similar to: IAX2 trunking with Older Asterisk, version ?

Hi All, Is it possible to make a IAX2 connection between asterisk 1.6.1.0 , and asterisk 1.2.14 ? i tried to use a IAX2 connection between version 1.2.14 and 1.6.1.0 but it gave an error - 1.2.14 End - Error Msg WARNING[8313]: chan_iax2.c:7103 socket_read: Call rejected by 147.120.203.71: No authority found 1.2 END , IAX.conf [trunk14] type=friend host=147.120.203.71 secret=test123

hi, The prob is when we ring 2 channels simultaneously, only 1 channel is actually ringing. In our configuration, the Asterisk box is connected to an E1 channel bank, where 15 analog extensions are conencted to channelbank inturn. We tried following, Dial,Zap/g4/444&Zap/g4/448|20|t Heres the output, -- Executing Dial("IAX2[trunk10@trunk50]/1",

The Asterisk Development Team is pleased to announce the release of Asterisk 1.6.1.0. Asterisk 1.6.1.0 is available for immediate download at http://downloads.digium.com/pub/asterisk/ This is the first release in the 1.6.1 branch, which has additional features added since 1.6.0. Please see the CHANGES file for more information about the additional functionality For those upgrading from previous

The Asterisk Development Team is pleased to announce the release of Asterisk 1.6.1.0. Asterisk 1.6.1.0 is available for immediate download at http://downloads.digium.com/pub/asterisk/ This is the first release in the 1.6.1 branch, which has additional features added since 1.6.0. Please see the CHANGES file for more information about the additional functionality For those upgrading from previous

Hello list, I try to setup an asterisk-server with different SIP-Peers to PSTN. The Peer are working and configured in sip.conf: [peer1] type=peer host=10.10.10.1 [peer2] type=peer host=10.10.10.2 Now dialout is no problem. Extensions.conf says: exten => _0Z.,1,Dial(SIP/49${EXTEN:1}@peer1,30) But how can I setup a failure-route if the SIP-Proxy "peer1" ist not

Hello, I want that, when call is answered , callee and calling would hear different prompts and after promts the calls would be bridged. I've tried this situation: exten => s,1,Set(LIMIT_CONNECT_FILE=hello-world) exten => s,2,Dial(SIP/trunk-out/37052390920|60|rL(10000000000000)A(conf-enteringno)) But these prompts play not in the same time: just after conf-enteringno prompt

Hi i have an issue getting agentLogin working /etc/asterisk/queues.conf member => Agent/1001 member => Agent/1002 extension.conf exten => 110,1,Wait,1 exten => 110,2,AgentLogin() now, i call 110 by a firefly client, trying to login in as 1001 agent: Aug 12 16:31:36 DEBUG[1103408048]: chan_sip.c:4423 build_route: build_route: Contact hop: <sip:sip3@192.168.1.151:5060> --

I am trying to make sure my DID and SIP account details are working properly and engaging the extensions.conf and dial plan. I have a successful SIP session registered: Connected to Asterisk 11.3.0 currently running on Asterisk (pid = 922) Asterisk*CLI> sip show registry Host dnsmgr Username Refresh State Reg.Time sip3.voipvoip.com:5060

Without using Dundi or SER, any thoughts on the following anyone? Has something similar been implemented anywhere so as to me not having to horribly butcher code... 4 servers SIP1-4 User1 -- -- SIP1 -- \ / \ User2 ------ Go to register ------- SIP2 ----- Whereis? --> DB / \ / User3 --

I have a very lite layout and attempting to get the SIP configuration set up initially before proceeding into other areas. VMware is running my Asterisk 11 on Ubuntu 12. Shouldnt I be able to at least ping the SIP provider IP? I run command "sip show registry" and do not see it set up. I run sip show peers and I do see an entry. I have not configured anything other then entries in the

This seems basic but something is missing..... I dial from my cell phone to my DID and enter the context in extensions.conf I am hoping to cascade through the plan and successfully automatically dial the 1444 number listed. But it fails. And, I dpon't know why? Should I removed the Hangup application? Syntax issue somewhere? I have a good SIP registration with the vendor, voipvoip.

Hey, You know, the Digium guys said both are good. They said the the DNS method is better because you dont have the extra point of failure (SER) but said the SER method is better in that it gives you more exact control in the handling of the calls and registration. They did acknowledge there would be a possible downtime only for incoming calls to users with dynamic IPs if the

Grrr. I'm using outlook web access and there's no way to do inline replies. Anyway... Gabriel. Using SER does not create a single point of failure. You install three SER boxes. Single point of failure gone. It does not take several seconds. If your phones are configured for SRV, and 2/3 of your SER boxes down, it takes about 2s. That's not bad for a 2/3 system failure. You can

> -----Original Message----- > From: Alexander Lopez [mailto:Alex.Lopez@OpSys.com] > Sent: Thursday, March 16, 2006 8:46 AM > To: Asterisk Users Mailing List - Non-Commercial Discussion > Subject: RE: [Asterisk-Users] Feedback from VON expo! Info on > *HAandPolycomphone!! > > > > > > "Q: What are the plans for HA? > > That's BS. Last time I

Dear all, I'd like to know if there is a way for multiple asterisk servers to share a common SIP and/or IAX registry. The setup I imagine would be something like : - several asterisk servers called sip1.isp.com, sip2.isp.com, ... - a DNS alias sip.isp.com pointing to all the addresses (thus providing a round robin resolution on each server) - each SIP client would register with sip.isp.com

So, tweaking configs, rebuilding this and that... restarting, twiddling, it works (yeah!), but fails on re-boot to work at all. Consistently, though. I believe it comes down to this: I can call out only *after* I've received a call. So, cold boot. Then: modprobe dahdi modprobe wctc4xxp modprobe wcfxo dahdi: Telephony Interface Registered on major 196 dahdi: Version: 2.1.0.3

Hi all. I have 2 ip phones (Grandstream Budgetone): -budgetone1 -budgetone2 All two are connected to an Asterisk server. When I make a call from budgetone1 to budgetone2, I can speak with budgetone2 whith no problem. But when budgetone2 hangs up, budgetone1 does not play any tone (like busy tone). Budgetone1 seems to be still in conversation, but what conversation! Has anyone had a problem

Dear all, I am currently trying to configure a PBX make use of a multiple of outgoing lines, currently my extensions.conf looks something like below >> ; extensions.conf ; 20th October 2008 [globals] sip1=201 sip2=202 sip3=203 sip4=204 [general] autofallthrough=yes [default] [incoming_calls] exten => _89859715,1,Dial(SIP/201) exten =>

Hi all, Seriously, I've tried to read everything I could find (& search for) on voip-info.org and other sites about this problem, but have been unsuccesful. Equipment: xten lite X100P Whitebox linux running Asterisk / AMP D-Link DI-804HV (VPN router) I have installed another DI-804HV at a second location and created a tunnel. For the computers behind that unit, everything works fine

'lo, A provider sets up an Asterisk box in order to service the needs of a small number of customers. The provider issues SIP handsets and the users register with sip.telco.com Thanks to the selection of a brilliant family of technologies, including SIP and Asterisk, the telco.com company grows and grows. Eventually, beyond the point that they can really hold all of the customer SIP