similar to: Asterisk and Sheeva "wall wart".

Hey all, I have a potential project which calls for a very small form-factor computer like this: http://www.marvell.com/products/embedded_processors/developer/kirkwood/sheevaplug.jsp However, I am needing an FXS port integrated into a small footprint computer. Nothing larger than a WiFi router or gateway device, but the smaller the better, and able to run Asterisk with at least a spare USB port

Hello everyone, I just ordered one of these: http://www.marvell.com/products/embedded_processors/developer/kirkwood/sheevaplug.jsp Just over $110 with shipping but they are expecting the price to come down quite a bit: - 1.2Ghz ARM5 - 512MB RAM - Multiple flash storage options - Gigabit ethernet - USB 2.0 - 5 watt power usage They probably won't be shipping until late March but I

Hi, having a nightmare trying to get dovecot working on my SheevaPlug (flash based ARM embedded device). I need to use virtual users, and I need to store all the mail on an external USB HDD (not in home directories which live in the limited flash space). However I can't even log in via telnet. I've followed the Wiki troubleshooting tips, and still no further forward. logging via telnet, I

Hi Renato, > I was recently investigating the build bot infrastructure and noticed > that the arm-linux target is failing for quite a long time. I believe > that it means ARM code is not executed all that often in LLVM tests, > is that correct? > > We were wondering what kind of support we could give to make sure ARM > code is correct and don't regress, specially before

Hi all, I was recently investigating the build bot infrastructure and noticed that the arm-linux target is failing for quite a long time. I believe that it means ARM code is not executed all that often in LLVM tests, is that correct? We were wondering what kind of support we could give to make sure ARM code is correct and don't regress, specially before releases (I know it's a bit late

On 2011-04-08 08:58, Duncan Sands wrote: > Hi Renato, > >> I was recently investigating the build bot infrastructure and noticed >> that the arm-linux target is failing for quite a long time. I believe >> that it means ARM code is not executed all that often in LLVM tests, >> is that correct? Hi i will summarise the last sucessfull builds by the ARM builder:

Hello! I have compiled Asterisk 1.8.1.1 on my SheevaPlug. It works all right for me, except for one problem that I have encountered: I can only register a SIP client (X-Lite in my case) if the secret field of the extension is left blank. Otherwise it throws a 'bad auth' error. Does anybody have any clue? -- Arik Goldfeld -------------- next part -------------- An HTML attachment was

I tried to build VMKit on an ARM device today (a Sheevaplug - armv5te) (native, not cross compiled), and got this error: llvm[3]: Building LLVM assembly with /home/debio/build/vmkit-build/vmkit/lib/Mvm/Runtime/LLVMAssembly.ll /home/debio/build/vmkit-build/vmkit/lib/Mvm/Runtime/LLVMAssembly64.ll ExpandIntegerResult #0: 0x16fbf88: i64,ch = AtomicCmpSwap 0x16e8d84, 0x16fbf00, 0x16fc3c8,

Hi all, I am seeing on my logs this message: Jun 13 09:14:51 DEBUG[4944] chan_zap.c: Monitor doohicky got event Event 160 on channel 3 Jun 13 09:14:51 DEBUG[4944] chan_zap.c: Monitor doohicky got event Event 160 on channel 3 (repeated much more then what I will show here). I see that it comes from static void* do_monitor(void *data) in chan_zap.c, but I do not understand what does it

hi,all i have just set up asterisk 1.6.0.7 rc1 with spandsp 0.0.5 pre4 to ReceiveFAX, link to a E1 (DE410P) using dahdi this can receive the fax from E1 successfully, but i see many error message in the log like this: [Mar 16 09:24:38] ERROR[23540] channel.c: ast_read() called with no recorded file descriptor. when i receive a 5 pages fax, i will see this error message over 200 lines..... it

Dear List, I have had problems inserting some (not all !) figures via odfWeave (using print(someLatticeFunction)...). The figure was correctly displayed in a R device window but the resulting ODF document displayed the correct space for the figure and an empty frame with a "broken image" icon and a "read error" mention. Exploration of the odf (.odt, in my case) file showed

Since upgrading to Debian Wheezy I have been observing large jumps in the value stored in dovecot-uidlist. The effect of these jumps is to confuse some mail clients (Thunderbird, Opera Mail) causing them not to display messages from a (random?) point in time onwards in the affected folder. I have been unable to determine the root cause of these jumps. What I do know: 1. I never observed the

hi all, i have an asterisk install with a digium 4 port fxo card and cisco 7960 sip phones -- running on a compaq Pentium III (Coppermine) at 800Mhz 256KB cache and 1GB of ram. when a call comes in on zap/1-1 for example, the delay between when zap sees the line going to ring state, and when the desktop telephone rings can be as long as 7000 milliseconds (or about 3 or 4 rings on an ear piece).

I'm running FreeBSD 8 on a Sheevaplug (ARM5 processor) I compiled and installed Samba 3.3.9 from ports using defaults and defaults for dependencies. I left the smb.conf file untouched, ran testparm and immediately received the coredump. The same happens running smbd and nmbd. Can anyone help me resolve? http://old.nabble.com/file/p26879957/testparm.core.gz testparm.core.gz -- View this

I installed Trixbox and a TDM400P with 2 FXO and 2 FXS ports and am having an annoying issue with the FXO ports. As soon as I plug either one into the phone line it's as though the line is disconnected i.e. get disconnected tone when trying to dial out, line is busy when dialling in. The CLI shows the following: trixbox1*CLI> zap show channel 4 Channel: 4 File Descriptor: 18 Span: 11*

Hello Out of curiosity, has someone managed to run Asterisk on a Beagleboard for home-use? www.beagleboard.org As an alternative to a PC, it can be powered from a USB hub, so that would make for a compact, fanless Asterisk server. Thank you.

Howdy, New installation, trying to connect an RBS T1 with AMI/D4 framing and E&M Wink. Using a Sangoma A102d and asterisk 1.4.22-2 on Centos5 (Trixbox 2.6.2.1). Outbound calls work fine, but inbound calls fail to read the DID information, and with debug set to 10 I get the following: [Feb 2 19:40:23] DEBUG[25184] chan_zap.c: Monitor doohicky got event Wink/Flash on channel 3 [Feb 2

Hi all, I am reading everything I can find (including this mailling list archives) for the last 2 weeks, on how to handle moved and/or renamed files with rsync. I would have preferred to use an unmodified rsync, and I think I could make it for the ?moved files? with a 3 steps process like this : 1- rsync -avz --delete --backup --backup-dir=$TEMP_BACKUP --existing --ignore-existing

Why is his configure not catching this? It tests for the linkability of these functions on the target arch, and should be detecting their absence if that is actually the case. --Owen On Jul 1, 2009, at 12:50 AM, Xerxes Rånby wrote: > llvm/lib/System/Atomic.cpp contains the call to > __sync_val_compare_and_swap that lowers to the missing > __sync_val_compare_and_swap_4 GCC

Hi, Continuing with the saga of Digium vs MTNL Mumbai, looking for suggestions on handling incoming Caller-ID issues. The card manages to grab a couple of (random) digits of the incoming CID, but they're more or less useless. Is there any way to fix this? Asterisk 1.8.13, Dahdi 2.5.0.1 on Debian Testing (Wheezy), MTNL Mumbai. Digium, Inc. Wildcard AEX410 4-port analog card (PCI-Express)