similar to: Re: Three simple problems

I've a line like this that creates /dev/pilot link in my local udev rules: BUS="usb", SYSFS{product}="Palm Handheld*", KERNEL="ttyUSB*[13579]", SYMLINK="pilot" And it seems to work fine for doing normal sync operation to Gnome Palm applet (well, not sure about that KERNEL parameter, however ttyUSB0 and ttyUSB1 look exactly the same, no other way to

I have three problems with wine. Wine set up a pseudo windows directory system under my home directory/wine. My application resides in the created 'Program Files' directory and a necessary file placed in the windows/system directory. 1. If I click on the exe and run with wine it works without error. However I seem unable to set up a path to the exe as in 'wine "drive_c/Program

Hi, I'm having trouble getting my Palm to sync with jpilot on my Centos system via USB. When I sync, I get this error in jpilot: pi_accept Illegal seek Exiting with status SYNC_ERROR_PI_ACCEPT Finished I have jpilot syncing fine with this Palm over the network, BTW. For USB, I set things up for udev as described on various websites. Here are the relevant ports & symlink (created

How do you go about configuring comm ports in Wine? I have a usb to serial adapter that is using ttyUSB1 under linux. The program I want to use under wine shows only the standard Windows comm ports; i.e, com1, com2, etc. How can I redirect those to ttyUSB1? dick

A while back I got help in getting my Palm Pilot to connect to CentOS, and through the advice I got here I was able to successfully back up my files to the computer using the CentOS default Palm utility. However, I now want to use JPilot to sync and install files. But when I attempt to sync through JPilot, I get the following error: ******************************* Syncing on device /dev/pilot

Hi All I am connecting a ups via a usb to serial converter. Works fine, however when the converter is unplugged and plugged back in, udev creates another device e.g instead of ttyUSB0 it creates ttyUSB1. Here is the udev rule that I added to the top of the 025_nut-usbups.rules file in order to create a static symlink should udev decide to create the device as either ttyUSB0 or ttyUSB1.

Wine does great job for GUI on screen (PC Oscilloscope) But, can't USB connect to external hardware device that has FTDI 245AM chip in it. See device in /dev/ttyUSB0. See device in lsusb, also in lsmod. Did normal linking, ln -s /dev/ttyUSB0 /.wine/dosdevices/com3. No luck. See the link with: ls -al of dosdevices. Using COM3 because in Windows registry in Wine, it says COMPORT=3 Any help?

Hello, I have a strong suspicion that something is not working right on my el6 laptop. I have a usb 3g dongle that works fine on windows and ubuntu. It's one of those ZTE dual-personality devices (usb id 19d2:2000). When it's plugged in, it appears as usb storge device, then needs to be ejected, then it appears as usb modem with few serial ports. This is handled properly by udev on

I have been trying to get an EVDO modem to work with Centos 5. I can make it dial out with wvdial only when I'm the root user. Otherwise I get this error: Cannot open /dev/ttyUSB0: Device or resource busy I added the user to the uucp group. crw-rw---- 1 root uucp 188, 0 Dec 3 02:30 /dev/ttyUSB0 crw-rw---- 1 root uucp 188, 1 Dec 3 02:30 /dev/ttyUSB1 crw-rw---- 1 root uucp 188, 2 Dec

>> I setup apcsmart driver on port /dev/ttyUSB0 in ups.conf and check that runing user=root. >> > user=root is only for testing- this may cause other permissions problems later. It looks like the simplest way to handle this on Debian is to add the system 'nut' user to the 'dialout' group: $ sudo adduser nut dialout > I have been meaning to collect some

Hi I have a serial UPS connected using a serial2USB device. Usually it is port=/dev/ttyUSB0, but occasionally i need port=/dev/ttyUSB1. How do you guys handle something like this? JonB

I've looked up the Kpilot manual, and I think I have an okay idea of what's going on with it. I'm trying to get it's detection feature to find my Palm Pilot. CentOS does seem to be able to recognize it, because if I run lsusb when running a hot sync, I get the following: [root at localhost dev]# lsusb Bus 001 Device 010: ID 0830:0060 Palm, Inc. Palm Tungsten T / Zire 71

Hello, I have an application that sends data out to a serial port, then should receive the reply. After some hassles I got the application to enumerate the serials (in a dialog box where you select the port), and after creating the link in dosdevices (in lower case I should note, wine will not recognize COM1) it actually starts sending out data (verified using a terminal on the other end). But

Hi, I attached a mobile phone (its name I-MATE SMART PHONE) to a box running CentOS 5 by using a usb cable which came with that phone. Now, it shows /dev/ttyUSB0 Now I want to send a sms to my friends. I installed gammu. Pls see below for installed rpm. [root at mailgw ~]# rpm -qa |grep gammu gammu-1.11.0-1.el5.rf here's my /etc/gammurc file. [gammu] port = /dev/ttyUSB0 ;model = 6110

Hello! I've ran into this annoying issue when setting up a new server. I have an APC SmartUPS hooked up on a USB-serial converter on /dev/ttyUSB0. This works nicely, until: hub 3-0:1.0: port 1 disabled by hub (EMI?), re-enabling... pl2303 ttyUSB0: pl2303 converter now disconnected from ttyUSB0 usb 3-1: pl2303 converter now attached to ttyUSB1 apcsmart gets into an infinite loop of this:

[please use the nut-upsuser@ address rather than nut-upsuser-owner@ and be sure to use Reply-All - thanks!] On Dec 23, 2014, at 1:52 PM, Janez Kremzer <janez256 at gmail.com> wrote: > Hi! > > I woud like to use Raspberry Pi with NUT installed whic coud shut down NAS in the office. > NAS doesn't have comport and this is the reasion why not to use NAS directly. > >

I am trying to get JPilot working. I have configed gnome-pilot-applet, but it is not talking to the USB connected Treo650. My Treo has my name as the user, so from the applet, I see also a userid (my UID on this system it seems). I try to put that on the Treo and nothing happens. I have enabled the Backup Conduit. I am using /dev/pilot, which shows up when my Treo is connected via its USB

Hello everyone and best wishes for 2023 :) I have an old *Garmin Drive Smart 50 GPS* and I want to be able to attach it when it is in preboot mode to a VM hosted by a *Debian 11 host*. From what I understand, the preboot mode allows us to flash a firmware before the GPS actually starts (used among other things when the GPS is soft bricked). When I connect the GPS to the host it gives:

I am running SuSE 8.0 (waiting for 9.2). I have a windows application I wanted to run using wine. It ran fairly well then locked up on the old wine release that came with SuSE 8.0. Thought I should get the latest wine so downloaded the current wine for Suse 8.0 from winehq.com. I first ran Yast and removed the presently installed wine. I put the new rpm in /root and logged in as root then

Hi! I'm trying to use dongle in my Asterisk But appear for me all time this error [Feb 12 13:49:10] ERROR[13347]: chan_dongle.c:442 do_monitor_phone: [dongle0] timedout while waiting 'OK' in response to 'AT' -- [dongle0] Error initializing Dongle -- [dongle0] Dongle has disconnected -- [dongle0] Trying to connect on /dev/ttyUSB1... -- [dongle0] Dongle has