similar to: Bridge command in 1.6

When I have voip conversations over asterisk through my computer the voice quality is nice and loud and quite clear. When I go through my Sipura 2K then the conversations are typically very muted and my responses sound somewhat delayed. I've tried fiddling with settings under asterisk and the 2K but haven't had any luck. Can someone point me in the right direction to get this

Hi. I've got a working dial plan on my home system but there are problems with it and I was hoping someone more comfortable with dial plans might be able to help. In a nutshell here's what I'm currently doing on an incoming outside phone call [default] Set(TIMEOUT(digit)=3 Set(TIMEOUT(response)=60 exten => s,1,NoOp(Answering in default context) exten =>

I have two asterisk servers. One is at location 1 and the other is at location 2. What I am trying to do seems straightforward. I want the Asterisk server at location 2 to send all it outbound calls to the Asterisk Server at location 1. Both asterisk servers can dial each other using extensions without a problem, but when users on Asterisk server 2, dial 9XXX-XXX-XXXX the call never reaches

Hi, Where can I find doc related to IMAP storage. Usually, config options can be found either in voicemail.conf or voip-info.org but almost none relates to IMAP configuration. At the moment, I'm looking for data related to imapflags possible values. Regards -------------- next part -------------- An HTML attachment was scrubbed... URL:

Hi, I am unable to log into samba anymore since I upgraded to 2.0.3. I've attached my smb.conf below and I've even gone to trying the CVS releases to see if one of them will help. First of all, I get soemthing like {33}: smbclient -L vilnius -U mharrell Added interface ip=207.97.105.146 bcast=207.97.105.255 nmask=255.255.255.128 Password: session setup failed: ERRSRV

Why is www.secnet.com down ? i'm looking for the samba-audit-tool and didn't find any mirror. Thomas On Fri, 30 Apr 1999 samba@samba.org wrote: > SAMBA Digest 2073 > > For information on unsubscribing see http://samba.org/listproc/ > Topics covered in this issue include: > > 1) Group-Shares > by Johannes Scherbaum <scherj@funkhaus.de> >

What do these log messages mean? 12/19/1997 14:29:09 netbios nameserver version 1.9.18alpha13 started Copyright Andrew Tridgell 1994-1997 12/19/1997 14:29:09 become_domain_master_browser_wins: attempting to become domain master browser on workgroup COAA, subnet UNICAST_SUBNET. become_domain_master_browser_wins: querying WINS server at IP 38.178.252.3 for domain master browser name

We are looking at implementing a Windows Domain structure very soon and I have been asked to evaluate/investigate the differences between using Samba as a DC vs a true Win2k DC. We run TCP/IP and Appletalk on a 100Base-T network. I'm the main Microsoft person in the group and have a lot of Windows experience (9x - XP). We currently have a primary NT 4 domain controller mainly acting as

Hello all. I know this does not directly relay to Ethernet bridging but I need some advise... anyone want to give me some info/help on the subject. In the interest of multipath routing I need to know if it is possible to do a one-way arp spoof. Lets start with the machines layout... br1------ADSL br2------cisco router-----serial line. br0-----Internal network. I already have

(This is a brief announcement of a focused development/refinement of the Netatalk project.) The primary goal of Baltra is to provide a Mac OS X compatible AFP file sharing service with Samba 3.0 compatibility. We are hoping to have an AFP file sharing daemon which can run in parallel with Samba 3.0 to provide seemless file sharing amoungst SMB-based clients (Windows and MacOS-X) as well as

I have a very, very simple Asterisk setup in my house. I have a Sipura 3000 with a PSTN line connected and one analog phone connected. The [incoming] context looks like this: exten => s,1,Dial(SIP/50,23,r) exten => s,2,VoiceMail(u50@default) exten => s,3,Playback(vm-goodbye) exten => s,4,Hangup As you can see, when somebody calls in if I don't answer in 23 seconds then they are

Hi List All the imap sync apps I could find requires the username /password credentails to be known before a sync occurs. I have Dovecot using ldap acting as a nearline backup mail server to MS Exchange. Every hour imapsync syncs mail between Exchange and Dovecot. This all works fine becuase the users credentials are known, but when new users are added I would like the process to work

Dear all, I have a dataframe of names (netw), with each cell including last name and initials of an author; some cells have NA. I would like to extract only the last name from each cell; this new dataframe is calle 'res' Here is what I do: res <- data.frame(matrix(NA, nrow=dim(netw)[1], ncol=dim(netw)[2])) for (i in 1:x) { wh <- regexpr('[a-z]{3,}',

> Le 9 juil. 2020 ? 19:26, Bernhard Dick via samba <samba at lists.samba.org> a ?crit : > > ?Hi, > >> Am 02.07.2020 um 17:23 schrieb Martin Hauptmann via samba: >> Sorry if I didn't find the right manual. >> I would like to set up a new Domain Controller and connect it to an existing Office 365 with Exchange in a way, AD-Users of a certain group can login

Thanks for the advice. I had played with NT4 a little bit to see if I could use it for setting up a resource domain for windows 2003 machines- since it looks like you can join Windows 2003 machines to an NT4 domain (so why PCNL can't I don't know), and then establish trusts between NT4 and PCNL. I didn't really want to have NT4 machines in my enviroment any longer than necessary so

I am in the middle of building YARELS (Yet Another Real Estate Listing Site), and here is one of my issues with model relationships. I have to core models and DB tables: User Property Here are the relationships I need to express: A user can have many properties that he owns (he is the seller) A user can have many properties on his favorites list (he is a buyer/seeker) A user can have many

-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 Hi Everyone, Want to let you know that I''ll be syncing over all the aspects of RoR''s mailing lists and it''s site onto a new dedicated server that''ll just be for RubyOnRails.org/.com. It''ll all be seemless and kept in sync until David flips the DNS switch, but there will be a couple of times where the

The CentOS-6.0 Continuous Release ( CR ) repository is now available on mirror.centos.org. This repository contains rpms to be included in the next CentOS-6.x release ( 6.1 ). Because these include security and bugfix updates, we strongly recommend everyone using CentOS-6 install and update their system using this repository. --------------------- Download and Install: The centos-release-cr-6.x

Hi, Am 02.07.2020 um 17:23 schrieb Martin Hauptmann via samba: > Sorry if I didn't find the right manual. > > I would like to set up a new Domain Controller and connect it to an existing Office 365 with Exchange in a way, AD-Users of a certain group can login and not having to login to Office365. > > My questions: > > Can I map the existing Office365-Accounts to the

Hi, Something else that might be interesting: Azure AD Connect cloud provisioning. https://docs.microsoft.com/en-us/azure/active-directory/cloud-provisioning/what-is-cloud-provisioning It's something new, that I guess could be relevant for someone checking out Azure Sync options. MJ On 7/10/20 10:03 PM, Georges Martin via samba wrote: > > >> Le 9 juil. 2020 ? 19:26,