and install the required packages during the installation of my new package. My idea is to make this process easier to the final user. All the required packages are under bioconductor source but I don't know where I can include the code to download and install them.

My sip show channels shows some channels active that I can not make sense out of, and they have been that way for days, so I am pretty sure they are orphans. Is there a way to show active CALLS (instead of channels) to try and determine the source? Does the output below provide any clues as to why these channels might show active? Anyone aware of related bugs? The #'s indicate original

I made the post below earlier today. I'v since removed all NAT from the equation and the problem still persists. Basically I am trying to transfer a call. The transferring phone sends a REFER message to asterisk with a call id that Asterisk doesn't know about. Surely, surely.... someone else must have seen this? hermes*CLI> sip show channels Peer User/ANR Call ID

Hi all, I have a Cisco 1760 gateway and and Cisco 7960 VoIP phone running via Asterisk. Both are running g711A codecs and SIP. On inbound calls I get a native bridge, however on outbound calls I never get a native bridge. With other SIP gateways I do get a native bridge on the outbound call. My sip.conf is as follows: [cisco1760] type=friend context=incoming host=192.168.0.55 insecure=yes nat=no

Hi! I'm trying an asterisk-FWD connection. I'm using X-Lite OR SIPPS as the IP phone. I configured the X-Lite and SIPPS to use GSM codec. Whe I call FWD, I get this info on the channels when the call has not been stablished yet: sip show channels Peer User/ANR Call ID Seq (Tx/Rx) Lag Jitter Format 192.246.69.223 613 1770bf3430d 00102/00000

Hi all, i'm trouble with codec setup on an asterisk machine 1.4.18 and some Thomson ST2030 as extensions. In the users.conf file for internal extension i have: disallow=all allow=g729 allow=alaw allow=ulaw Without any codec installed (i mean with original g729 of asterisk) all go fine, calling from an extension to one other: Peer User/ANR Call ID Seq (Tx/Rx) Format

hello all, I have installed centos 5.5 ( linux text) and I have updated it with # yum install bison bison-devel================?ok # yum install ncurses ncurses-devel==========?ok # yum install zlib zlib-devel===============?ok # yum install openssl openssl-deve=======?ok # yum install gnutls-devel============ ==?ok # yum install gcc gcc-c++============?ok # yum install newt

vps*CLI> iax2 show channels Channel Peer Username ID (Lo/Rem) Seq (Tx/Rx) Lag Jitter JitBuf Format 0 active IAX channels vps*CLI> core show channels Channel Location State Application(Data) 0 active channels 0 active calls vps*CLI> sip show channels Peer User/ANR Call ID Seq (Tx/Rx) Format

Has anyone seen this before? This channel is consistently present on both of my asterisk servers. Sometimes they disappear for a few seconds and then come back. It always has the same Call ID. voip1*CLI> sip show channels Peer User/ANR Call ID Seq (Tx/Rx) Lag Jitter Format 192.168.0.102 (None) df92fb1b-8a 00101/03059 00000ms 0000ms UNKN

Hi All, I do have asterisk installed for a call center and I would like to know if it is possible to create a scipt and execute it from a PC connected to the Network without accessing the server. This script should restart asterisk and another service related to aheeva. The problem now is that each time I have to access using PUTY to the server to start and run services manually. Service

192.168.1.107 199 6bd3fb49505 00102/00000 ulaw No Tx: ACK 192.168.0.100 110 5c5a4953-65 00101/00005 ulaw Yes Rx: ACK Those channels are stuck talking to each other. The phones are disconnected yet that connection remains. I can clear w/ a restart obviously, but is there any way to tear down a call like that from the CLI? Bill -------------- next

I'm having an oddball issue with a Polycom SoundPoint IP 500. As you can see below Asterisk thinks there are 2 SIP channels active, but show channels tells me there are no calls active. Anyone have any idea why this is happening? The Polycom occasionally stops accepting calls and requires a power cycle. fs-1*CLI> sip show channels Peer User/ANR Call ID Seq

Hi all, Some of my asterisk users have used their maximum call limit for incoming calls (peers). There incoming call limit should automatically reset to zero after hangup but its not happening and they no longer can recieve any calls as their allowed limit is already full. So is there any way to reset the call limit on peers by commands or do i have to restart my asterisk server? -- Best Regards

Hello my friends... Currently we are using the following firmware versions on ours aastra 55i: Firmware Information Attribute Value Firmware Version 2.1.0.2145 Firmware Release Code SIP Boot Version 2.0.1.1055 Date/Time Jun 20 2007 06:20:29 Can we make a firmware upgrade to the latest one: 6755i (55i) SIP, V2.5.3.18, January 2010 , English , ZIP , 2,849 KB on the site: