similar to: SIP Error

My dialer works perfectly , but whenever I dial a number manually from xlite and press a Key like 6055 for DTMF , line gets disconnected. Line gets DC as soon as I press any key from xlite What could be the issues ? I tried the SAME VOIP from another center and Its Ok there. I tried the Same dialer Xlite over Static IP, problem is there. I tried the same number from other Dialer , it works

My Inbound calls lands , but line get disconnect in exactly 3 secs. Here goes my extension.conf setting : [from-ipkall] exten => 901835,1,Ringing ; call ringing exten => 901835,2,Wait(1) ; Wait 1 second for CID delivery from PRI exten => 901835,3,Answer ; Answer the line exten =>

REPOSTED with MORE Info and Modified Subject Line: -------------------------------------------------------- I am using one of the Minute Provider to dial out USA numbers. Now in one of my process, we need to Dial IVR and the enter DTMF digit and then it connects to the automated IVR. When I dial out the IVR directly using Xlite and VOIP Mins provider , it works perfectly. but when In try from

All my calls are getting DECLINED when I am trying from xlite : CLI shows : May 18 00:00:32 WARNING[4617]: channel.c:2781 ast_channel_make_compatible: No pa th to translate from SIP/cc101-b790c1d8(4) to SIP/sip19-090e87d8(256) May 18 00:00:32 WARNING[4617]: app_dial.c:1628 dial_exec_full: Had to drop call because I couldn't make SIP/cc101-b790c1d8 compatible with

Hi, We are using Vicidial and sometime even when agent disconnects, outgoing call originated by dialer is still active. Since call was initiated by dialer and then bought into meetme conference of agent and we can't corelate this call to any agent channel. When agents are dialing, channels doesn't show calls vicidial2*CLI> show channels Channel Location

== Manager 'sendcron' logged off from 127.0.0.1 vicidialnow*CLI> dial 919545090201 -- Executing AGI("OSS/dsp", "agi://127.0.0.1:4577/call_log") in new stack -- AGI Script agi://127.0.0.1:4577/call_log completed, returning 0 -- Executing Dial("OSS/dsp", "SIP/19545090201 at sip203||tTor") in new stack -- Called 19545090201 at sip203 Feb 2 13:36:38

I use Xlite and Asterisk. Now, everything was working fine till yesterday. But when my agent tried to login to asterisk through xlite, I see below line sin CLI : == Manager 'sendcron' logged on from 127.0.0.1 -- Got SIP response 486 "Busy Here" back from 192.168.0.17 > Channel SIP/cc101-08969e60 was never answered. == Manager 'sendcron' logged off from

*Code:* == Manager 'sendcron' logged off from 127.0.0.1 -- Executing Playback("Local/91441425477394 at default-b9f2,1", "sip-silence") in new stack -- Playing 'sip-silence' (language 'en') -- Executing AGI("Local/91441425477394 at default-b9f2,1", "agi:// 127.0.0.1:4577/call_log") in new stack -- AGI Script

Hi All, I have searched the various post and not able to find the solution. I am using Asterisk 1.4.21.2 for outgoing calls. Earlier i used ZAP trunk and it works fine. Now i need to move to SIP trunk and configured the same. When i try from softphone i got error as "Call rejected" and in the asterisk i got error as

Hi All. I have many days reading and research about asterisk and vicidial. I thing this issue is about asterisk and doesnt about vicidial. Isn't it? I have a problem with theses application (I already ask for help in vicidial forums), but I can not fix it. I have debian 5 with asterisk 1.2.24 and vicidial 2.0.4. This server has a IAX tunnel with another asterisk server B which connect to

We are using G711 for phones to talk to Asterisk and G729 licenses at asterisk to talk to ITSP Could you please suggest transcoder to use from G711 and G729 and which is comptible with Asterisk. We will like to avoid using TDM if possible Also i remember that initially we didn't have G729 and were using only 711 for with vicidial but then also we had same problems. at that time it was only 2

Hi sir, I was installed Goautodial server and I have b410p BRI card. BRI card showing OK with dahdi_tool, this NT mode. whenever I am dialing from server i am not able to connect the call . in Cli below mention warning is comming . please what is the mistake with me . help me Executing [0559566768 at default:1] AGI("Console/dsp", "agi:// 127.0.0.1:4577/call_log") in new

I tried this http://lists.digium.com/pipermail/asterisk-users/2008-January/203615.html But I am NOT getting call in asterisk. SIP.conf file : _________________ [general] port = 5060 bindaddr = 0.0.0.0 context = default externhost=59.160.44.21 localnet=192.168.0.2/255.255.255.0 ; register SIP account on remote machine if using SIP trunks ; register => testSIPtrunk:test at 10.10.10.16:5060 ;

Hi all, I have an Astribank connected to Asterisk 1.4. I'm setting up extensions and I have a problem with inbound calls to zap extensions. The phone at 65 rings once and then the line gets hung up. If I pick up the phone really fast, it works. Any suggestions? I have the following setup: [from-pstn] exten => 207582401,1,Dial(Zap/65,30) CLI shows me this: -- Accepting call from

I'm looking into the dialplan specifics: tleilax:~ # tleilax:~ # cat /etc/asterisk/extensions.conf [general] static=yes writeprotect=no [globals] CONSOLE=Console/dsp ; Console interface for demo TRUNK=DAHDI/r1 ; Trunk interface TRUNKX=DAHDI/r2 ; 2nd trunk interface TRUNKIAX=IAX2/ASTtest1:test at 10.10.10.16:4569 ; IAX trunk

I am getting this Error on my Asterisk. How to solve it ? "ERROR[2654]: chan_sip.c:11355 handle_request: Missing Cseq. Dropping this SIP message, it's incomplete." -------------- next part -------------- An HTML attachment was scrubbed... URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20090115/cb953962/attachment.htm

IVR Number :17275691533 When I try it from xlite configuring my provider directly, it works perfectly. When I try to dial out from dialer , it doesnt work. [sip8] type=peer username=user fromuser=user authuser=user secret=password host=8.14.146.111 nat=no canreinvite=yes insecure=very disallow=all allow=g729 allow=ulaw context=default dtmfmode=rfc2833 What cld be the reason ? --------------

Hello. I have an Asterisk server (ViciDialNow) set up behind NAT. I can manage to make outbound calls, but the communication drops off after 30 seconds or so. I'd really appreciate having some assistance from the mailing list on this issue. So, I'm having an Asterisk server behind a firewall and Zoiper softphones on SIP connecting to Asterisk on the same local area network. The

Sir, i am using goautodial server , bri card is showing ok but when i try to call that showing below , This configuration is in doing in dubai , so kindly help me how can connet the call from this , what is my mistake is in this :::chan-dahdi.conf [channels] #include dahdi-channels.conf language=en context=default usecallerid=yes hidecallerid=yes callwaiting=yes usecallingpres=yes

Hi All; Really I need to know why when using the "h" in the exten =>, then we use DeaAGI with it? I am using vicidial and I see this line alot, so I need to know how it work (when it will be executed): exten => h,1,DeadAGI(agi://127.0.0.1:4577/call_log--HVcauses--PRI-----NODEBUG-----${HANGUPCAUSE}-----${DIALSTATUS}-----${DIALEDTIME}-----${ANSWEREDTIME}) The question is: When