similar to: No subject

hi ppl :D my configuration is as follows, i run (let's call it machine 2) debian etch 4.0 and asterisk 1.2, i use voiceone (www.voiceone.it) as an interface to manage asterisk, I have a grandstream/handytone 486 as a sip device, no PSTN line or anything like that all SIP only. I have a machine (machine 1), which functions as my router and machine 2 and sip device are behind it, grandstream box

I can dial from 601 to a public number. The public number rings. I pickup and hear nothing, while on 601 it keeps ringing. (BTW, is it right to say "ringing" on the active phone?) The *CLI> doesn't show me anything useful: Executing Macro("SIP/601-8238", "dial-pstn|88097880|") in new stack Executing SetGlobalVar("SIP/601-8238",

Hi, I'm using the macro below in extensions.conf for most of my outbound calls. One issue with my current configuration is that when I make an outbound call it doesn't properly detect that my PSTN line (Zap/1) is busy with another call and then overflow to my outbound IAX connections. I think the root cause is that DIALSTATUS gets reported as BUSY. The debug output is below. My desired

Hi. I'm dialling two numbers - one that's unobtainable, one that's busy. ${DIALSTATUS} is coming back ANSWER each time right before the channels hang up. Am using the following dialplan macro to dial out. [macro-advdial] exten => s,1,Dial(${ARG1},20,g) ; Ring the interface, 20 seconds maximum exten => s,2,Goto(s-${DIALSTATUS},1) ; Jump based on status

Hi. I'm dialling two numbers - one that's unobtainable, one that's busy. ${DIALSTATUS} is coming back ANSWER each time right before the channels hang up. Am using the following dialplan macro to dial out. [macro-advdial] exten => s,1,Dial(${ARG1},20,g) ; Ring the interface, 20 seconds maximum exten => s,2,Goto(s-${DIALSTATUS},1) ; Jump based on status

Hi All, I'd just like to verify what the correct operation of the timeout parameter is for the dial application. I'm not sure if I've encountered a bug or a configuration issue. When a sip phone is not responding to invites on an outbound call, the dial application still waits the duration of timeout before continuing with dialplan execution. I was under the impression that app_dial

I got two phones on an ATA-186 (601, 602) and two phones on the TDM22B (603, 604). I have two lines on the TDM22B. I cannot figure out some of the problems: 1. 601 dials via ZAP/3-1 to local phone number at PSTN: ringing pickup on PSTN (empty) still ringing in the phone set 601 2. call from PSTN back: 601 picks up ... everything works !!! No caller id shows up 3. For testing I have only one

Hi, I was trying to use 2 of asterisk servers and interconnected, one of them as a peer to other sever (configured in sip.conf), so all the calls to server 1 will just be passed to server 2 (has PRI Card, TE 412P, only one PRI connected), i was sending calls to server 1 and that would send to server 2 and then dial out using Dahdi, but the problem that i got was the hangup cause codes, i was not

Hi All, i want to configure voice mail on Asterisk 1.4 for multiple users. let me explain you the scenario. i have 10 users with the name of 1000,2000,3000,4000,5000,6000,.......and these user can call to each other. Now i want to configure separate voice mail box for separate user. my extensions.conf ..... settings below.. [voicemail] exten => _X.,1,Dial(SIP/${EXTEN}) exten =>

Hi All! Let me explain the problem. When using the Originate? command from the manager api, the dialstatus variable returns results? for whichever phone picks up first, and in this case it is the IAX/2? connection. It doesn't matter if Zap/G2/XXXXXXX is set as the channel,? or an extension either. What I am ultimately trying to do is get the? dialstatus of the Zap/X/XXXXXXX channel, i.e.,

Hello I used to have an extension like this which worked fine with asterisk 1.0.7 I first dial to see if an IAX phone is present, if not I would try on SIP instead exten=s,1,Dial(IAX2/iax${ARG3},20,tr) ; 20sec timeout exten=s,2,Goto(s-${DIALSTATUS},1) ; Default action exten=s,200,DBget(temp=CFBS/${ARG1}) ; Get CFBS key, if not existing, goto 301

I have recently built my first asterisk system and am very impressed with its capabilities. However, I have run into one problem that hopefully someone can help me with. I am trying to use the DIALSTATUS function to route incoming calls to the appropriate Voice Mail (busy or unavailable) or to an Unavailable Number recording if the number is not assigned. However, I find that DIALSTATUS

Hi All, i want to configure voice mail on Asterisk 1.4 for multiple users. let me explain you the scenario. i have 10 users with the name of 1000,2000,3000,4000,5000,6000,.......and these user can call to each other. Now i want to configure separate voice mail box for separate user. my extensions.conf ..... settings below.. [voicemail] exten => _X.,1,Dial(SIP/${EXTEN}) exten =>

Dear All, I can not transfer call in progress. What's wrong with my macro? I think tT flags is enough right? [macro-stdexten] exten => s,1,Set(temp=${DB(CFU/${ARG1})}) ; Get CFU key exten => s,2,Set(DNDStatus=${DB(DND/${ARG1})}) ; Get DND key exten => s,3,GotoIf($["${temp}" = ""]?5) ; If not existing, goto priority 5 exten =>

I am using VoiceOne http://voiceone.it/ as my management interface. I am not 100% sure when it started, but my CDR is now full of "s" as the DST instead of the actual dialed number. As I understand it - it is because it is being recorded in the CDR while in a macro (as below). Is there any work around so that I can record the actual dialed number? [macro-dialout] exten =

Dear All, I have a problem with call transfer. When I dial a number and then I want to transfer current call to an extension, I'm getting disconnected. Transfering incoming call works fine. I'm using macro for dialing. extensions.conf: [from-internal] ignorepat => 9 exten => 200,1,Macro(stdexten,200,SIP/dzalewski) [macro-stdexten] exten => s,1,Set(temp=${DB(CFU/${ARG1})})

My dial plan seems to work great - in that when I call extensions 1234 it connects to 1234. Strangely, after the call terminates (the other side hangs up first), Asterisk continues in the same context and then matches to extensions _. which causes an invalid extension error! Why does asterisk not leave the context (called internalmenu) after the remote hangup? Instead, it continues to the

A call comes in from the PSTN, Asterisk answers it, it goes to the directory, and then to the extension the caller designates and the user at that extension answers. The user at the extension then wants to transfer the call to another extension; on the Cisco 7940 they push the ?more? soft key, then the ?Transfer? soft key, then enter the extension number they want to transfer to, and hit the

Hello all, I am working on a creating some intelligent failover dial-plan logic and I'm running into something that I'd like some feedback on. Basically, it appears that if you place a call to an IAX2 peer that refuses the connection, or is unavailable, a NOANSWER dialstatus is returned. Example: -- Executing Macro("IAX2/cubix-19",

1.6.2.0-rc1. I am having trouble with voice mail intermittently not working correctly on CHANUNAVAIL. (it may happen for other statuses too, haven't checked). Basically here's what happens: -- Executing [1651xxxxxx at mydids:1] Macro("SIP/ipkall-trunk-14838bc8", "phone,1651xxxxxx") in new stack -- Executing [s at macro-phone:1]