similar to: original & reformat extension

Hello, I would like to verify if a specific SIP header exists, and if yes, extract the partial content from another header. 1. Is there a way to verify if a specific header exists? 2. How do I extract data that is between the first : and the following @? Specifically, The data looks like <sip:1234567890 at 10.0.0.1:5060> and I would like to get only the 1234567890 I tried to use the CUT()

Hi, I have * set up as a PSTN->VoIP gateway (with an E1 with multiple numbers pointing to it). I'd really like to be able to dial out to a SIP server like so: exten => _X.,1,Dial(SIP/${DNID}@hostname) I.e. the remote SIP server receives a SIP INVITE with a "To:" header containing the dialed number (e.g. 02085555555@computer.company.com). This is equivalent to having a

Hi all, In order to use the "open url" function of zoiper (it opens an url based on the asterisk $callerid(dnid)), I need rewriting of the dnid. In my dialplan I have: exten => 1000,3,Set(CALLERID(dnid)=newdnid) exten => 1000,4,Noop(${CALLERID(dnid)}) exten => 1000,5,Queue(test-queue) but the callerid(dnid) shows the extension called (the member of the test-queue) and not

Hi. I've discovered a bug in the Dial() string processing (for Asterisk 13.14.1 at least). According to the documentation in channels/chan_sip.c the Dial() string syntax is: * SIP/devicename * or SIP/username at domain (SIP uri) * or SIP/username[:password[:md5secret[:authname[:transport]]]]@host[:port] * or SIP/devicename/extension * or SIP/devicename/extension/IPorHost * or

Hi, I'm using videocalling on asterisk 1.4.10. When I setup the videocall with exten = n,1,h324m_gw(s at video2webanswer), I loose the variable DNID (${CALLERID(dnid)}) Before the videocall is set up, this variable is filled and after this videocall this variable is empty. Also all local variables are empty. If al look at the A-number (${CALLERID(num)} this variable is not empty

Hi, We encounter a problem with the variable CALLERID(dnid) We use E1 lines where we can make an inbound call or an outbound call on the same channel (not at the same time) If the CALLERID(dnid) is not used, than the CALLERID(dnid) will be the CALLERID(dnid) of the previous call For example: - First we get a inbound call on channel DAHDI/11-1 with CALLERID(dnid) = '655871460' We read

Hi i have an asterisk pbx with E1 port connected to another PBX. Im trying to send the DNID/DNIS to the PBX here's my dialplan exten => 8881111111,1,Dial(ZAP/g2) exten => 8881111111,n,Hangup() The PBX just get the number 2 as it's DNIS when i change it to ZAP/1 or ZAP/g1 the PBX get the number 1. What should i add to send the extension number as DNID/DNIS? Thanks! --------------

Dear Asterisk-Users: Question: ======== How do I get asterisk to pass DNID/RDNIS information between asterisk machines using iax2, in a Dial(IAX2...) command ? Setup: ===== I have two asterisk boxes, MASTER and SLAVE. MASTER is running 1.2.0 and SLAVE is running 1.2.1. The main box handles incoming calls on a multiple lines (both via hardware connection to our internal PBX and calls

Hi, Yet another question, now that I have callerid working correctly, I'm trying to work out how to utilise the different numbers I have. I have a 100 number range allocated to my E1/PRI/OnRamp service. My incoming calls are handled like this: Advertised/published number is an analogue line terminating on a X101P. If the analog line is busy, it has a call diversion to the PRI on a TE405P

Hi all! I'm in the process of configuring an Asterisk server here that, based on which number was called, should send calls to different extensions: 913 - 11111 -> ext. 1 913 - 22222 -> ext. 2 913-11111 & 913-22222 being 2 (of the) numbers we have coming in to our system via our VoIP hosting provider. The config used here is based on Asterisk at home, so it includes also the

I am trying to set add a SIP Header to a call before adding it to the Queue. The dial plan sends the call to my macro to perform the work. When I use chan_sip, everything works as expected. When I use PSJIP support, it's not adding the SIP header. Looking at the output, I see the macro is called in both cases. In the PJSIP case, the added sip header never is showing up in the asterisk logs

Hi Guys I have just installed a call center onto Suse 10. I have managed to do a DBget (astdb) and extract the DNID numbers to play a DNID specific greeting. We have installed Snom 320 and the customer would like us to Send the DNID(nam) to the phone screens so that the agent will be able to answer in the correct language and with the specific customer company name (ie. Agent says

Hi everybody. We have a problem with the configuration of the card, the cards work and we receive incoming calls but asterisk don't receive dnid. We have 5 servers with 1 E400P with the same problem and the telco told us that we need to configure the card to request it, how we can do this? Can you help me to solve the problem. Best regards, Carlos Fernández Puente carlos.fernandez@alisys.net

Hi, Does anyone know anything about the following? In a hosted environment where several area DIDs are provisioned on a single server, how do most carriers establish the origination DID, number. Asterisk allows us to modify the CallerID, name, number and DNID channel variables before dialling out via SIP. Most carriers will allow us to spoof a callerID when placing a call, and pass it forward.

Dear All, Here the version 2.2 a new version of your dear CallingCard Software !!! http://www.areski.net/areskicc-doc-v2/ Many new features have been added and several enhancements made! Newest features : - A new re-build rate-engine - LCR & LCD management (OOOOHHH YESSSSS) - Billing Increment - Progressive Rate - Scheduled Rates (days of the weeks) - Expiration rates - Buy rates

Hi, Can someone help me formulate MySQL Query(s) which will help me extract the following details for a given DID (date range can be excluded for simplicity). Date-Time DNID (I am recording this is `userfield`) CLID time-1 (when call was received) time-2 (when call was answered by agent) time-3 (when call was hung-up) My Call flow is as follows: - Caller dials a DNID - Call enters queue - Call

I've been looking through the examples and docs, but haven't yet quite figured out how to do what I want. We've got a T1 coming in carrying a block of telephone numbers, terminating on an Asterisk box. Any call that comes in needs to get sent to a SIP proxy, with a particular extension format: *ANI*DNIS*@sipproxy.address The closest I can see to do this with the Dial() command is:

Hello, We have 4 'Onramp-2' Telstra ISDN BRI services operating on Asterisk Server with Eicon 4BRI card. For most part the service is okay. However, we are are having problems with passing callerID to internal extensions. This is the set of command executed. exten => <pattern>,1,Answer ; Answer the line exten => <pattern>,2,NoOp(${DNIS}) ; debug statements exten =>

Hello everyone. I'm using Asterisk 1.4.31 and A2Billing 1.7.0 to manage a small wholesale operation, so I configured A2Billing for not to answer the call nor play any greetings or balance notifications to the caller. I'm authenticating each customer by it's IP address, and each customer has it's own context, in which I set the following: ;=====in extensions.conf======

When I have HylaFAX answer a call redirected to the fax extension in Asterisk when it detects CNG, Asterisk hangs up: Jan 30 14:32:59 VERBOSE[1098]: -- IAX2/ttyIAX0552/12 is ringing Jan 30 14:32:59 VERBOSE[1098]: -- IAX2/ttyIAX0552/12 answered Zap/23-1 Jan 30 14:32:59 DEBUG[1098]: Ooh, voice format changed to 8 Jan 30 14:33:01 VERBOSE[1098]: -- Channel 0/23, span 1 got hangup Jan 30