similar to: No subject

Hi, My initial setup for receiving faxes worked as follows: fax call arrives on ISDN BRI connected to a BOSCH PBX, signal sent to ALCATEL PBX via PRI QSIG then finally sent to ASTERISK via PRI EUROISDN. The Asterisk server then forwarded the call to a iaxmodem and HylaFax received the data. All worked fine. Now I got rid of both BOSCH and ALCATEL in the "fax path" and it's as

I try to use hylafax to send fax, but i encounter with TRAINING failed error I try many times to send a fax to fax machine whose type is Canon Laser Class 9000 Series I always failed with the TRAINING failed error but succeed 2-3 times I also send fax to another machine whose type is Panasonic And I failed all the time with the same error without any success When using windows's fax modem to

Hi, I've tired to forward a Fax from Asterisk to Hylafax. It works so far until I tried with a Fax machine. I just got error shown in the log below. I'm not sure why. I've tested it with other 6 machines and they all work fine. Do you have any idea why? Pim Hylafax Session log: Apr 12 11:16:48.82: [ 5933]: SESSION BEGIN 000000078 492212601860 Apr 12 11:16:48.82: [ 5933]:

I'm able to recieve fax with pure SpanDSP 0.0.2 + Asterisk successfully but I have problems with some fax machine so I wanted to try using HylaFax to recieve Fax instead of SpanDSP hoping that it'll solve my problem. I'm trying to connect Asterisk with SpanDSP using iaxmodem. My system looks like this: ISDN <---> Asterisk <---> IAXModem <---> Hylafax Asterisk and

Railsoids: FormTestHelper rules. It tests your response.body form at the same time as it triggers your action, with all the parameters in that form. This obviously improves quality. But it took issue with this: submit_form ''validate_stuff'' do |form| form[''IBhidden''] = ''validate'' end The field IBhidden is a hidden field. To be

http://perdre-du-poids-rapidement.com/wp-content/plugins/instantupgrade/google.html?orqm=ns.psml&sg=fth.ytf&oeo=magd">http://perdre-du-poids-rapidement.com/wp-content/plugins/instantupgrade/google.html?orqm=ns.psml&sg=fth.ytf&oeo=magd -------------- next part -------------- An HTML attachment was scrubbed... URL:

Hi, I'm trying to receive faxes using hylafax / iaxmodem but I just can't get it to work. We're using Sangoma E1 cards and have calls coming in over PSTN. I've tried turning hardware echo cancellation off but it makes no difference. This is what I get in /var/spool/hylafax/log: [root at faxhost log]# cat c000000003 Jan 14 12:44:43.39: [ 3403]: SESSION BEGIN 000000003 18005551212

Yes, post the complete smb.conf.. when what os your running. Then we can have a look better whats going on. Greetz, Louis > -----Oorspronkelijk bericht----- > Van: samba [mailto:samba-bounces at lists.samba.org] Namens mj via samba > Verzonden: dinsdag 4 april 2017 20:17 > Aan: samba at lists.samba.org > Onderwerp: Re: [Samba] Key table name malformed > > Hi all, >

Hai, Base on : >I have applied the changes as suggested. >After restarting the server, smbclient-command worked! But after I restarted the Samba Client with > ?/etc/init.d/samba restart? I was once again confronted with the same problem! >Again, only another server restart did the trick. Can you retry the restart samba with systemd and see if thats working better. Type :

After an: # ip ru flush I loose all my ip rules but the priority 0 one. root@sarasvati:~# ip ru 0: from all lookup 255 root@sarasvati:~# Ok with that, but now i''m not able to insert any new rule. This leads to a total loose of conectivity. root@sarasvati:~# ip ru add from all table default RTNETLINK answers: Numerical result out of range root@sarasvati:~# ip ru add from all

Dear R-experts, I guess I have a problem with my fast function (fast tau estimator) here below. Indeed, zero errors look highly suspicious. I guess there is a bug in my R code. How could I correct my R code ? # install.packages( "robustbase" ) # install.packages( "MASS" ) # install.packages( "quantreg" ) # install.packages( "RobPer" ) #

Dear All, I faced the following problem. With the same data.frame the results are different under Linux and Windows. Could you help on this topic? Thanks in advance, Ildiko Linux: > d = read.csv("CRP.csv") > d$drugCode = as.numeric(d$drug) > cor(d, use="pairwise.complete.obs") PATIENT BL.CRP X24HR.CRP X48HR.CRP drug drugCode PATIENT NA

I have applied the changes as suggested. After restarting the server, smbclient-command worked! But after I restarted the Samba Client with „/etc/init.d/samba restart“ I was once again confronted with the same problem! Again, only another server restart did the trick. Now I am facing this problem constantly. As soon as I restart, this command among others won’t work without displaying an error

Hi, ? I am trying to solve a problem related to Poincare circles ( for more info http://www.ms.uky.edu/~droyster/courses/spring08/math6118/Classnotes/Chapter09.pdf). In a nutshell i am trying to replicate the method in the above pdf section 9.2.1. that explains in broad terms how to draw the arc inside a circle that goes through 2 previously set points on the first circle. ? I think i came up

I forgot, you should also set.seed() before calling boot() to make the results reproducible. Rui Barradas On 5/22/2018 10:00 AM, Rui Barradas wrote: > Hello, > > If you want to bootstrap a statistic, I suggest you use base package boot. > You would need the data in a data.frame, see how you could do it. > > > library(boot) > > bootMedianSE <- function(data,

Dear friends. I appreciate the help that plot.date is not yet fully developed but beautiful and efficient as is anyway. I attach again an example from a real patient and now the problem is how to represent a chemical C-reactive protein (CRP) on the plot together with concentration of vancomycin. CRP was 25-200 and vancomycin below about 20. I only could get it about right by dividing CRP by

Hello, If you want to bootstrap a statistic, I suggest you use base package boot. You would need the data in a data.frame, see how you could do it. library(boot) bootMedianSE <- function(data, indices){ d <- data[indices, ] fit <- rq(crp ~ bmi + glucose, tau = 0.5, data = d) ypred <- predict(fit) y <- d$crp median(y - ypred)^2 } dat <-

Hello, Right! I copied from the OP's question without thinking about it. Corrected would be bootMedianSE <- function(data, indices){ d <- data[indices, ] fit <- rq(crp ~ bmi + glucose, tau = 0.5, data = d) ypred <- predict(fit) y <- d$crp median((y - ypred)^2) } Sorry, rui Barradas On 5/22/2018 11:32 AM, Daniel Nordlund wrote: > On 5/22/2018

Dear R-experts, I am trying to bootstrap (and average) the median squared error evaluation metric for a robust regression. I can't get it. What is going wrong ? Here is the reproducible example. ############################# install.packages( "quantreg" ) library(quantreg) crp <-c(12,14,13,24,25,34,45,56,25,34,47,44,35,24,53,44,55,46,36,67) bmi

Hello Timo, Building 2.1.11 was ok, but rebuilding pigeonhole 0.3.3 for dovecot 2.1.11 show up the following errors: checking for dovecot-config in "/usr/lib/dovecot"... /usr/lib/dovecot/dovecot- config ./configure: line 11410: -lssl: command not found checking whether OS supports plugin dependencies... yes configure: creating ./config.status config.status: creating Makefile