similar to: Asterisk MWI issue

Hi, My Trixbox 2.8.0.1 installation includes the following Asterik version: 1.6.0.9-samy-r27 I am having some problems with it and I think they might be solved if I use the latest Asterisk version. Is it a good idea to update Asterisk in Trixbox externally ? Is it safe ? If so, which version should I prefer ? 1.6.1.5 or 1.6.0.14 ? Thanks, ilker -------------- next part -------------- An HTML

Hi, I have a multi-isp configuration both on ppp interfaces. As one of them is 32Mbit/s and the other is 8Mbit/s , I have a weight setting of 4 to 1 as in the following providers file entries: vdsl 1 0x10000 - ppp1 - track,balance=4 adsl 2 0x20000 - ppp0 - track,balance=1 I would also like to have fallback between them so that if one is

Hi, I'd like to disable MWI on certain lines of my IP650 Polycom phone. So I removed the "mailbox=" parameter from that line's peer section in sip.conf. Yet the envelope still appears in front of that line and the phone MWI keeps blinking. Where should I look to completely disable MWI on a certain line? Thanks,

I just registered an Avaya 9620 set to my Astlinux system (0.47 - Asterisk 1.2.22), using Avaya SIP Firmware version 2.0.1.34. Set mailbox=ext at default in the sip.conf Found MWI worked immediately. Turned off as expected. Have Fun! Tom -------------- next part -------------- An HTML attachment was scrubbed... URL:

Hi all, I'm trying to configure an * box for my home in an embedded device, so I want a minimum configuration. I've already configured it to connect to my SIP provider and my IP phones and ATAs, so far so good. My SIP provider gives me voicemail service and I'm happy with it. I don't want to run voicemail services in my * box. Is it possible for asterisk to subscribe to my SIP

Hi all, I'm new to the list, so I apologize in advance if I'm beating a dead horse by asking this, but I read somewhere that asterisk 1.4 has MWI working for Avaya and their rather troublesome SIP firmware. Can anyone verify this before I go changing phone systems around? Thanks Derek -------------- next part -------------- An HTML attachment was scrubbed... URL:

Is it possible to pass the Message Waiting indicator from an analog line to a DAHDI port and into asterisk (and to an extension)? Thanks, Brian

Hey everybody, I've just spent the last two hours Googling and searching the Wiki. I'm trying to find if there are any listings of codes for the Avaya Definity G3R, to allow for an Asterisk system to turn on/off a phones MWI that is attached to a G3. We are looking to use an Asterisk system as a voice mail server. I'm not having any luck, anybody have such information? Thanks,

Has anyone gotten MWI working with Broadvoice? Whenever I try to set it up via mwi => it gives me an error. Thanks Nick -------------- next part -------------- An HTML attachment was scrubbed... URL: <http://lists.digium.com/pipermail/asterisk-users/attachments/20130407/1756e072/attachment.htm>

Hey, all. I'm all over MWI, but I gotta say that I think the Polycoms go a bit over the top. The blinking LED is enough for me; how do I disable the stuttered dialtone and the audible warble? I've looked through the config files, but there are a HELL of a lot of options, and I haven't been able to find those particular ones yet. Thanks! -Ken -- This message has been scanned for

I have always been confused about how MWI is working with asterisk. If a SIP device has the option to subscribe to MWI, should it? I think asterisk sends NOTIFY messages to SIP clients if the sip peer entry has "mailbox=". Is there any advantage then to leaving that out of the sip peer entry and having the device itself register for the messages? Is it really one and the same

Hi , How does the Asterisk provide Voicemail Message waiting indication to an h323 endpoint configured with Asterisk. Please provide the required Setup / comfiguration details or redirect to appropriate to resource. Awaiting an earliest positive response. Thanks in advance, Anisha

Remarque : message transf?r? en pi?ce jointe. ___________________________________________________________________________ Appel audio GRATUIT partout dans le monde avec le nouveau Yahoo! Messenger T?l?chargez cette version sur http://fr.messenger.yahoo.com -------------- next part -------------- An embedded message was scrubbed... From: harry gaillac <gaillacharry@yahoo.fr>

Hello, For a couple of hardphones which do not have Message Waiting Indicator, I'm wondering what could be the most efficient and reliable way to notify users a message is waiting. Though messages could be sent as email attachment, I'm thinking I should mimic cellphones behaviour like this: 5 min after a message if left, then call back mailbox owner and let him listen to its message, 30

I've upgraded to asterisk-1.6.0-beta2. I'm trying to get the new Telco MWI detection function working. It doesn't appear to be working. I have this in zapata.conf ; PSTN connected here ;immediate=no ;busydetect=yes ;busycount=8 ;musiconhold=default mwimonitor=yes ;mwilevel=512 mwimonitornotify=/usr/local/sbin/zapnotify.sh faxdetect=incoming signalling=fxs_ks context=incoming

I'm trying to get the Telco MWI recognition working in asterisk-1.6-beta7. I'm told that it's supposed to work provided my telco support FSK MWI signalling. I have Verzon FIOS. I believe I have FSK MWI signaling as I can hear the standard stutter tone when I pick up a live handset in front of my asterisk connection. I have the Verizon line attached to a TDM400 card, port 4. I

Hi guys, is there any way to execute a command *after* a caller has hung up the call? Something like exten => s,1,Voicemail exten => s,2,AGI(mwi.agi) I'd like to turn off the MWI on my cellphone (which is done by gammu[1]) Or does anyone know a way to check the state of the MWI from outside, i.e. with a cron-job? I'm turning on the MWI with the email-notify from voicemail, but

We've been testing (aim:frziegler and aim:end1r) the Voicemail2 app for a few days now, based on a CVS build from Monday, 5/12/03-23:15. Works good! Thanks Mark! We seem to have found a bug in the MWI (Message Waiting Indicator) logic. By simply creating msg0000.txt files in both structures, e.g.: for extension 4000: voicemail1: /var/spool/asterisk/vm/4000/INBOX/msg0000.txt

Using a TE410P with Zhone 24FXS channel banks to power standard analog phones I can't seem to find out if it's possible to support FSK or voltage type message waiting lamps. I don't want to use stutter dial tone because of the dramatic difference in per phone cost. TIA

Hi, I have VoiceMailMain on extention 1001 so it would be nice to get that sent to the phone instead of asterisk@[IP Address] when there is a message waiting.. Is it possible to change the extention that is sent to the phone when MWI is lit up?? Thanks.. -- ______________________________________________ http://www.linuxmail.org/ Now with e-mail forwarding for only US$5.95/yr Powered by