similar to: TE120P loosing link...

Hi guys, I have this question: Can asterisk + fax for asterisk do this ?? Send Fax on Machine A to Fax machine B?? Fax Machine A--> FXS port on digium card --> asterisk 1.6 --> Sip with t.38 --> internet --> Sip with t.38 --> asterisk 1.6 --> FXS port --> Fax Machine B I've been reading documentation for fax for asterisk, but I'll appreciate if someone can

Hi List, I'm trying to connect Asterisk with a Nortel Meridian using an E1 with MRFR2 signaling. I've connected both cards, and compiled all the required software... The problem is every call (outgoing or incoming) got dropped, complaining about some "T1 timed out" Only for testing purposes I'm using an application called testcall included on the lib-unicall package, and

Hi List... I have an asterisk box with one TDM2400, it has 8 FXS's and 12 FXO's, and it also has the echo canceller... I'm running Asterisk 1.2.13 and Zaptel 1.2.12 with the Kernel 2.6.9-34.0.2.EL I'm using Polycom's 501 with the SIP 1.6.2.0041 The problem is when someone dials to or from the PSTN through the TDM2400, the voice quality is crappy...Instead of hearing:

Hi, What version of asterisk and zaptel are you using? I've used digium TE110P card with mfcr2. I had same "T1 timed out" problem too. I've asked from support and got answer to install latest zaptel. I've installed zaptel 1.2.13 and it solved. In short try latest asterisk v1.2.x packages with unicall. >> Hi List, >> I'm trying to connect Asterisk with a

Dear asterisk users, We want setup TE121 digium board: Model: Digium TE121: VoiceBus technology allows the TE121 to use an industry standard bus-mastering PCI Express interface. http://www.digium.com/en/products/digital/te121.php My platform Server: HP Proliant 150 G5 OS: UBUNTU x86_64 GNU/Linux Asterisk: 1.4.21.2 zaptel: SVN-branch-1.4-r4662M When we enable zaptel driver for TE121, the

Hi, I'm having trouble with one machine that kernel panics with Asterisk 1.4. The motherboard is an Asus P5W Deluxe. I reported the kernel panic here: http://lists.digium.com/pipermail/asterisk-users/2009-November/241006.html I'm now trying to understand if the problem can be an IRQ issue or not. I disabled APIC in the BIOS because I thought that maybe it could be buggy (not sure

Hi, I have successfully configured DIGIUM card and successfully communicated through it to the another E1 card running application. Can anybody tell me does TE120P support MFC/R2 protocol. Thanks and Regards sanchal singh

Hi, I have successfully configured DIGIUM card and successfully communicated through it to the another E1 card running application. Can anybody tell me does TE120P support MFC/R2 protocol. Thanks and Regards sanchal singh

I have a brand new TE120P card that I have installed and asterisk is not starting as I am getting the error: ERROR[5054] chan_zap.c: Unknown signalling method 'pri_cpe' It seems it does not matter what I change the vaule for signalling= to, it always returns it as invalid. I have tried the config from my other 2 servers running TE110P cards and the config from AusTechPartniships

Hi all I use asterisk (1.2 brach) from debian official packages and it works fine. Now I need to install and configure a Digium TE120P card, but I cannot find any guide to install it using debian packages. I would like to know if anyone of you knows about packages that would include the necessary kernel modules or any other method that won't be broken when the asterisk packages are updated.

Hi, I recently installed a TE120P in my lab with a full voice PRI (23 channels + 1 D channel). Everything is working well except echo cancellation; for the most part this isn't an issue unless one of the users is in a conference. I'm getting the following error when a call is picked up (incoming or outgoing): [Feb 25 12:54:01] WARNING[8661]: chan_zap.c:1437 zt_enable_ec: Unable to

Hi Folks, I have a T100P ordered from Digium in the past. Its working perfectly fine but I now need to more the server to India (out-sourcing) and we will be getting an E1 line there. Does anyone know if T100P was capable (upgradeable) or swappable so that I could use it with the E1 lines instead? Any pointers to driver/firmware update would be highly appreciated. Thanks. R -------------- next

Dear all I got one more error my asterisk E1 card connected with avaya E1 card [avaya]-------E1-----[asterisk] i got this 2 error what is start asteris on consol mode asterisk -vvvvc [Jul 27 09:51:29] WARNING[737] chan_zap.c: PRI Error on span 0: We think we're the CPE, but they think they're the CPE too. [Jul 27 09:51:30] WARNING[737] chan_zap.c: PRI Error on

The Telco in Canada is been real painful. I was wondering if anyone has installed a Digium TE1X0P card in Canada and if their Telco was so difficult. The Telco will not provide us a service until they see a FCC or DOC number for the equipment ware are connecting to their service. If have found "FCC Part 68, ANSI/ITA-968-A, Including Amendment A1 and A2 Industry Canada CS-03"

Hi All, I'm having problems trying to get a TE120P operational in Canada. I keep getting a congestion error when I try to make a call. I'm not sure if my switching, parity, etc is correct. I'm hoping that someone will be able to verify my config. The Telco is SaskTel, with a 10 channel 50 DDI service. Zap show channels show and ztcfg -vv looks ok and the zttool show

Hello List, We purchased a TE120P card from Digium and it works great. The only problem is that we are still experiencing echo on some calls. I've tried various echo cancellers (right now we are using OSLEC) and still no luck. My question has anyone gone from the TE120P to a Sangoma A101D-X Single Port T1/E1/J1 w/ echo cancellation? Have you noticed a difference? Also I called

Hi, I've been playing with a TE120P on Asterisk 1.4.18 with zaptel 1.4.9 and I've ran into an issue. After a call placed any DTMF tone causes the server to lock up entirely. Calls placed work just fine (except for a problem with echo cancellation). The phone registered to the server is a Linksys SPA-942. I am seeing in zttool some IRQ misses, but it never seems to go above 74 (below).

Hello! I run asterisk 1.6.1.0, dahdi 2.1.0.4 with TE122. I always (and only) have missed interrupt when dahdi disables echo canceller (ng2 or oslec- no difference). Dec 29 14:00:54 asterisk kernel: dahdi: Disabled echo canceller because of tone (rx) on channel 1 Dec 29 14:00:54 asterisk kernel: wcte12xp0: Missed interrupt. Increasing latency to 6 ms in order to compensate. Is it possible to

Hi Asterisk Users, We've been experiencing some tough time regarding a new Asterisk installation connected to the PSTN via an ISDN PRI with a Digium TE121 with the optional VPMADT032 echo cancellation module. For now, I'll focus on something very specific which is summarized on this email's subject. However, here are some general facts for the context: - System pbxfri went

Hi I've been running into a weird issue, which its hard to get any information on. We successfully setup a R710 system with Asterisk 1.4.22 / libpri 1.4.7, utilizing a Digium TE121B Pci express card. However we are having some stability issues and can't seem to trace it down to if it is a card/system issue or our PRI vendor having a dirty line. I know some will say it is a old version of