similar to: Numeric Hangup Code

I am sending SIP or H323 calls to a carrier, and I need to store in the CDR why the calls are rejected or why they hang up. In SIP, it can be code 503, 500, 488, etc. How do I get the information in my dialplan? I don't mean $(DIALSTATUS}, but the real numeric code F.Alves

I need to access number received after a I dial a SIP or H323 call? suppose I get one of these: *404 Not found **486 Busy here **408 Request Timeout **480 Temporarily unavailable **480 Temporarily unavailable **403 Forbidden (+) ** 410 Gone **301 Moved Permanently **410 Gone ** 404 Not Found (=) **502 Bad Gateway **484 Address incomplete* How do I get the 404, 486, etc. F.A. -------------- next

I'm making outbound calls by placing call files in the asterisk outgoing directory. At times, the call would be hung by SS7 without even attempting (due to error in the outgoing number). I get the following on console: -- Attempting call on ss7/9297210213 for s at croom:1 (Retry 1) -- Sent IAM CIC=22 ANI=9134904821 DNI=9297210213 RNI= -- SS7 hangup 'SS7/callserver/22'

Regarding this I've read the specs linked to in detail, but I can find no mention anywhere of any change that implies or states that no ring time will be recorded anymore in Asterisk 13 and that all times in start and answer columns will now be equal for all calls. Can this be because I nowhere use the Answer() application in my dialplan when dialing out? -----Original Message----- From:

Hello Everyone. In my outbound contexts, I'm using "${DIALSTATUS}" to fail over to other routes if the chosen route rejects the call. Now, My current scenario is if I get "BUSY" back from the first provider, I send a busy back to my customer. If I get something like CHANUNAVAIL (Like a SIP 503) I advance to the next carrier and attempt the call. This works

> Hi Gareth Blades & Doug, > > Thanks so much for for the feedback. I have searched on lot of documents > but couldn't able to find clear answer regarding it. > > I hope you guys replies are very much help all in aterisk community. > > > Thanks & Regards, > > Vidura Senadeera, > > Network Engineer, > > Debug Solutions > > Sri Lanka .

asterisk 11.1 Documentation in cdr.conf for endbeforehexten reads: Normally, CDR's are not closed out until after all extensions are finished executing. By enabling this option, the CDR will be ended before executing the "h" extension and hangup handlers so that CDR values such as "end" and "billsec" may be retrieved inside of of this extension. I have

I am having a problem with ${DIALSTATUS} and )=CDR(disposition) disagreeing. Below is a dialplan snippet and the resulting CLI output. This is running in an 'h' extension. Noop(DIALSTATUS=${DIALSTATUS}) Noop(CDR(disposition)=${CDR(disposition)}) -- Executing [h at pbxmax-dial-simple:1] NoOp("SIP/msx_01-0000005b", "DIALSTATUS=ANSWER") in new stack

What would it do if you exten => h,1,ResetCDR(w) exten => h,2,NoCDR() exten => h,3,DEADAGI(get-unqiueid.php) I have not tried it but in theory it should write the first CDR and then kill the write of the second NO ANSWER CDR. Let me know if it works for you as I may need to do it on some of my h exten code as well. Bryant ---------------------------------------- From:

Hi all, I've been working on debugging a bit of a custom dialplan system, and seem to have run into some issues on our development server. Hopefully someone can give me some pointers on this one! =) In a nutshell, we have a hangup extension that's being triggered to feed data back to an api on our main webserver that seems to be randomly "losing" the dialstatus channel

Hi There. I have the following setup : Asterisk 1.2.4 , freePBX 2.0.1, spandsp-0.0.2pre24 My problem is as follows : If I set up a very simple extensions.conf. when I dial from a fax machine, it seems as if no fax is being recognised. If I answer the call, I can hear the fax machine beeping. extensions.conf :

According to http://www.voip-info.org/wiki-Asterisk+variable+DIALSTATUS when a caller hangs up before the callee has time to pick the phone up then DIALSTATUS should be CANCEL. And it is. However, the disposition field in the CDR table is "NO ANSWER". So if I analyze the CDR data I won't be able to discriminate calls cancelled by the caller and calls not answered by the callee

hello perl experts i am working with "ast-rad-acc.pl" from http://www.voip-info.org/tiki-index.php?page=PortaOne+Radius+auth i dont know why $cdr{'DNID'} and $cdr{'CALLERID'} under 'sub send_acc {' are empty. i m successfully connected with asterisk manager and when call i hangup my perl application is getting that all other thing are ok but i dont know why only

Hi all, I need 2 CDR Records of below 2 numbers for outgoing calls, detail is given as below: *96XXXXXXXX88XXXXXXXX* *=> Call file : outbound call generate through below file* Test.call ====== Channel: local/s at outgoing/n WaitTime: 45 Context: outgoing_ivrs Extension: s Priority: 1 Set: contact_no=96XXXXXXXX extensions.conf ============ [outgoing] exten => s,1,NoOP(----- First LEG

Hi all, I'm using Asterisk 1.0.9-BRIstuffed-0.2.0-RC8o on box A with a TE410P (EuroISDN cpe) connected to another similar asterisk box B acting as EuroISDN master. I'm performing some load tests by contiously feeding up to concurrent 30 call files to /var/spool/asterisk/outgoing/ on box A which inititate via a dialplan context/extension a outbound call (redirected via chan_local) to

Hi all, There is a case in which the call counter is not set to zero for a sip peer (incoming call). Here is the scenario. Dialplan: exten=> 1,1,Dial(SIP/U1) exten=> 1,2,Gotoif($["${DIALSTATUS}"="ANSWERED"]?:10,1) exten=> 1,3,Hangup exten=> 10,1,Voicemail() If a user just registered with my asterisk and due to some reason after sometime the user's ATA gets

2013/3/29 Julian Lyndon-Smith <asterisk at dotr.com> > check out the endbeforehexten option in cdr.conf > > this needs to set to "yes" > > Julian > Unfortunately, this doesn't help. Let's drop the hangup handler at the moment, and focus on the "saving to file" part. Then my issue is I can't update CDR value is hangup exten. Here is a

Hi All I have a problem with mixmonitor in 13.4.0 doing the following: 1. Caller phones in 2. Reception picks up 3. Talks to caller 4. Does attended transfer, talks to manager to screen the caller wanting to speak to him 5. Complete the transfer by putting down her handset so the caller can speak to the manager 6. Caller talks to the manager The problem is that mixmonitor only records

Dear Mailinglist-User currently we`re working with an IP-PBX, based on Asterisk, with SIP, H.323 and ISDN-Capabilities. SIP and ISDN works fine, but H.323 not. In our first test, we started to connect Asterisk to an Cisco IOS-Gatekeeper with the "chan_oh323" (version 0.6.5). We successfully tested in/egress calls without any problems. But when we started to connect our Asterisk

Hi, I'm having problem with call parking. When I park call, either via transfer to xten or park digit sequence from features.conf, I hear the parking lot number read to me and the user gets transferred. However, MOH stops for the caller the moment user is transferred. The user can be retrieved by dialing the parked extension and voice resumes. If the parked user hangs up, the channel state