similar to: Simple dialplan issue

Hi everyone! I'm quite a newbie at this Asterisk stuff so please bear with me. We've recently decided to start training in Asterisk via AsteriskNow! Asterisk version is 1.4.18.1 through AsteriskNow! 1.02 The box we have is paired with a Digium TE110P and we've managed to get it to the point where incoming calls via a single DID (from NTT Japan) can be received and answered

I am using VoiceOne http://voiceone.it/ as my management interface. I am not 100% sure when it started, but my CDR is now full of "s" as the DST instead of the actual dialed number. As I understand it - it is because it is being recorded in the CDR while in a macro (as below). Is there any work around so that I can record the actual dialed number? [macro-dialout] exten =

No Jeremy, excuse me, the error was in my email. The correct command is /bin/echo "Channel: Local/$1@chiamamezzi-dialout";\ /bin/echo "Variable: callid=123456|number=$1|url=pippo|menuid=FOP|redirectnum=0554202880";\ /bin/echo "Context: chiamamezzi-Wave";\ /bin/echo "Exten: s";\ /bin/echo "Priority: 1";\ /bin/echo "Callerid: Asterisk Automatic

Michel Send me the same output for a dial string that only sends the *31* Is this an ISDN line? What type of card/signalling/switchtype are you using? It looks as if the PSTN switch accepts the *31* and then hangs up so you can make the NEXT call with the *31* feature enabled. If so I assume the *31* feature will be enabled for the next call on the ENTIRE SPAN if it is an ISDN trunk group. If

Hi All, i want to configure voice mail on Asterisk 1.4 for multiple users. let me explain you the scenario. i have 10 users with the name of 1000,2000,3000,4000,5000,6000,.......and these user can call to each other. Now i want to configure separate voice mail box for separate user. my extensions.conf ..... settings below.. [voicemail] exten => _X.,1,Dial(SIP/${EXTEN}) exten =>

I am seeing some curious behaviour with a 1.2.32 system, which I do not understand and so can't work out how to fix it. I have a PRI routed to context default. Here is the complete default context: [default] exten => _9X.,1,Dial(IAX2/m1peer/${EXTEN:1}) exten => _20XX,1,Dial(IAX2/sipeer/${EXTEN}) exten => _X.,1,Dial(IAX2/m1peer/${EXTEN}) exten =>

hi ppl, i'm using asterisk 1.2 because i'm making use of voiceone, but before i was using asterisk 1.4 and had the same problem, it concerns an italian voip/sip provider called eutelia/skypho, my problem is the following one: when i start my pbx my skypho account is working fine, meaning that e.g. incoming calls are shown in the asterisk CLI and caller and callee can hear each other when

Hello, We have a strange situation (asterisk 1.6.2.14), where we get a result for DIALSTATUS for BUSY and No-ANSWER, but nothing for CANCEL. This is the (relevant) test dialplan: -------------------------------- [incoming-private] exten => _X., n, Dial(SIP/1001,30) exten => _X., n, NoOp(${DIALSTATUS}) exten => _X., n, Gosub(incoming-status,s-${DIALSTATUS},1) [incoming-status] exten

I'm trying to write a dialplan that will allow me to "stress" test it. I want to be able to dial an extension, or pretend that the extension is busy or out of order (so that I can see what to do) given the dialplan snippet: [outbound] exten => _X.,1,NoOp(${TEST}) exten => _X.,n,Dial(SIP/${EXTEN}) exten => Busy,1,Busy(2) exten => Busy,n,Hangup() exten =>

Hi, BRIEF RESUME: Is there any other way to obtain the same result but being easier to configure?? Thanks! EXTENDED RESUME: i've configured a, rather difficult, macro that even for me without being documented is difficult. I ask for the help of the experts to know if the functionality it apports can be achieved better in another way. What i'm trying is to enable call a channel (e.g.

hi ppl :D my configuration is as follows, i run (let's call it machine 2) debian etch 4.0 and asterisk 1.2, i use voiceone (www.voiceone.it) as an interface to manage asterisk, I have a grandstream/handytone 486 as a sip device, no PSTN line or anything like that all SIP only. I have a machine (machine 1), which functions as my router and machine 2 and sip device are behind it, grandstream box

I can't seem to get the [s]tart to work in my extensions... ----- s n i p ----- [default] exten => s,n,Goto(s-${DIALSTATUS},1) exten => s-BUSY,1,Voicemail(${EXTEN}, b) exten => 2403,1,Dial(sip/${EXTEN},20,t) exten => _X.,2,Playback(pbx-invalid) ----- s n i p ----- If I dial '2403' with is off-hook, I don't get to the voice mail, I get the playback... Setting

Folks, When I have a dial string like this: Dial(SIP/3254101&SIP/3254102,20,tr) and I want to check the ${DIALSTATUS} variable after the dial, how do I know which number I am getting the variable for? And, what about this? Dial(SIP/3254101&SIP/3254102@proxy1,20,tr) What happens in that case? How can I get the ${DIALSTATUS} variable for EACH NUMBER dialled? Thanks, Doug.

Hi, For some reason (outbound call tracking) I've got a few different outbound call process (using a macro for queuemetrics logging, or direct call) i wanted to factorise the routing process so i came up with something like the following. All in one it's working like expected, however every "ael reload" command trigger a lot of warning like that "application call

Hello list. We just upgraded to 1.6.1.11. We are using real time information stored on mysql databases. That is all running fine. Now, since we upgraded, some member don't get calls from queues. In CLI: "queue show" shows something like: 611 (Local/611 at agents) with penalty 20 (realtime) (*In use*) has taken no calls yet We use the extension 611 in different computers, in the

hi list, I set up a new asterisk machine with asterisk 1.2.13 and misdn 0.3.1rc27. I use an e1 card with sip clients. My extensions look like this: [E1] <snip>...<snip> exten => 33006733,1,Set(CALLED=${EXTEN}) exten => 33006733,2,Dial(SIP/1@192.168.0.23) exten => 33006733-ANSWER,3,Answer() [SIP] exten => _X.,1,Noop() exten =>

Hi all, I am from India and has been recently using asterisk for testing and enahncing my telephony knowledge. I am trying to use the originate Command from the Asterisk manager on both SIP and ZAP. The command works successfully but does not return any DIALSTATUS such as BUSY,ANSWER,NOANSWER as in case of command DIAL when used from the dial plan. Can some one guide me how to get the vaue of

Hi All, I'd just like to verify what the correct operation of the timeout parameter is for the dial application. I'm not sure if I've encountered a bug or a configuration issue. When a sip phone is not responding to invites on an outbound call, the dial application still waits the duration of timeout before continuing with dialplan execution. I was under the impression that app_dial

Hi all, I'm using Asterisk 1.0.9-BRIstuffed-0.2.0-RC8o on box A with a TE410P (EuroISDN cpe) connected to another similar asterisk box B acting as EuroISDN master. I'm performing some load tests by contiously feeding up to concurrent 30 call files to /var/spool/asterisk/outgoing/ on box A which inititate via a dialplan context/extension a outbound call (redirected via chan_local) to

I am trying to setup one time caller id block on my system(activated when an incoming call matches *811XXXXXXXXXX), and I have had little to no luck. Could you take a look at my context/macro definition and help me figure out what I am missing? Here is my context for my dialplan: include=default plancomment=user-default