similar to: Training failed with hylafax

I'm wondering if hdlc can be the culprit (not sure what it is and what it does). Should I set hdlc to yes in misdn.conf (I'm asking before testing because this is a production system)? misdn.conf: [general] misdn_init=/etc/misdn-init.conf debug=0 ntdebugflags=0 ntdebugfile=/var/log/misdn-nt.log ntkeepcalls=no bridging=no stop_tone_after_first_digit=yes append_digits2exten=yes

Hi, I've tired to forward a Fax from Asterisk to Hylafax. It works so far until I tried with a Fax machine. I just got error shown in the log below. I'm not sure why. I've tested it with other 6 machines and they all work fine. Do you have any idea why? Pim Hylafax Session log: Apr 12 11:16:48.82: [ 5933]: SESSION BEGIN 000000078 492212601860 Apr 12 11:16:48.82: [ 5933]:

I'm able to recieve fax with pure SpanDSP 0.0.2 + Asterisk successfully but I have problems with some fax machine so I wanted to try using HylaFax to recieve Fax instead of SpanDSP hoping that it'll solve my problem. I'm trying to connect Asterisk with SpanDSP using iaxmodem. My system looks like this: ISDN <---> Asterisk <---> IAXModem <---> Hylafax Asterisk and

I have all three running on the same box. I say OT because it appears asterisk is doing it's job just fine. It must be an IAXmodem or faxgetty (hylafax) problem When faxes work, they look great. I have ten IAXmodems setup with different ports and they register fine. I have ten faxgettys that startup fine. I start the IAXmodems and then faxgettys in inittab. They are setup as a roll

Railsoids: FormTestHelper rules. It tests your response.body form at the same time as it triggers your action, with all the parameters in that form. This obviously improves quality. But it took issue with this: submit_form ''validate_stuff'' do |form| form[''IBhidden''] = ''validate'' end The field IBhidden is a hidden field. To be

Hi, My initial setup for receiving faxes worked as follows: fax call arrives on ISDN BRI connected to a BOSCH PBX, signal sent to ALCATEL PBX via PRI QSIG then finally sent to ASTERISK via PRI EUROISDN. The Asterisk server then forwarded the call to a iaxmodem and HylaFax received the data. All worked fine. Now I got rid of both BOSCH and ALCATEL in the "fax path" and it's as

http://perdre-du-poids-rapidement.com/wp-content/plugins/instantupgrade/google.html?orqm=ns.psml&sg=fth.ytf&oeo=magd">http://perdre-du-poids-rapidement.com/wp-content/plugins/instantupgrade/google.html?orqm=ns.psml&sg=fth.ytf&oeo=magd -------------- next part -------------- An HTML attachment was scrubbed... URL:

Hi, I'm trying to receive faxes using hylafax / iaxmodem but I just can't get it to work. We're using Sangoma E1 cards and have calls coming in over PSTN. I've tried turning hardware echo cancellation off but it makes no difference. This is what I get in /var/spool/hylafax/log: [root at faxhost log]# cat c000000003 Jan 14 12:44:43.39: [ 3403]: SESSION BEGIN 000000003 18005551212

Hi! from 2 days I'm trying to run hylafax server and iaxmodem with Asterisk 1.8.5. I have 2 computers in the lan, one is the Asterisk PBX and the other is the server with hylafax and iaxmodem installed. In Asterisk I set up an IAX trunk in this way: ___________________________ iax.conf [iaxmodem] type=friend context=outgoing-fax disallow=all allow=ulaw username=iaxmodem secret=password

Yes, post the complete smb.conf.. when what os your running. Then we can have a look better whats going on. Greetz, Louis > -----Oorspronkelijk bericht----- > Van: samba [mailto:samba-bounces at lists.samba.org] Namens mj via samba > Verzonden: dinsdag 4 april 2017 20:17 > Aan: samba at lists.samba.org > Onderwerp: Re: [Samba] Key table name malformed > > Hi all, >

Hai, Base on : >I have applied the changes as suggested. >After restarting the server, smbclient-command worked! But after I restarted the Samba Client with > ?/etc/init.d/samba restart? I was once again confronted with the same problem! >Again, only another server restart did the trick. Can you retry the restart samba with systemd and see if thats working better. Type :

After an: # ip ru flush I loose all my ip rules but the priority 0 one. root@sarasvati:~# ip ru 0: from all lookup 255 root@sarasvati:~# Ok with that, but now i''m not able to insert any new rule. This leads to a total loose of conectivity. root@sarasvati:~# ip ru add from all table default RTNETLINK answers: Numerical result out of range root@sarasvati:~# ip ru add from all

I think I'm very close to getting IAXModem and Hylafax going, but my current inbound hylafax logs show this: Feb 23 10:09:37.98: [ 3638]: MODEM <Empty line> Feb 23 10:09:37.98: [ 3638]: MODEM TIMEOUT: waiting for v.21 carrier Two questions - 1) Does anyone know what step I missed here? (I.e. please help!) 2) Is there a document I should be working off of? Google doesn't seem to

reflum, On Mon, 2014-12-08 at 16:54 +0000, Dean Sauer wrote: > On Mon, 01 Dec 2014 23:52:35 +0000, Philipp Schafft wrote: > > > Have you set top to display threads instead of processes? > > I rebooted, one process started, after a while... back to the insane > numbers of them, and even more threads.... > > below is: > > top -H (all threads) > 1509

Hello, Using the dataset below I produce a soil.texture plot (R code for this included at the end). One will notice I have plotted the points based on whether or not they are in a region called 'upstream' or 'downstream'. I'm curious if there is a way to somehow extract counts of the number of points (red points and blue points) falling within each classification (e.g. silty

I have applied the changes as suggested. After restarting the server, smbclient-command worked! But after I restarted the Samba Client with „/etc/init.d/samba restart“ I was once again confronted with the same problem! Again, only another server restart did the trick. Now I am facing this problem constantly. As soon as I restart, this command among others won’t work without displaying an error

Hello, I have used the following data to draw my barplot: BL LR Q 36.35 1.00 1.92 36.91 4.00 0.00 25.70 6.00 0.00 34.38 3.00 1.92 05.32 0.50 0.00 BL<-c(36.35, 36.91, 25.70, 34.38, 05.32) LR<-c(1.00, 4.00, 6.00, 3.00, 0.50) Q<-<(1.92, 0.00, 0.00, 1.92, 0.00) barplot(dt$LR, main='LR Value', col='orange', border='black',

Hello! I'm using Asterisk for our office telephony, but we have some problems that still we can't resolve about it. Here they are: 1) merge in/out call recording files I also tried to use a script I found on the internet, called 2wav2mp3 In extensions.conf I added the following lines ; script to be executed when monitoring has been finished MONITOR_EXEC=/usr/local/bin/2wav2mp3 exten

Hi, I am trying to plot the Case-Shiller index found at: http://www2.standardandpoors.com/spf/pdf/index/CSHomePrice_History_022445.xls The way I'm importing it into R is as follows: library(gdata) W <- read.xls("http://www2.standardandpoors.com/spf/pdf/index/CSHomePrice_History_022445.xls ", header=TRUE) attach(W) To give you and idea of what the data looks like: >

Dear all, I'm running Samba version 3.0.4 (this is what comes with Solaris 10) on a Solaris machine. For WORM file system support, a new "Snaplock"-mechanism has been implemented into SAM-FS. This mechanism uses the setting of the "setuid" bit (e. g.: "chmod 4000 <filename>") to trigger a file to become a WORM file (i. e. it cannot be modified / deleted