similar to: Dial stops trying after ~30s regardless

here is what I have: exten => _9XXXXXXX,1,Set(l_HomeAreaCode=381) exten => _9XXXXXXX,n,Set(dialnumber=${l_HomeAreaCode}${EXTEN:-1}) exten => _9XXXXXXX,n,Dial(SIP/SIP-Provider/${dialnumber},80) not having success; "Got SIP reponse 503" Service Unavailable" On 04/27/2015 02:19 PM, Bryant Zimmerman wrote: > Motty > Yes > From your dial plan accept 9 + 7 digits

> On 27Apr, 2015, at 16:39, Motty Cruz <motty.cruz at gmail.com> wrote: > > forgot to mentioned I am running Asterisk 1.8.22.0 on CentOS. > > Thanks, > > > On 04/27/2015 02:38 PM, Motty Cruz wrote: >> here is what I have: >> exten => _9XXXXXXX,1,Set(l_HomeAreaCode=381) >> >> exten =>

Hi Guys, I am trying to make a web form where a person is allowed to put in $phoneNumber, $dialNumber, and $spoofNumber to make a call with spoof caller ID. There are a few problems that I am facing with Asterisk AMI Originate command. The reason why I want to use the darn AMI Originate is because I am sending calls to mobile phones and I want to have some accountability and to know if a call was

On Mon, 27 Apr 2015, Bryant Zimmerman wrote: > exten => _9XXXXXXX,n,Set(dialnumber=${l_HomeAreaCode}${EXTEN-1}) Missing a colon? ${EXTEN:-1} -- Thanks in advance, ------------------------------------------------------------------------- Steve Edwards sedwards at sedwards.com Voice: +1-760-468-3867 PST Newline Fax: +1-760-731-3000

Hello. I notice that when a call that is recorded with MixMonitor is transfered to another co-worker, the recording ends. exten => 409,n,Macro(SDstartrecording,external,${DID}) the incoming call then goes to a queue... [macro-startrecording] ; ARG1 = incoming DID or CALLERID(name) ; ARG2 = outgoing dialnumber ... exten => s,n,MixMonitor(/var/ftp/${NR}/${recordfile},b,chown -R

Hi I was interested to see how Mongrel uses Lex/Yacc to parse the HTTP requests using a Regal generated parser. I downloaded the source but do not see the lex and yacc files...

Hello, I would like to add area code if clients dial 7 digits, it that possible? currently clients dial prefix 9 plus local number, however my SIP provider is requiring to dial 10 digits. is it possible to add area code? Thanks, Motty

Hi All, I am relatively new to Asterisk. I have CDR enabled and successfully writing to MS SQL server. In my cdr table I am setting the userfield value with a line in my dialplan. If a call is placed to an invalid number (e.g. 12125551212), I see a cdr record created, however, my userfield value never gets set since the call never made it into the context of my dialplan. I am using AMI with the

Hi, I am attempting to implement Answering Machine Detect and have also played with using BackgroundDetect instead. Does anyone recommend one over the other? Here is the code I am using for the BackgroundDetect method (from voip-info.org). Thanks. [detect] exten => s,1,Set(MACHINE=0) exten => s,2,Answer exten => s,3,BackgroundDetect(silence/5, 1000, 50) exten =>

Hi, I am using a call file formated like this: Channel: local/12125557891 at outbound/n Callerid: 12125551212 Context: detect Extension: s Priority: 1 This sends the call into the dialplan at the [outbound] context. In [outbound], I have: [outbound] exten => _1.,1,Dial(SIP/${EXTEN}@flowroute,43) If the call is answered, it move on to the [detect] context. When using this method, it appears

Hi, I just deployed new Aastra 9480i phones and when I attempt enter digits on other systems, like host pin in a GoToMeeting, the servers on the other end do not get my entries. I am assuming this is a DTMF issue but do not see anything in this phones config other than turning on the display of the digits. I have the DTMF method set to "SIP INFO". I am using AsteriskNow w/FreePBX.

forgot to mentioned I am running Asterisk 1.8.22.0 on CentOS. Thanks, On 04/27/2015 02:38 PM, Motty Cruz wrote: > here is what I have: > > exten => _9XXXXXXX,1,Set(l_HomeAreaCode=381) > > exten => _9XXXXXXX,n,Set(dialnumber=${l_HomeAreaCode}${EXTEN:-1}) > > exten => _9XXXXXXX,n,Dial(SIP/SIP-Provider/${dialnumber},80) > > not having success; > >

Hi all, I am trying to make decisions in my dialplan based on {DIALSTATUS}. I am creating calls using AMI (rawman with parameters via URL) with action:Originate. I am using SIP and an outside voip provider for the calls. If I define the number to call in the Channel parameter (e.g. SIP/15555555555 at myvoipprovider, the call gets placed before entering the context that I defined. I understand

Motty Yes From your dial plan accept 9 + 7 digits then concat your dialed number together with your areacode. This s a brief example. exten => _9XXXXXXX,1,Set(l_HomeAreaCode=555) exten => _9XXXXXXX,n,Set(dialnumber=${l_HomeAreaCode}${EXTEN-1}) ;; This line should combine your area code and the last 7 digits of your dialed phone number exten =>

this code worked for me, here is what I did and worked for me: exten => 1381+NXXXXXX,1,Set(CALLERID(number)=3817383444) exten => 1+NXXNXXXXXX,2,Dial(SIP/SIP-Provider/${EXTEN:1},80) Thanks for you help! On 04/27/2015 02:56 PM, Matt Riddell wrote: > >> On 27Apr, 2015, at 16:39, Motty Cruz <motty.cruz at gmail.com >> <mailto:motty.cruz at gmail.com>> wrote:

Hi, please forgive me for this (hopefully) simple question. I cannot seem to find an answer or solution while searching around. I want to be able to call in to my server using my cell phone and be able to set call forwarding for my extension and enter a phone number and also be able to call in to that extension and disable the call forwarding. I see I can do this through the ARI web interface

Hi, As of v 1.6.1.1, can anyone tell me what the current possible values for DIALSTATUS could be? I found http://www.voip-info.org/wiki/view/Asterisk+variable+DIALSTATUS but believe it is outdated since there is no FAIL or FAILED in this list. Thanks! -------------- next part -------------- An HTML attachment was scrubbed... URL:

Hi, I am attempting to make about ten calls simultaneously and intermittently get 'SIP/voipprovider is circuit-busy' followed by 'everyone is busy/congested at this time" I am not sure if this is related to my bandwidth to my voip provider, a configuration issue or something else. Has anyone seen this before and have any suggestions. Thanks in advance. --------------

Hello Everyone, I am making a simple index.php file which will allow a web user to enter his $phoneNumb, $dialNumb, and callerID ($spoofNumb) and get the call bridged. Following is the index.php and the contents of extensions_custom.conf. When I submit the form nothing happens. I don't even see Manager Connected msg. Your input will be much appreciated. I am thinking I have some syntax

Hi Freinds, I am trying to do the following. 1. Accept the call from call ifle. 2, Answer it 3. Extract the dial number and variables from the call file request. 4. Pass that parameters to voiceglue 5. Catch the parameters (dialnumber and cli) in voiceglue.conf 6. Point to the voice.xml file dynamically by matching number I want to make the line in voiceglue.conf as <DEST_NUMBER>