similar to: Hung Lines on GXP2000s?

Hey Gang, Trying to figure out how I can do the following (have each part working individually but drawing a blank on combining) 1) click on-screen which sends an AMI originate (works fine) 2) the originated call is to an internal extension that looks up the number to be dialed (works) 3) then via Perl, adding in a SIPAddHeader for answer-after=0.. (works separate from the above) What I

Hey gang, Trying something a little funky with a click to dial app. (Perl AGI) It's working fine but I'd like to change what displays in HUD's screen. Right now it's showing "Unknown". I've tried setting various CDR fields but can't seem to change the display. I've tried setting CID and other AGI variables but nothing seems to affect that display. Any

Hey gang, I'm trying to find a) If you can put channel variables into a Call file and b) what the appropriate syntax is. Any ideas? Thanks, PB -------------- next part -------------- An HTML attachment was scrubbed... URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20090721/cb8c2656/attachment.htm

Hi all, i am having a major asterisk problem. I think it started around 1.2.19 but could also be 1.2.18 zaptel or 6.5.10 snom 360. basically we start getting busy signals, all our 4 line hunt group is busy, i then check the channels and there are open calls that were hung up long ago. i thought it was a zap problem but then i saw the same problem with iax2 calls. its becoming a huge issue

Full_Name: Xiao Gang FAN Version: 2.4.0 OS: Windows Submission from: (NULL) (159.50.101.9) > library(chron) > as.Date(as.POSIXct(strptime("1994-01-24","%Y-%m-%d"))) [1] "1994-01-23"

I have just started using ggplot2 and I seem to be doing something stupid in writing ggplot2 commands on more than one line. In the example below the commands on one line are working fine, but as soon as I put them on two lines I get an error. Can any one point out what I am doing wrong? It must be something blindingly simple. Thanks Example

I have a PAP2 with 2 phone ports. When I call them everything works fine until I hung up the call. There is about 30-40 seconds until I can call to that extension again. Before that it gives me busy messages. Extension config: exten => 199,1,Dial(SIP/199,30) exten => 199,102,Hangup Any suggestions? Thanks

I'm having many troubles with x101p (orginal from Digium, wcfxo kernel module) on analog line simulated by a Cisco Router I'm experiency random hung up while zaptel doesn't recognize call progress (Italy signalling) Signalling is simple ignored as if someone hangs up on the other end of the analog line, on the asterisk end is it possible to listen the busy tone as generated from

I have a normal setup of calls coming in on analog lines (4 of them) coming into an old KX1232 pbx. I have those lines forwarded to a T1 card in the KX1232 going over to my T1 card, it then uses IAX going over to my REAL asterisk pbx. (these steps are there for testing and other items) Anyway after a 10 minute call asterisk gives a faint beep, beep, beep and then hangs up the line. Is there

There are no cordless devices in this situation. :) Jerry Geis wrote: >/ I have a normal setup of calls coming in on analog lines (4 of them) />/ coming into />/ an old KX1232 pbx. I have those lines forwarded to a T1 card in the />/ KX1232 />/ going over to my T1 card, it then uses IAX going over to my REAL />/ asterisk pbx. />/ />/ (these steps are there for testing

Hi, Has somebody experiences with the Grandstream GXP2020 / 2000 phones in a business graded installation (with really traffic on .... not 3 calls a day ;-) ) Of course with Asterisk PBX (1.4.1 or 1.4.11 or 1.4 in generall) Thanks! Kind Regards, Erik

I've got my asterisk server in the DMZ of my local LAN - I've used my Budgetone and GXP2000's from the Internet- on direct IP connections with no problems. However, I'm about to deploy about 5 phones (either budgetone or GXP2000's) all on a LAN behind a NAT- on a different network than the Asterisk server. Should I look into using STUN servers? Will this setup be a

Sorry, gang. The FAQ didn't seem to answer me, nor did Googling... I merely want a simple solution to do the following: I am setting up a streaming server for in-house use. I want it to broadcast the RAW MP3 DATA from my actual MP3 files, as I listen to them in xmms. In other words, I DO NOT want: XMMS ---> decode to wave ---> re-encode to MP3 ---> icecast ---> listeners I

Hello Everyone,   I've been learning to use R in my spare time over the past several months. I've read about 7-8 books on the subject. Lately I've been testing what I've learned by trying to replicate the analyses from some of my SAS books. This helps me make sure I know how to use R properly and also helps me to understand how the two programs are similar and different.   Below is

Hi, I had an interesting problem with a Samba server recently, and I think I know what happened. But I want to post here to see if those wiser than I can confirm this or give me a better explanation of what went awry. I initially noticed around 8:35 AM samba wasn't working at all, and that my server had huge load averages indicated by "uptime". Though in "top" I could

I have 20-30 GXP2000's connected to * over a T1 line. Neither end is NAT'd and there is plenty of bandwidth available over the line. The GXP's are 1.1.5.15, which is the latest. I have a problem where the phones keep dropping off of * and I get a "failed to register" message in the log of *. Sometimes they eventually connect and sometimes, I have to reboot them to

I would like to add some vertical lines to a lattice plot of histograms. What I am after is a lattice version of abline(v = 1234). The lattice histogram plot is just: histogram( ~ LTSE | approach, data = arrivals) Can anyone point me in the right direction for this? David Scott _________________________________________________________________ David Scott Department of Statistics The

Hi - I've got a new install with a Sangoma A200 and a few GXP2000's. When users are talking over the Sangoma, they get a lot of sidetone (local echo). Internal calls are fine. Where do I adjust that? I assume its in zapata.conf somewhere? thanks Todd

Hello, I have the following sample dataset. sex <- as.factor(c(rep(0,12),rep(1,12))) char <-

Here is a fix that prevents the encoder from spending too many bits on keyframes. The main problem is that the old code computes the target keyframe bitrate incorrectly. This causes the code that computes the Q for the frame to think that it has tons of bits to spend. It selects a high Q value for the keyframe. Since so many bits were spend on the keyframe the the inter-frames have to use a much