Displaying 20 results from an estimated 3000 matches similar to: "PRI Connected to definity errors"
2011 Jun 08
1
PRI hangup request, cause 18
We have 2 PRI from AT&T
And all is well but only few numbers having following issue. We are getting hangup cause 18 do you guys have any idea ? We have just migrate 1.2 to 1.8 and this issue raised
[Jun 7 17:57:10] VERBOSE[23717] sig_pri.c: -- Span 2: Channel 0/3 got hangup request, cause 18
[Jun 7 17:57:10] DEBUG[24856] sig_pri.c: Not yet hungup... Calling hangup once with icause,
2006 Nov 06
2
how to indicate an non-existent number?
Hello,
Using a PRI (E1) with the euroisdn protocol, I don't seem to get any
specific message from the telco when attempting to dial a non-existent
number. Asterisk returns a busy/congested code, but nothing indicating
the number's real status.
How do you guys manage that issue? Do you record a message ("sorry, the
number dialed can't be completed") and play it when the
2004 Jul 30
3
Connecting Asterisk and Avaya Definity By E1 . Incoming work, but not outgoing
Yes, I can make a call on that extension from other definity phone, if you
mean it.
-----Original Message-----
From: Ken Godee [mailto:ken@perfect-image.com]
Sent: 30 ÉÀÌÑ 2004 Ç. 19:14
To: asterisk-users@lists.digium.com
Subject: Re: [Asterisk-Users] Connecting Asterisk and Avaya Definity By E1.
Incoming work, but not outgoing
Roman Bessyadovskii wrote:
> Hi All.
>
> I connect
2009 Oct 25
2
Asterisk as the recording server for Avaya Definity
Has anyone tried to replace Witness or Nice recorder with asterisk. I saw a nice article on voip-info.org on how to replace voicemail server for Avaya Definity with asterisk.
The idea behind is to record not only the external channels but also extension to extension (three way calling for which the third leg is asterisk PRI will do)
Any suggestion will highly help
Sam
-------------- next part
2004 Aug 02
4
First Post: Any existing AVAYA Switch -> Asterisk Voicemail configs?
This is my first post, so please feel free to direct me to another list
if needed.
I am in the early stages of researching Asterisk. I administer a small
Avaya Definity G3 switch (~400 users).
Can anyone point my to resources/documents/actual implementation notes
of using Asterisk's voicemail with an Avaya Definity switch?
Many thanks,
Brian Hudson
--------------
2006 Nov 05
2
Definity Asterisk CallerID Issue
I am hoping someone could shed some light and point me in the right
direction? I'm attempting to get callerid work between an Avaya Definity
PBX and Asterisk via TE110P connected via T1/PRI Crossover PRI. From the
Definity side I've searched endlessly and came with an example which we
modeled as close as we can, but still no luck. While doing PRI intense
debug span 1 in I see a couple
2004 Aug 05
3
Avaya/Lucent Definity -> Asterisk interop question
Calling all Definity admins,
Got a few questions about Definity -> Asterisk interoperability.
1) What are the options for integration? Can I hand off extensions from the
Definity and vice versa?
2) Anybody have any working configs they would like to post?
I've found and read the legacy integration on the wiki about the two
systems. I've also googled and found a few threads that were
2011 Feb 21
1
T1 PRI shows yellow/red alarm
We are running Asterisk version 1.4.23-1, libpri-1.4.9 and
zaptel-1.4.12.1 and two Digium TE220Ps. Debugs are set to 10.
We have a T1 PRI connected to the telco. Over the last 4-5 days, we
have getting Yellow/Red alarms coming from the T1 PRI. The other two
ports in use are connected to internal test switches (Avaya
Legend/Avaya Definity), and are not showing any errors.
2007 Dec 28
1
Definity G3R and MWI
Hey everybody,
I've just spent the last two hours Googling and searching the Wiki. I'm
trying to find if there are any listings of codes for the Avaya Definity
G3R, to allow for an Asterisk system to turn on/off a phones MWI that is
attached to a G3. We are looking to use an Asterisk system as a voice
mail server.
I'm not having any luck, anybody have such information?
Thanks,
2004 Jan 19
2
Lucent and ISDN-PRI
Hi Everyone,
So I have been further exploring the integration of our asterisk server and
our lucent definity g3si system. I took the suggestion of setting up an
isdn-pri line added the two way tie trunk and the signalling group, but
can't seem to get the PRI signalling working on the asterisk correctly. I've
set pri type to network on the lucent, and pri_cpe in zapata on the
asterisk, but
2004 Apr 02
4
avaya and linux
Does anyone know if avaya voip product is running linux under the hood?
Thanks,
/glen
--
Glen Ford
gford@idiom.com
2004 Jan 16
1
Asterisk Integration with Lucent Definity g3 si
We have had quite a bit of success with our T100P and TE410P cards
interfacing to Nortel Meridian PBXes and also to a Livingston Portmaster 3
using ESF/B8ZS and various combinations of E&M wink and ISDN PRI (usually in
5ESS mode).
In the near future, I may also need to interface to a Definity via a T1. I
was planning to use PRI--is that an option for you on your switch?
-----Original
2005 May 06
2
Transparently Routing German pri through Asterisk
Hi,
at the moment we have in Avaya Integral PBX with german pri (30 lines).
We want to smouthly migrate to an Asterisk server.
For this reason: Is it possible to route the external german pri (E1)
through Asterisk server to that Avaya PBX?
I think at first we need a Digium e1 card 4-Port. But how do we have to
configure the routing of the whole PRI?
I really would appreciate any sample
2005 Jan 12
2
T1 Timing Slips
Does anyone know how to monitor * to see if they are receiving timing slips
on a span connected to a T100P card? I am seeing b-channel restarts quite
often and also getting "No D-channels available" warnings from time to time.
Yesterday I had all the b-channels crash during a MeetMe Conference. Not
good! This PRI is connected to an Avaya Definity PBX that is onsite and
located in the
2009 Jan 30
2
Asterisk with Avaya
Hi !
I am trying to connect Asterisk with Avaya Definity.
I use this tutorial to do this http://cyril-constantin.blogspot.com/2008/04/howto-connect-avaya-to-asterisk.html
The comunication between avaya and asterisk is fine but without sound. I can call from Asterisk to Avaya and extension ring or Avaya to Asterisk and extension ring too but I cant hear anything
Example
Asterisk ---> Avaya
--
2006 Dec 29
2
Avaya to Asterisk via H323
I am tasked with linking an Avaya Definity switch to an asterisk box using
it's IP card that handles H.323. All my googles turn up a lot of results but
nothing recent. I am able to find instructions but they are dated from 2005,
and often fail halfway through.
What is the best way to achieve what I want, which is two way calling
between the Avaya switch and Asterisk server using h.323, and
2004 Dec 18
3
3rd party call control / CSTA , JTAPI or TAPI interfaces
(REPOST, sorry if you get this more than once.)
Hello all,
(Not sure if this is more appropriate for user or dev list)
Does asterisk have any sort of "standards based" api that can enable
an application to do call control on the switch ?
For example, if I am developing a call center application
using asterisk, I would like to be notified of inbound calls
and then be able to route
2005 Mar 22
4
TE405P and echo
I am using a SIP softphone (X-lite, SIPPS or Firefly) connected to an
Asterisk v 1.0.3 PBX. The PBX is also connected via a ISDN-PRI crossover
cable to a Avaya Definity Generic 3 PBX via a TE405P card. All outside of
the office calls go through the Definity. Here's the issue:
Calls to internal SIP extensions, Definity extensions, other offices within
our private network (through the
2005 Jan 18
2
Router Recommendations Please
Hello all,
We've discovered that VoIP (IAX2) + Citrix + Video is pegging the measly
CPU on the Netopia router our ISP provided. We've got 3Mb/3Mb and will
increase to 4/4 next year.
The Netopia simply breaks out our WAN IPs, and we've got a switch hooked up
to it on the inside (Actually I've got a QoS box in-between).
-------------
| Internet |
| on Cat5 |
-------------
2007 Apr 20
3
Passive E1 Pri Tap for Voice Recording
Dear All,
Is it possible to install * in front of a Avaya IP 406 system via a T
connector E1 tap so it's external to the Avaya system?
We would like to record upto 60 channels (2 * ISDN30e). This may increase
later.
Also, could the calls go into the cdr for retrieval/browsing later?
What hardware/server would you recommend?
Thanks.