similar to: How to get "Call-ID" SIP header outside "chan_sip" scope ...

Hello there! We are planning to use Asterisk on our VoIP platform, and we are spending some brains on a way to provide the following facility: let some SIP user (extension) registrate with more than one client (ATA, SoftPhone, VoipCelular, etc) - what isn't a problem at all -, initiate calls from any of this devices that are registrated with the same user - no problems on tests too -,

Hello there! During some research on Internet I found the following comparison on site Voip-Info (see, "http://www.voip-info.org/wiki/view/OpenPBX.org+FAQ"): The main points listed on Asterisk's "CONS" that concerned me were: * Conferencing on Asterisk depends on Zaptel hardware and/or kernel modules for timing; * Lack of built-in STUN support for SIP NAT

Hello there! I'm testing "Dial" call limit option on Asterisk version 1.4.26, but it's not working. The issued command is: "Dial(SIP/${EXTEN}|20|RtT|L(300000:60000:20000))". Am I missing something ? Does it only work with Asterisk version 1.6.X ? Thanks and best regards, -- __At.,

Hello there! I was testing Asterisk for the last two weeks using the Realtime driver for MySQL, and leaving "rtcachefriends=yes" configured to enable MWI. Today I started making additional tests with "rtcachefriends=no" because we will probably need to use Asterisk without this cache. For some strange reason, calls stop to get routed between the SIP clients. I've

Hello there! I need some help to configure two Asterix boxes to route calls using SIP. I followed the instructions present at this site: "http://astbook.asteriskdocs.org/en/2nd_Edition/asterisk-book-html-chunk/connecting_two_asterisk.html", but I couldn't get it working so far. The only difference, besides the names that I've used, is that I'm using realtime to retrieve

I have just setup asterisk on a debian sarge box. I am running Asterisk 1.21 with AMP and chan_capi_cm 0.6.1 using a BT Speedway (AVM Fritz) ISDN card, connected to a BT ISDN2e line. Currently we have 6 extensions (SIP) configured all using CounterPath(Xten) eyebeam softphone. After many hours of Googling I have finally got it all setup and working. We can transfer calls internally and make and

What does this mean? Asterisk 1.2.13 talking to 1.4.0. (response from 1.4.0.) Yuan Liu

Hi, I have a particular situation that syslinux could access a i2c bus to get some data from specific device that my hardware has. Based on these data, syslinux should or not to boot. It's feasible to create some i2c infraestructure to syslinux access i2c bus? It could be used to something more than only my needs? I digged in gpxe code and it has code to provide some i2c functionality.

On CentOS5 with the latest updates applied, the logwatch filter for postfix returns way too many lines from the log. I get an "unmatched entries" message and all messages that have gone through the system is listed. Here is an example: 8F930A8092: to=<morten at foo.bar>, orig_to=<morten at localhost>, relay=local, delay=0.19, delays=0.06/0.01/0/0.12, dsn=2.0.0,

Hello, How can I get peerip, recvip, from, uri, useragent, peername, t38passthrough variables in (within) my custom Asterisk application? I can't use chan_sip.c internal structures (such as sip_pvt) in my custom application, because there's no chan_sip.h and I can't include it into my application (maybe there's other way?). I can do like this: exten =>

I know I'm getting tired of looking at code, but why is the function register_verify defined in 2 different files? chan_iax2.c line 3860 static int register_verify(int callno, struct sockaddr_in *sin, struct iax_ies *ies) chan_sip.c line 4869 /*--- register_verify: Verify registration of user */ static int register_verify(struct sip_pvt *p, struct sockaddr_in *sin, struct sip_request *req,

Hi, My name is Erick and this is my first email on forum. My infraestructure is: Intranet with 2 pcs.. 1 dhcp for general use and net access (192.168.0.130) 1 static ip for Xen Dom0 (192.168.0.100) on 192.168.0.100 i have one DomU with ip 192.168.0.50 on 192.168.0.130 i use putty to connect to 192.168.0.50 (this work) i have nginx installed on 192.168.0.50! If i use "links browser"

On Thu, 2014-02-27 at 11:49 -0800, H. Peter Anvin wrote: > On 02/27/2014 07:51 AM, Jo?o Henrique Freitas wrote: > > Hi, > > > > I have a particular situation that syslinux could access a i2c bus to get > > some data from specific device that my hardware has. Based on these data, > > syslinux should or not to boot. > > > > It's feasible to create

Hi folks, Recently a customer of us moved his "old" asterisk installation, an 1.4.44 to a VMWARE infraestructure and has started having some weird issues. Asterisk started going slow and even refused to start up. After few tests, it only loaded when deactivating queues and iax2 (with noload in modules file). The thing is that it had been working with these modules loaded and lately it

Hi! First at all here is a infraestructure brief description: +-------------+ | SAMBA |eth_a----------LAN_A | PDC | +-------------+eth_b----------LAN_B eth_c | | | +--------------+ | | | GATEWAY |--------------LAN_C | | +--------------+ Now the issue: When we run a ping test from "LAN_C",

Hi, I'm using Asterisk (1.2.4) as a voicemail system for our Softswitch. When forwarding a call to Voicemail, here is somehow what the softswitch sends to Asterisk : In INVITE : Vm Phone Number ( to route the call ) In To : Person who has been called ! In From : Person who was calling ! Of course, I need to send the call into the "Called User" Mailbox (Thus To SIP header) ! So

On Wed, 29 May 2024 09:40:42 -0300 Ivan Lopez via samba <samba at lists.samba.org> wrote: > Hi!. I've already read that really useful notebook. Thanks for it. > Sadly, I couldn't find any differences. > > All seems work OK without "username map" but as soon as I map > OURDOM\Administrator to root v?a "username map",? I lost "Sessions"

Hi!. I've already read that really useful notebook. Thanks for it. Sadly, I couldn't find any differences. All seems work OK without "username map" but as soon as I map OURDOM\Administrator to root v?a "username map",? I lost "Sessions" and "Open files" in RSAT, so I would like to know if I miss something without that mapping. Does RSAT

Hi. I'm proposing a wireless distribution system in infraestructure mode for a valley with no cables and distant houses, respect to Asterisk, I can get a company I work with to provide me with E1 and use LCR to get 4 different telcos based on prefix. I've been reading a very interesting paper about voip on wireless, i recommend it really

Hi, Thanks, Well winbind enum is needed, and ntlm auth is required by some applications, seems that samba has disabled by default but windows has enabled, we have to migrate some old applications I understand taht is OK with yout comments thanks Missatge de Trenta sis <trenta.sis at gmail.com> del dia dl., 23 de set. 2019 a les 11:22: > > Hi, > > I have used testparm. >