Displaying 20 results from an estimated 3000 matches similar to: "Silly (??) question about chan_dahdi"
2012 May 09
5
Belgian BRI (euroisdn): what to use for a B410P
Hi,
I'm experiencing difficulties to get a B410P running with Asterisk
10.3.1 and DAHDI 2.6.1.
Am I supposed to use DAHDI for this card and ISDN BRI for my country
(Belgium)?
thx,
BC
2011 Apr 06
3
BRI Configuration help me
Sir,
i am using goautodial server , bri card is showing ok but when i try to call
that showing below ,
This configuration is in doing in dubai , so kindly help me how can connet
the call from this ,
what is my mistake is in this
:::chan-dahdi.conf
[channels]
#include
dahdi-channels.conf
language=en
context=default
usecallerid=yes
hidecallerid=yes
callwaiting=yes
usecallingpres=yes
2014 Aug 01
1
Connecting Asterisk and BT Versatility PBX via NT BRI port
Hi All,
I've a BT Versatility PBX that I want to connect to my asterisk 11.9.0 box via BRI port in NT
mode but actually I wasn't able to get it working. I've another standalone PBX, it's a
Panasonic model, which works fine connected to the same port. The BT connected to a UK
BT BRI line works quite fine after roughly a minute once connected. The PBX can be
seen at
2010 May 09
1
B410P and Patton smartnode : any success ?
Hi,
1. Has someone met any success at all, connecting a Digium B410P to a Patton
Smartnode 4638 (with latest 5.3 firmware) ?
2. If positive, then, which signalling was used on both sides ?
My project's goal is use a Patton Smartnode 4638 to act as telco BRI lines,
from a B410P-enabled asterisk box.
In my testings, I can see channel is respectively up (with patton web server
status page)
2009 Apr 03
1
ISDN Timer T309
<!DOCTYPE html PUBLIC "-//W3C//DTD HTML 4.01 Transitional//EN">
<html>
<head>
</head>
<body bgcolor="#ffffff" text="#000000">
Hi everione,<br>
<br>
I'm make some test with pri timer T309. I'm using asterisk 1.4.23.1,
libpri 1.4.9, dahdi-linux 2.1.0.4 and dahdi-tools 2.1.0.2. But in my
tests, the timer fail with a telco
2009 Mar 10
3
Update chan_dahdi.conf doc in voip-info.org
Hi,
It seems BRI signalling settings are missing from
http://www.voip-info.org/wiki/view/Asterisk+config+chan_dahdi.conf
I would like to add those parameters :
bri_cpe_ptmp
bri_cpe
bri_net
Is this http://www.voip-info.org/wiki/view/Asterisk+config+chan_dahdi.conftied
to a specific Asterisk version ?
Can I edit this ?
Regards
-------------- next part --------------
An HTML attachment was
2011 Apr 07
4
asterisk SIP MESSAGE method support
Hello List,
I have found that asterisk supports only forwards in-dialog MESSAGE method. That is, if the MESSAGE method is sent within an active call.
But according our requirement we need to send MESSAGE method to the other leg without being in a call (general stateless proxy forward). Is it possible to do this in asterisk using some tricks?
Regards,
Rajib Deka
SIEMENS Ltd.
Robert V Chandran
2010 Dec 16
1
PTMP BRI Unable to receive TEI from network in state 2(Assign awaiting TEI) - Asterisk 1.6.2, Latest DAHDI, LibPRI
Hi all,
Last night I went to replace an Asterisk 1.4 + mISDN + b410p box with
Asterisk 1.6.2 and DAHDI BRI - to no avail.
I had two servers so copied network setting etc from the working one,
moved the card across, ran dahdi_genconf etc and it didn't work.
Here's the console output with notices disabled:
lucas*CLI> pri intense debug span 1
Enabled debugging on span 1
[Dec 16
2009 Mar 16
3
Asterisk 1.6 ReceiveFAX problem
hi,all
i have just set up asterisk 1.6.0.7 rc1 with spandsp 0.0.5 pre4 to ReceiveFAX, link to a E1 (DE410P) using dahdi
this can receive the fax from E1 successfully, but i see many error message in the log like this:
[Mar 16 09:24:38] ERROR[23540] channel.c: ast_read() called with no recorded file descriptor.
when i receive a 5 pages fax, i will see this error message over 200 lines.....
it
2010 Dec 27
1
Asterisk 1.4.38 - unknown signalling bri_cpe
Hi,
we upgraded an Asterisk 1.4 with mISDN to 1.6 with chan_dahdi. Due to
problems with iax channel posted earlier, we wanted to switch back to
1.4 version.
Server has 2 HBA cards, everything is running fine with 1.6, bri_cpe is
recognized and the 7 euroISDN channels are running well, ingoing and
outgoing.
Now we installed 1.4.38 version and no more ISDN. In logs we found this:
[2010-12-24
2014 Jul 08
1
chan_dahdi.conf sintax
Hi All
This may be a silly question but...
I have this dahdi_genconf generated file:
; Autogenerated by /usr/sbin/dahdi_genconf on Fri Jul 4 22:05:29 2014
; If you edit this file and execute /usr/sbin/dahdi_genconf again,
; your manual changes will be LOST.
; Dahdi Channels Configurations (chan_dahdi.conf)
;
; This is not intended to be a complete chan_dahdi.conf. Rather, it is intended
; to
2008 Nov 12
4
test OpenVox B400P and junghans card for dahdi BRI wcb4xxp
hello:
thanks for Tzafrir Cohen for dahdi testing.
I installed dahdi-2.1-r3c svn code and asterisk1-6
for testing OpenVox B400P and junghans card. i fund that there is bug (i think) to dectect NT or TE mode. actually on the board,
i set it as TE mode, but after start wcb4xxp, but
it show the port is NT mode. to detect the TE mode, I modefy the code in base.c
2011 Jan 11
1
Issue with Red Alarm with DAhDi
Hi!
I have an analog line connected to my asterisk and when I try to answer a call I get this
-- Starting simple switch on 'DAHDI/7-1' -- Executing [s at from-pstn:1] Answer("DAHDI/7-1", "") in new stack -- Executing [s at from-pstn:2] Playback("DAHDI/7-1", "vm-intro") in new stack -- <DAHDI/7-1> Playing 'vm-intro' (language
2016 Jan 05
3
Detected alarm on channel 3: Red Alarm
Hi everyone!
I have a Digium Card TDM410
But, it appear for me this massege
chan_dahdi.c:8061 handle_alarms: Detected alarm on channel 3: Red Alarm
But my line is ok!
But sometimes it back
sig_analog.c:3807 analog_handle_init_event: Alarm cleared on channel 2
But it again back to red alarm.
What can be happen?
My lines is all ok! But when I put on Digium Card TDM410 is very inconsistent
2012 Jul 24
5
DAHDI problems
Is a normal functionality?
when I do
#dahdi_cfg -vvvvvv
In my Asterisk console shows this....
[Jul 24 13:39:08] NOTICE[30263]: chan_dahdi.c:9461 pri_dchannel: PRI got
event: HDLC Abort (6) on Primary D-channel of span 1
If I do this a lot of times...then
[Jul 24 13:39:20] NOTICE[30263]: chan_dahdi.c:9461 pri_dchannel: PRI got
event: HDLC Abort (6) on Primary D-channel of span 1
[Jul 24
2009 Mar 09
4
DAHDI and B410P (BRI)
Hi all,
I am having trouble setting the signalling method for the B410P using
DAHDI. Asterisk complains that it has never heard of 'bri_cpe' or
'bri_net' - but it doesn't mind having 'pri_cpe' etc.
ERROR[4294]: chan_dahdi.c:11327 process_dahdi: Unknown signalling method
'bri_net'
Dahdi - dahdi-linux-complete-2.1.0.4+2.1.0.2
Asterisk - 1.4.23.1
Libpri - 1.4.9
2008 Nov 26
7
Dahdi, b410p and looping from 1 port to another
Hello,
Is it possible, for testing, to connect an cat5 straight patch cord between
2 ports of a Digium B410P card and use these 2 ports as a normal dahdi trunk
?
I've tried this:
One port is set as NT, the other as TE.
I would expect timing to come for system hardware so I choose in
/etc/dahdi/system.conf :
span=1,0,0,ccs,ami
span=2,0,0,ccs,ami
Results:
- both ports lights are green
-
2008 Nov 27
1
Unknown signalling method 'bri_cpe
Hello,
Using libpri-1.4.7 and asterisk-1.6.0.1, I've got "Unknown signalling method
'bri_cpe" when "module load chan_dahdi.so".
Googling with "chan_dahdi bri_net" don't help much.
Shall I upgrade to 1.6.1rcXXX to get 'bri_cpe" support ?
Regards
-------------- next part --------------
An HTML attachment was scrubbed...
URL:
2016 Jan 05
2
Detected alarm on channel 3: Red Alarm
Humm, if I put a filter in this lines, maybe back?
2016-01-05 12:36 GMT-02:00, Ryan, Travis <RyanT at oscarwinski.com>:
>
>> -----Original Message-----
>> From: asterisk-users-bounces at lists.digium.com [mailto:asterisk-users-
>> bounces at lists.digium.com] On Behalf Of Vitor Mazuco
>> Sent: Tuesday, January 05, 2016 9:21 AM
>> To: Asterisk Users Mailing
2010 May 09
0
Bug or feature: comments in chan_dahdi.conf.sample
Hi,
1. From chan_dahdi.conf.sample (asterisk 1.6.1.18) :
; Switchtype: Only used for PRI.
;
; national: National ISDN 2 (default)
; dms100: Nortel DMS100
; 4ess: AT&T 4ESS
; 5ess: Lucent 5ESS
; euroisdn: EuroISDN (common in Europe)
; ni1: Old National ISDN 1
; qsig: Q.SIG
;
;switchtype=euroisdn
At the same time, dahdi_genconf