similar to: delay in processing dtmf

We're creating a SIP gateway for a client that will take one leg of a call in via SIP, and out the other side via H.323. To minimize load on the gateway, we would like to have the RTP stream bypass the gatewayy altogether (directrtp/reinvite). Is this possible with these to protocols? Thanks -------------- next part -------------- An HTML attachment was scrubbed... URL:

Dear, is any way to change , the size of voice packets? I want to increase the quality by decreasing the size of each packets, because of bandwidth failure. ? thanks in advance Mani -------------- next part -------------- An HTML attachment was scrubbed... URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20081110/c1b2ed9d/attachment.htm

Hello, all. I've come across a nasty problem just as we are ready to put our first system into production. During our final testing, we were plagued with several "invalid extension" or "password incorrect" messages when we knew the information entered was correct. Upon investigation, we saw that DTMF signals were occasionally but not consistently duplicated. We might

Has anyone done any large scale intercom deployments with Asterisk? I've been asked about building a system to one-way page 500 phones simultaneously from a single server. My concerns are: - My limited math capabilities suggest 41 Mbps of RTP traffic, which seems like a lot, plus asterisk would be taking a single input stream and exploding it out to 500 endpoints. - There are 500

This was so interesting I had to move it to its own thread! Is anyone using this script? How does it perform compared to the older WonderShaper script? -M- ================== Thanks Kristian I will checkout the new script and see how it goes! Jonn -----Original Message----- From: asterisk-users-bounces at lists.digium.com [mailto:asterisk-users-bounces at

Happy New Year in advance by a few ticks for the northern hemisphere. Here's the first topic and guest for 2009: In any voice path there are several potential sources of quality problems, ranging from echo to voice dropouts and everything in between. With VoIP systems the potential for quality problems increases dramatically, often times making it very difficult to identify the source of

Hello everyone, I just ordered one of these: http://www.marvell.com/products/embedded_processors/developer/kirkwood/sheevaplug.jsp Just over $110 with shipping but they are expecting the price to come down quite a bit: - 1.2Ghz ARM5 - 512MB RAM - Multiple flash storage options - Gigabit ethernet - USB 2.0 - 5 watt power usage They probably won't be shipping until late March but I

I'm trying to figure out how to handle our fax line when we switch to our asterisk for voice. After a lot of reading and poking about I have concluded, as have many others it would seem, that the best thing to do is either to have a separate pstn fax line or use some sort of internet faxing service rather than try and make faxing work in a way it's not meant to over voip lines.

I am running Asterisk and would like to add SER to register my (sip) DID and connect it to asterisk; but I'm not sure if this is the correct forum. I have as DID, sip account with one VoIP provider; currently I"m using just stand alone SIP phone and register with the VoIP provider via: stun.fwdnet.net Is it possible to use SER to register with the provider and forward the call

Hi, I want to be able to bridge two sip channels using direct RTP between my endpoints (Audio IP : not local) but without using reinvites. So I set up my asterisk sip endpoints as follows: [test1] type=friend host=dynamic username=test1 dtmfmode=info context=test_rtp allow=all canreinvite=no directrtpsetup=yes [test2] type=friend host=dynamic username=test2 dtmfmode=info context=test_rtp

Dear all, I have Asterisk 1.4 with SIP. I have a voicemail implemented with GSM sound files. The problem is I have IP phones Utopix HyperPhone 202 which support only G.729a/u and G.723.1 high/low, but not GSM. If I choose G.729A the "pass-throu" calls among users are OK, but Asterisk can't transcode GSM to G.729A in voicemail calls. My company doesn'y want to pay for a G.729

Hi. I have a SIP provider which wants RFC2833 for the dtmfmode, however I would like to increase the duration of the tone, its pretty short and some IVR's are unhappy or don't detect it. I did poke around, but it looks like when RFC2833 is used, it actually generates rtp packets of some sort, so I have no idea how to increase that duration. Any assistance would be appreciated. -- Your

After getting some ERRORS like this: [Oct 8 21:42:49] ERROR[31903] rtp.c: No RTP ports remaining. Can't setup media stream for this call. [Oct 8 21:42:49] ERROR[2485] rtp.c: No RTP ports remaining. Can't setup media stream for this call. [Oct 8 21:42:49] ERROR[31903] rtp.c: No RTP ports remaining. Can't setup media stream for this call. [Oct 8 21:42:49] ERROR[2489] rtp.c: No RTP ports

Hi, Would like to run the software to monitor the quality of the bandwidth. Suggestions welcome? Thank you. Shaun -------------- next part -------------- An HTML attachment was scrubbed... URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20081211/85bd0069/attachment.htm

Hi I am trying to connect asterisk with a Cisco GW 2600 with E1 pri using a Digium, Inc. Wildcard TE210P dual-span T1/E1/J1 card 3.3V (rev 02), Errors: [Jan 28 17:32:33] VERBOSE[6182] logger.c: == Primary D-Channel on span 1 up [Jan 28 17:32:33] WARNING[6182] chan_dahdi.c: PRI Error on span 0: We think we're the CPE, but they think they're the CPE too. [Jan 28 17:32:34] NOTICE[6182]

Greetings. I''m trying to find a few concrete examples of how to use augeas within a Puppet module, to make changes to a JSON file. I''ve been googling for the past hour and a half, and while I have found several pages which provide reference-type documentation, I have yet to see a single usable example. All of the augeas examples seem to demonstrate how to maintain a file for

Hello everyone, I'm trying to turn up a SIP trunk with a Cisco UCM (Unified Communications Manager/Call Manager). It's currently configured for 3rd party call control (3pcc). The INVITEs show up without an SDP... Neither the Cisco admin nor myself can find any documentation on how to disable this feature (3pcc). Does anyone happen to know how to disable 3pcc on Cisco Unified

This Friday's edition of the weekly VoIP Users Conference call is all about wideband audio (aka HD Voice) and conferencing. The guest for this call is David Frankel, CEO of ZipDX a commercial service that specializes in wideband conferencing. We expect an interesting call touching on many aspects of VoIP going beyond the traditional phone service, conference bridges, technical standards,

Hello everyone, I've had the time to examine some specific serial/parallel forking scenarios with Asterisk lately. Looking at chan_sip it appears that anytime Asterisk wants to tear down a call before it's brought up, it sends a 603 Declined: } else { /* Incoming call, not up */ const char *res;

I'm running AsteriskNow 1.7.1 with a OpenVox 2/FXO/2FXS card, a Linksys SPA942 SIP phone and outgoing SIP and IAX routes. When I dial local PSTN numbers from the SPA942 using the FXO channels I observe a 5-7 second delay between when the PSTN number answers the call and when Asterisk connects the call at my end. There's enough delay time that I hear an additional ring after the PSTN