similar to: caller id problem

G'afternoon everybody, I'm having a problem with consistently being able to ring our extensions from an outside line. I don't have a problem reaching the number, but during our calls to Background(msg) that I am having a problem. It seems to be an issue with timing. If I press the extension towards the end of the Background(msg) the it often works. However, in the middle of the

Hi, We've got IAX softphones, GrandStream VOIP phones and zaptel connected analog phones. Caller id, internally, works just fine (as long as I use numeric only callerids) for IAX and grandstream. Is there a way to have the analog phones' LCD display show the caller id? These are plain old regular analog phone, that if I had callerid from my telco would show on the screen. thanks

Hi, I would like to know if one can set the outgoing caller ID within Asterisk when calls are going out through: 1) an analog POTS line (I suppose not) 2) a telco BRI line (I don't think so) 3) a telco PRI line (maybe) 4) a voip provider (surely) Thanks, Vieri ____________________________________________________________________________________ Moody friends. Drama queens. Your

hi, on our incoming E1-PRI from german telco Arcor the leading 0 for the (area access code in europe) and the 00 (country accescode in europe) are missing on incoming callerids. only prepending a single 0 is not the solution as suggested by some writers on this list, because there is no way to differ between national and international callerids and it's not possible to make the decission

We have extended collectd virt plugin to extract info about disk usage from a libvirt domain using libguestfs. In addition to my previous mail I am attaching some more infomration about the problem. Currently the collectd plugin works fine and retrieves the required statistics. The problem that I face happens after certain number of cycles (getting disk usage statistics). Collectd is terminated

Ok I have a queue that is working perfectly. The problem is when one of the agents is outside the building on an external phone line (say a cell phone). My telco hangs up on the call . I think the telco is hanging up on these calls because there is no CID attached. (I know my telco wont connect calls without ANI, so that is what it is my assumption) So first I need to prove my assumption

Hi Folks, having an issue with outbound calls through a VOIP provider. Calls get sent out with the CallerID(number), but where does callerID(name) come from? Apparently not from provider, as we are seeing different (sometime missing) names on inbound calls, different than what we have configured. Apparently this comes from some telco database somewhere? Numbers were ported from a wired-telco.

Hallo! Finally we have E1 PRI connected to our Asterisk box. Now I have one question. My internal extensions (_XXX) are SIP phones connected to Asterisk. Our telco routes some public numbers (_71602XX and others) to our Asterisk via E1. Some internal extensions can be reached from outside using public numbers (e.g. 7160234 -> 200), and some others cannot. Everyone can call outside

I currently have Asterisk deployed in my office with a TE411P. On the first port of this card is a T1 from the telco setup for D4 AMI. Unfortunately, I'm not receiving caller ID on inbound calls from this line. The caller ID information is arriving in the form *ANI*DNIS*. In zapata.conf, I have signalling set to em_w. The DNIS always arrives correctly, but I'm never receiving the ANI

I am trying to receive both CID and DNIS from the telco through a non-pri T1. Currently I have the T1 setup and operational both outbound and inbound calls are completed as should be expected. The calls came in and were placed in the context specified in zapata.conf on exten => s,1. I have requested that the telco provide callerid (they call it ANI) along with 10 digit dnis for my 800

Dear All, I am trying to setup an ISDN line from local telco on a digium card. The problem I am facing is that I am not getting any caller id from the telco. They say that they have enabled caller id. Please help me out. My zapata.conf -------------------------------------------------------------------------------------------------------------------- [trunkgroups] [channels]

We have just had an ISDN PRI service commissioned here in AU (using Powertel as provider). I have called them and ensured that we have the ability to set Caller ID on our service to any number in our 100 number block, and I have been assured that everything is OK from their end (unlikely). Every time I drop a sample.call in to /var/spool/asterisk/outgoing with the Callerid: option set, the

We do not get caller ID (name) on our telco lines. However we have a few single line extensions with consumer type handsets that ring at odd hours with "Asterisk" before the phone is picked up, and "Out of Area" after it is picked up. I have read that "Asterisk" is what is reported by Asterisk for 0 length caller ID number. But since we don't

I asked my telco to release caller name on the PRI. Earlier they were releasing only the phone number. I still did not see the name, but only the number in caller id. Actually I now see number twice. When I inquired with them this is the response I got: "I ran a trace on your TG. I see that your switch is picking up the call so fast that it is not able to pick up the name. The

On Wednesday, 26 February 2020 10:43:27 CET Richard W.M. Jones wrote: > On Wed, Feb 26, 2020 at 11:21:18AM +0200, Veselin Kozhuharski wrote: > > Hallo Rich, > > > > Here is the fd list and total number just before collectd application > > crashes. Before that the number of used fd's is constantly increasing. It > > looks like a fd leak inside libguestfs to me.

Hi, Odd problem have just noticed in that when I call into the PBX DAHDI detects the call and hands it off to the extension, if I then hang up it still continues to process through the dialplan. This is what I have in chan_dahdi.conf: [channels] language=en echocancel=yes usecallerid=yes cidsignalling=v23 sendcalleridafter = 2 hanguponpolarityswitch=yes rxgain=2.0 txgain=3.0 progzone=uk

OK here it goes.. Caller ID is two parts or actually three: Part 1 Number only Part 2 Number + Name Part 3 Whole lotta stuff (also known as ADSI) Here is the US, I cannot speak for other countries. When party A places a call to Party B. Party A's Telco picks up the number, either from a table on the switch or passed from the PRI from Party A. Then on the far side (Party B's Telco)

hi, when i call asterisk (on x100p) i got this : CLI> -- Starting simple switch on 'Zap/7-1' Jul 13 15:03:34 ERROR[311316]: callerid.c:192 callerid_feed: fsk_serie made mylen < 0 (-9) Jul 13 15:03:34 WARNING[311316]: chan_zap.c:4735 ss_thread: CallerID feed failed: Success Jul 13 15:03:34 WARNING[311316]: chan_zap.c:4777 ss_thread: CallerID returned with error on channel

I'm having trouble setting the outbound caller ID on calls I make from my PRI trunk group. The PRIs are served out of a 5ESS. Telco has set the PRIs up for user provided caller id information, so I believe I just don't have it set up right in my dialplan or something. I can't seem to find an example of setting the outbound caller ID specifically for a 5ESS. Does anyone have an

Hi All, Just a quick question, but I could really use some help on this one. I've got the CVS-Head of * installed and running, and am using a VoiceTronix OpenSwitch12 to connect to 12 analouge lines. I've got callerid activated by the Telco, and can get callerid using a std phone. However, using *, I always get an error 'Cannot decode callerid'. Does anyone know if I need to