similar to: Transfer Issue with IAX Trunk

I am in the process of implementing a new ISDN pri and have a couple of questions. This is a full 24 channels (23 B and 1 D) delivered over a T1 interface. The interface looks good and is not showing any errors. Any help that you can provide would be greatly appreciated. 1) What switchtype should be configured in the zapata.conf file when AT&T is using CUSTOM? My understanding is that

Is there a way to allow a user to dial an extension after listening to your voicemail instead of leaving a message? Example would be the big boss is on vacation and changes his out message to say "you can reach my assistant at by dialing 1234 now or leave me a message". Thanks in advance. -------------- next part -------------- An HTML attachment was scrubbed... URL:

When I execute a pickup on a ringing phone I get CALL FAILED REASON CODE 603. I am dialing **212 with the following config. Anyone have a suggestion? EXTENSIONS.CONF -snip- [BLF_Group_Pickup] ; Defines how the extension to pick up a ringing phone in your BLF group exten => _**XXX,1,Pickup(${EXTEN:2}) exten => _**XXX,n,Hangup() [BLF] ; Defines a BLF Hint for phones exten =>

We currently have an Asterisk system that is hooked up to our old paging speakers via sound card, plugged into two amps. Each amp drives up to 8 analog speakers in each warehouse (we have 2). Both warehouses are around 30k square feet. Both have a large number of printing presses. The computer system is that is running Asterisk is around 10 years old and starting to fail. I'm looking to

Has anyone had any experience using a modem through the Asterisk system? I have some technical support personnel that need to use a computer modem to connect to a remote system for troubleshooting. Is there a SIP compliant gateway that will support a modem connection at decent speeds (minimum of 28.8) that anyone knows of? If not, has anyone used a Digium FXS card for this? Thanks

I am having an issue with the CallerID Number not being passed to my phone in the SIP packet. The CallerID Name is passed just fine and displayed on the phone with no issue. I have done a NoOp() in my extension.conf and successfully seen both the CallerID name and number correctly. So that leads me to believe that Asterisk is handeling it correctly. However, when I do a packet capture of the

    Not these particular two servers. On 02/03/20 12:16, Doug Lytle wrote: >>>> I am trying to troubleshoot two Asterisk servers that have an IAX2 >>>> trunk between them. > Carlos, > > Had caller-id ever worked between these two systems? > > Doug > -- Telecomunicaciones Abiertas de México S.A. de C.V. Carlos Chávez +52 (55)8116-9161

Hi! I am searching for the description of the available dialstrin options for the DAHDI channel (and also other channel types). I am not looking for outdated voip-info links, but for the authoritative source, e.g. something like "core show application Dial" Does such thing exists? thanks Klaus

    I am trying to troubleshoot two Asterisk servers that have an IAX2 trunk between them.  Calls come and go but there is no CallerID from the remote server either way.  One of the servers is running Asterisk 16 and the other is an older 1.8 install (I know, I am trying to get permission to update).  The trunk between servers is very simple.  Something like: Server 1 (Mexico) [panama]

Has anybody has issues with the new Native MOH and IAX trunking when placing a call on hold? My scenario, Call is placed on a Definity G3 via PRI to Asterisk. Gets trunked over to another Asterisk system via IAX2. Call is answered by operator and placed on hold. At that point, audio is very broken and feedback pulsing is heard. Bad enough that the caller hangs up. If the call is

We've moved within the last two months to Asterisk 1.4.x All remote facilities are connected via highspeed (9mbit) connections (Over OpenVPN) to a central Asterisk box, acting as a voice router, that funnels all calls into our Avaya Definity G3R via PRI. When corporate employees visit the remote facilities and try to call the G3R's voice mail system(Audix), DTMF is not recognized unless

Hello everybody, I am trying to find an intermittent SIP error with one provider and thought the best first step would be to have "sip set debug on" for some days and check the logs. Everything gets logged nicely, but the SIP log clutters up the console quite badly. Is it possible to have SIP debug log go only to the log file and not to the console? My logger.conf: console =>

Does anyone know how to configure a SIP phone to pass the mailbox number to the voicemail service when dialing? I would like to press the message waiting lamp and be prompted for my password instead of "mailbox number". Can this be passed in the set-up call or based on caller-id? Thanks -------------- next part -------------- An HTML attachment was scrubbed... URL:

I am perplexed by this so I how someone can help me out. On one of my servers the users began complaining that if they picked up a parked call they could not use the # key to transfer the call. This is a particualarly annoying issue since everyone has been taught to use #700 to park calls. At first I thought it was a DTMF issue with the polycom phones, since rebooting seemed to fix the problem.

Can you say a Virtualized Asterisk with a PRI card! http://www.phoronix.com/scan.php?page=news_item&px=OTY0OQ Doug -- Ben Franklin quote: "Those who would give up Essential Liberty to purchase a little Temporary Safety, deserve neither Liberty nor Safety."

Is there a way to limit outbound calls when feeding files to the outgoing directory in asterisk? I several thousand files i need to feed asterisk, hoping to copy it to the outgoing directory all at 1 time.

Hello all, I'm planning to create a simple Auto-Attendant (IVR Menu) for my home PBX yet all callers from incoming (trunk) calls must only press the extension numbers from the [analog-ext] else will play the "pbx-invalid". How do you do that using the GotoIf() (or probably using the other applications) but will check if the numbers entered belongs to a specific context? Also, how

Is there any known reason that the DISA() routine should behave differently than WaitExten() as far as recognizing DTMF tones? If not, I suspect there's a bug here. Try it yourself--two DID's on our PRI, numbers below let you test each routine: It is my observation that some setups/phones DO and some DO NOT express this variance. --I could not show any variance on a sprint mobile phone

Hello, I have a 3 server asterisk configuration where one asterisk (say A) (v 1.4.25) has a digium card connected to E1 from which calls are routed to another asterisk server (B) (1.6.0.9) over IAX trunk from which calls get routed to third server (C) (1.6.0.9) again via IAX trunk. SIP clients are connected to third server. A is the PSTN termination server, B runs the menu and AGI and C is where

I've moved 1 of our facilities over from 1.2 to 1.4 two weeks back. So far, the only issue that I've encounted is. I have a scheduled CRON job that runs at 3am every Sunday, that issues a: asterisk -rx 'restart when convenient' The first Sunday that it ran, Asterisk never restarted. The CRON logs show that it issued the command successfully. This Sunday, it ran but never