similar to: No subject

Hi Steve; Currently with Dahdi, for the below configuration that we were using it in the rc.local, how it will be? I think there should be something new to be used instead of ztcfg, what it is? And what about other lines? They need to be changed? touch /var/lock/subsys/local /sbin/modprobe wctdm /sbin/ztcfg -vv /usr/sbin/fxotune -s /usr/sbin/safe_asterisk Regards Bilal --- On Thu, 5/1/08,

Hi Steve; Currently with Dahdi, for the below configuration that we were using it in the rc.local, how it will be? I think there should be something new to be used instead of ztcfg, what it is? And what about other lines? They need to be changed? touch /var/lock/subsys/local /sbin/modprobe wctdm /sbin/ztcfg -vv /usr/sbin/fxotune -s /usr/sbin/safe_asterisk Regards Bilal --- On Thu, 5/1/08,

device somewhere in your communication path, and since voice is picked up as DTMF, some device is also set to listen for inband DTMF. What is the origination source of incoming calls to your system? Zeeshan A Zakaria -- www.ilovetovoip.com On 2010-07-08 4:24 PM, "das sandesh" <sandesh440 at gmail.com> wrote: Hi, We have few systems with asterisk 1.4.22.1 and we use sip

Dears; To patch libpri: I just place the patch file in the libpri source directory and then I run make and make install? Or I need to compile the dahdi and asterisk also? If the problem stayed, do I have to go for previous libpri version? Or for previous dahdi version and asterisk version? Regards Bilal ----------- > bilal ghayyad wrote: > > But I am afraid it is a bug because I

sorry for typo mistake in my last post. as from my orignal post two registration of the same user are as follows SIP/XYZ at 119.68.0.90:5060 SIP/XYZ at 202.16.34.10:5678 so dial command with unique-id i want to use will be Dial(SIP/XYZ at 192.168.0.20:5062-096afee8,30,rtT) Dial(SIP/XYZ at 192.168.0.12:64290-0966ab80,30,rtT) and not Dial(SIP/192.168.0.20:5062-096afee8,30,rtT)

Hello list, What servers would you suggest for:100 concurrent SIP calls, 4xT1 card, and a not much busy website, i.e. getting 500-1000 hits a day. Thanks, Zeeshan A Zakaria -- www.ilovetovoip.com -------------- next part -------------- An HTML attachment was scrubbed... URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20101020/8ab7ae3e/attachment.htm

Dear; Thanks a lot for guiding me. Is it possible that the installation libpri-1.4.11.5 newer than the libpri-1.4.11.5-patch? Well, when I typed (note: I am trying to apply the libpri-1.4.11.5-patch for the libpri-1.4.11.5): libpri-1.4.11.5# patch -p0 -i libpri-1.4.11.5-patch It gave me that patched detected as shown below (example of one file, and I got same for other files): patching file

Hi, Does anybody have experience working with Aculab groomer II, to convert between ISDN E1 and non-ISDN T1, or anything similar. I am looking for sample config files. We have asterisk as ISDN E1, but for testing we set it up as regular T1 if we get sample config files. Zeeshan A Zakaria -- www.ilovetovoip.com -------------- next part -------------- An HTML attachment was scrubbed... URL:

Hello list, I need to know how to deal with a redundant network with only one asterisk server, which is receiving registrations from the end points on both of its ethernet ports. This means extension 201 is registering both from eth0 and from eth1. Is there a way/software which can act as a middle man between asterisk and the ethernet ports, and by default sends registrations to asterisk only

Hello list, I have been using Cepstral's 8KHz voices for my text-to-speech service for some time now, and have been noticing that the voice quality is really poor, doesn't matter what phrase I give it to convert. None of the other 8KHz voices I have ever used were this bad. It doesn't seem good enough system to be used in a commercial system. Is there any better quality text-to-voice

We are testing the innomedia ATA's to possibly replace our current line up of ATA's that we are using. Has anyone used their product? What is their track record on stability, voice quality, DTMF talkoff, T.38 Thanks Bryant ---------------------------------------- From: "Zeeshan Zakaria" <zishanov at gmail.com> Sent: Wednesday, October 13, 2010 10:41 AM To:

Hi list, For a telecom project I need to setup a SCADA solution. I don't have any previous experience in this type of monitoring and automization. I'll be using SNMP data from asterisk servers and endpoints. If anybody has any suggestion which SCADA software can fit in such a VoIP solution, your guidance will be highly appreciated. Thanks, Zeeshan A Zakaria -- www.ilovetovoip.com

Hi list, For a client I am setting up a system which will use T1 PRI from Primus, who offer only NI-1 and NI-2 protocols for D-Channels. Previousely I have only used switchtypes euroISDN and National. Although the documentation says Asterisk does support NI-1 ans NI-2, but wanted to get your opinion if you have used these protocols on an Asterisk box and if there were any things to consider. If

getting calls, but I can only send calls from my main machine IP address so I can't control where I am sending calls to. I am hoping to have this developped somehow (a per SIP peer bindaddr and bindport), even if it means some bounty. I can't imagine this being this difficult, so a few of us who need this putting a couple hundred dollar would probably do it. Mike > -----Original

Hi list, I am planning a migration to virtual machines, and was considering with it to move from 1.4 to one of the later versions. My and my clients' 1.4 setups have been rock solid and I don't want to put myself into any unnecessary trouble. Those of you with solid experience with all these versions, what would you suggest? What new and exciting enhancements would newer versions bring

Greetings, Sounds like a simple thing to do, but I was not able to do it on these particular phones. Snom wiki was not helpful. My client wants to keep his phones pointed to UTC time, no DST, no change in timezone, i.e. to stay at 0 hours difference. The phones are provisioned from a tftp server. If I remove 'dst' value from the provisioning file, on bootup phones force users to pickup

Hello list, (Resending this email due to a typo in previous copy) I need to do E1 to T1 conversion for a project, and was wondering if there exists a card with both E1 and T1 on it. Or is it possible to use two separate cards in an asterisk box, one for E1 and one for T1? (Please don't mention aculab or adtran, dealt with them in the past, won't deal again.) I talked to Digium and the

My main asterisk server is under unusual heavy attack, and so far Fail2Ban has blocked about 30 IPs, from various different countries. At this time it is blocking about 1 IP address every few minutes. Just wondering if anybody else is also experiencing unusually increased hack attempts today? Zeeshan A Zakaria -- www.ilovetovoip.com www.pbxforall.com (beta) -------------- next part

Hello list, Slightly off the list topic, but I hope I'll get some help here. Somebody wants me to implement for his project a Cisco based VoIP system. I told him that I specialize in Asterisk based systems, but he is not even aware of Asterisk. The requirement of project is such that chances are slim that this firm will consider Asterisk based system. So I told him that though not experienced

Hi Danny; Really I did not understand how I can determine if the IO will be DB or conf files? Is it from the Asterisk manager? Regards Bilal ------------------------- It depends on how you are configured. The gui interfaces using Asterisk Manager, so you get the Same IO from the gui that you would get from a native manager session. -----Original Message----- From: asterisk-users-bounces at