similar to: Fax Machines across carrier SIP trunk? General recommendation?

Anyone have a customer sending/receiving multi-page faxes over Verizon Business SIP trunk/g711 ? Verizon Business indicates they don't support it, and I have 2 recent customers that it doesn't work for, and 1 current large customer telling me he's going to make it work <grin>. The issues is the latency/jitter on fax/g711 over Verizon Business seems to spit out only 11

On Thu, 14 Jun 2018 18:57:11 -0700 Siwei Liu <loseweigh at gmail.com> wrote: > Thank you for sharing your thoughts, Cornelia. With questions below, I > think you raised really good points, some of which I don't have answer > yet and would also like to explore here. > > First off, I don't want to push the discussion to the extreme at this > point, or sell anything

Hi I have a simple hub and spoke topology where all my nodes connect to a central node. Below is tinc.conf for main node *tinc.conf* Name = main Interface = tun0 Forwarding = kernel and the remote nodes have same with ConnectTo = main. I have tried to apply a basic iptable policy on the main node but the traffic still seems to passthough and the nodes can communicate with each other. How do I

On Fri, 15 Jun 2018 10:06:07 -0700 Siwei Liu <loseweigh at gmail.com> wrote: > On Fri, Jun 15, 2018 at 4:48 AM, Cornelia Huck <cohuck at redhat.com> wrote: > > On Thu, 14 Jun 2018 18:57:11 -0700 > > Siwei Liu <loseweigh at gmail.com> wrote: > > > >> Thank you for sharing your thoughts, Cornelia. With questions below, I > >> think you

I thought XO was reselling Level 3s (old Genuity assets) network/voip just like Qwest ? -----Original Message----- From: asterisk-users-bounces@lists.digium.com [mailto:asterisk-users-bounces@lists.digium.com] On Behalf Of jk@bingoconsulting.com Sent: Wednesday, October 11, 2006 3:38 PM To: asterisk-users@lists.digium.com Subject: [asterisk-users] Load balance Asterisk server,when it is a SIP

Hello Everyone, We are looking to transition our 23 channels from testing/lab into production. During testing we used the free open source g729 license using the instructions found here: http://blog.manhag.org/2010/05/installing-the-free-g729-codec-for-asterisk/ A little more about our setup. All recordings have been converted to G729, all voicemail messages are also in G729, finally

Thank you Guillermo. I will give it a go and revert back with my results. Regards Yazeed Fataar <yazeedfataar at hotmail.com> On Mon, Feb 13, 2017 at 2:26 PM, Guillermo Bisheimer < gbisheimer at bys-control.com.ar> wrote: > Hi Yazeed, > > You have to add this to tinc.conf > > TunnelServer = yes > > Otherwise tinc will manage package routing internally. Then you

Greetings, I have a vm on debian 9.5 to which I pass an specific usb from the host. here is the relevant part in the vm's xml file: <hostdev mode='subsystem' type='usb' managed='yes'> <source> <vendor id='0x148f'/> <product id='0x5572'/> </source> <address type='usb'

Hi experts I use xen-4.0.0 and dom0 is 2.6.33 and domU is 2.6.34 #lspci ............... 01:00.0 Ethernet controller: Intel Corporation Unknown device 10a7 (rev 02) 01:00.1 Ethernet controller: Intel Corporation Unknown device 10a7 (rev 02) 05:00.0 Ethernet controller: Intel Corporation 82571EB Gigabit Ethernet Controller (rev 06) 05:00.1 Ethernet controller: Intel Corporation 82571EB Gigabit

On Fri, Jun 15, 2018 at 4:48 AM, Cornelia Huck <cohuck at redhat.com> wrote: > On Thu, 14 Jun 2018 18:57:11 -0700 > Siwei Liu <loseweigh at gmail.com> wrote: > >> Thank you for sharing your thoughts, Cornelia. With questions below, I >> think you raised really good points, some of which I don't have answer >> yet and would also like to explore here.

I've been pointed to this discussion (which I had missed previously) and I'm getting a headache. Let me first summarize how I understand how this feature is supposed to work, then I'll respond to some individual points. The basic idea is to enable guests to migrate seamlessly, while still making it possible for them to use a passed-through device for more performance etc. The means to

On Tue, Jun 19, 2018 at 3:54 AM, Cornelia Huck <cohuck at redhat.com> wrote: > On Fri, 15 Jun 2018 10:06:07 -0700 > Siwei Liu <loseweigh at gmail.com> wrote: > >> On Fri, Jun 15, 2018 at 4:48 AM, Cornelia Huck <cohuck at redhat.com> wrote: >> > On Thu, 14 Jun 2018 18:57:11 -0700 >> > Siwei Liu <loseweigh at gmail.com> wrote: >> >

Hello, I have success with passthough nvidia gtx 680 with hardware modification to nvidia grid k2 with using kvm, but i think it will works with xen too. This is is message about hardware modification http://www.eevblog.com/forum/projects/hacking-nvidia-cards-into-their-professional-counterparts/msg207550/#msg207550 Thank you. _______________________________________________ Xen-users mailing

anyone has any idea regarding this issue? > Sent: Monday, November 05, 2018 at 7:55 PM > From: daggs <daggs@gmx.com> > To: libvirt-users@redhat.com > Subject: [libvirt-users] usb post passthough stopped workng after kernel upgrade > > Greetings, > > I have a vm on debian 9.5 to which I pass an specific usb from the host. here is the relevant part in the vm's xml

Hi ! I have a TDM40B and i try to use it connected to modem for incoming call data transfert. I have no problem to use it with a phone and a talk communication work fine. But when we try to use with modem, with most modem, we got data carrier for few seconds and channel hungup. < [ TYPE: Null Frame (4) SUBCLASS: N/A (3) ] [Zap/4-1] -- Zap/4-1 is ringing << [ TYPE: Null Frame

> -- Format for call is ulaw Try the slin codec, I didn't have good results until I used slin.

I changed from a TE410P to a TE411P and fax carriers weren't detected anymore ! I have tried everything (recompile zaptel+asterisk+spandsp ; echocancel=yes/no ; rxgain=0/txgain=0 ; increase Wait() ; ...), nothing worked. The only solution that worked for me was to install and use NVFaxDetect. HTH.

&nbsp;Hi! &nbsp;&nbsp;&nbsp;I&nbsp;want&nbsp;to make windows work&nbsp; with native graphics card on xen with no iommu (no vt-d) support. With many googling, I&nbsp;find that xen with Neocleuse 1:1 No-IOMMU passthough patches maybe can meet my requestment. &nbsp;&nbsp; I download and compile a copy of direct-io.hg source, and pass my graphics card to hvm

Thank you for sharing your thoughts, Cornelia. With questions below, I think you raised really good points, some of which I don't have answer yet and would also like to explore here. First off, I don't want to push the discussion to the extreme at this point, or sell anything about having QEMU manage everything automatically. Don't get me wrong, it's not there yet. Let's

Hi guys, i have 4 Xen servers, two with Xen 3.2.1 and the other two with Xen 4. All four servers with 3 network card attached to different networks, 3 of these interfaces are bridges (configured in the ''/etc/network/interfaces'' config file, NOT in xend-config.sxp file) and one is used for the ISCSI service, where the virtual machines are loaded. The problem is,