similar to: Calls being dropped - Cisco 7940 with SIP 8.12 image

When I receive a call, I want to automatically park it from the dialplan so that I can retrieve it later. However, I don't want callers to be aware that they are being parked, so I want to play a ringing tone to the caller. Park() is supposed to be able to do this: Park([timeout][,return_context[,return_exten[,return_priority[,options[,parking_lot_name]]]]]) options r: Send ringing

Hello, I'm Using Asterisk 1.8.11.0 on Debian Squeeze. I was experiencing problems with ${SMSSRC} being blank, so I applied this patch: https://issues.asterisk.org/jira/secure/attachment/42026/sms-sender-fix.diff but otherwise everything is standard. As the subject says, if I am making a call through the phone when an SMS is received, the bluetooth connection drops and the call ends. The

Hi All, Simple scenario: 7940 SIP><NAT Router><INTERNET><Asterisk SIP B2BUA w/Public IP Inbound/outbound calls work fine 2 way audio, features ok, no issues that I can tell so far. 7940 SIP Using Outbound SIP Proxy><NAT Router><INTERNET><Asterisk SIP w/Public IP Phone registers, call in/out SIP Signaling traversing the proxy ok no audio on phone, SDP

hi guys i need some advice for my case that i faced here.. i have Two AD with two different domain, platform and network : i expect all user in different domain can resolve the other domain dns let say 1. domainwin.com >> windows 2008 AD >> 172.16.1.2 2. domainnux.com >> Samba 4 AD >> 172.16.2.2 is it possible if i create 1 new BIND DNS Server in 172.16.3.2

-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 you should set up a dns-proxy and use this proxy as forwarder in your domains Am 08.08.2016 um 08:20 schrieb bentunx: > hi guys > > i need some advice for my case that i faced here.. > > i have Two AD with two different domain, platform and network : > > i expect all user in different domain can resolve the other domain >

As explained in some other thread here you can set up a Bind server with zone type forward for that DNS server forward every requests to your DC (declared as forwarders in these zones). No need of proxy, no need of building master/slaves, just add: zone "domainwin.com" IN { type forward; forward only; forwarders { <IP of some DC in that domain>; <IP of some other

Hi, I'm moving to Systemd for my network management but I don't see my link name changed when I try to using a .link name. The .network file works right, networkmanager is removed as well to accomplish this. Any idea why the rename is not done ? /etc/systemd/network/0-eth.network [Match] MACAddress=00:1a:4a:a9:0a:17 [Network] Address=172.16.3.141/24 Gateway=172.16.3.254

On Mon, Aug 8, 2016 at 5:49 AM, Stefan Kania <stefan at kania-online.de> wrote: > -----BEGIN PGP SIGNED MESSAGE----- > Hash: SHA1 > > you should set up a dns-proxy and use this proxy as forwarder in your > domains Really, really not the same thing as a DNS slave. If your DNS master, such as your Samba or AD server, goes toes up for whatever reason, the DNS slave can continue

I've looked through all the doc and searched the list archives, but I just can't seem to get it to work. I have a Linux box with 5 ethernet interfaces, 3 of which have winboxes I'd like to include in my little Samba network. I'm able to get it far enough for each winbox to see the linbox, but they can't see each other. Here's my setup: Winboxes Linbox Win2k -

Hello, I am running samba 2.2.7a on Red Hat 9. The clients are running Win2k with SP3 and Office XP with SP2. The Samba server authenticates with a WinNT 4 domain controller. When the users open a Word or Excel document there is a 30sec delay before the file opens. From info gleaned from searches on this subject I have tried turning oplocks off altogether, which resulted in Word and Excel

Dear samba@samba.anu.edu.au, Thanks for your recent message regarding `SAMBA digest 1835`. I am out of the office until 14th October 1998. You can contact me after that date. Thanks again! waine@prism-dm.co.uk

Good Day everyone, Yesterday I upgraded the firmware on my 7960 to Sip 8.12 as provided by Cisco, however now the phone does not and will not read the RINGLIST.dat file. I've tried rebooting the phone, tried resetting the phone back to factory, have deleted the RINGLIST.dat file and reloaded the phone then reinstalled the RINGLIST.dat, and still the bloody phone will not read the file.

Dear R users, I have a dataset with two variables: $esan - a grouping factor with 8 levels and $reus. I'd like to do wilcox.test on this dataset as sugested Weiwei here: https://stat.ethz.ch/pipermail/r-help/2007-July/136627.html. I tried to adapt his recommendation but no succes. Can anyone help me? Regards, Iurie Malai, Senior Lecturer Department of Psychology Faculty of Psychology and

Hello I've googled and experimented for the past few hours but am still stuck trying to simply share a temporary directory in read-only with anyone on the LAN. Here's the smb.conf I'm using: ================================== /etc/samba# cat smb.conf [global] workgroup = WORKGROUP encrypt passwords = yes ;wins support = yes ;log level = 1 ;max log size = 1000 ;read only = no guest

Dear R helpers, I am using Beta distribution to generate the random no.s (recovery rates in my example). However, each time I need to save these random no.s in a csv format. To distinguish different csv files, one way I thought was use of Sys.time in the file name. My code is as follows - # My code rr = rbeta(25, 6.14, 8.12) lgd = 1 - mean(rr) write.csv(data.frame(recovery_rates = rr), file =

I have a table like the following. I want to fit Cm to Vm like this: Cm ~ Cl+Q1*b1*38.67*exp(-b1*(Vm-Vp1)*0.03867)/(1+exp(-b1*(Vm-Vp1)*0.03867))^2+Q2*b2*38.67*exp(-b2*(Vm-Vp2)*0.03867)/(1+exp(-b2*(Vm-Vp2)*0.03867))^2 I use nls, with start=list(Q1=2e-3, b1=1, Vp1=-25, Q2=3e-3, b2=1, Vp2=200). But I always get 'singlular gradient' error like this. But in SigmaPlot I can get the result. How

Hello all, I'm relatively new to "R" and programming in general - I had previously used MatLab, but decided to make the transition to R, as the computational times are much better! Anyway, I'm trying to use R to run a gamma distribution model to estimate mean transit times of water moving through a hydrological catchment. My input are 3 .txt format files as follow:

I'm trying to write a function to find the means over factors of the responses in a mlm (something I would do easily in SAS with PROC SUMMARY). The not-working stub of a function to do what I want is below, and my problem is that I don't know how to call aggregate (or some other function) in the context of terms in a linear model extracted from a lm/mlm object. means.mlm <-

Duncan, Here are the complete benchmarks rerun against gcc 4.5.4 built with... Using built-in specs. COLLECT_GCC=gfortran-fsf-4.5 COLLECT_LTO_WRAPPER=/sw/lib/gcc4.5/libexec/gcc/x86_64-apple-darwin11.0.0/4.5.4/lto-wrapper Target: x86_64-apple-darwin11.0.0 Configured with: ../gcc-4.5.4/configure --prefix=/sw --prefix=/sw/lib/gcc4.5 --mandir=/sw/share/man --infodir=/sw/lib/gcc4.5/info

Starting up sendmail I get: Starting sm-client: can not chdir(/var/spool/clientmqueue/): Permission denied Program mode requires special privileges, e.g., root or TrustedUser. I assume the user used for sm-client is smmsp. However, that user has /var/spool/mqueue as homedir and I added him to the trusted users list. FYI, that user has disabled login (which should be okay) and the group has a