similar to: asterisk-users Digest, Vol 58, Issue 17

> > Different brand/model, but similar as they are both el cheapo, > entry-level headsets. I tried using them on a laptop, and I get > marginally better microphone output, even with its volume cranked all > the way up + automatic gain control enabled. > > I guess those on-board soundcards by Realtek aren't as good as a > quality microphones. I'll get a USB headset

> > That would be called a milliwatt generator. It likely exists in their > central office, but its typically used by their technicians to ensure > new installations meet specs and sometimes in troubleshooting. Call your > telco repair number and see if they will give you the telephone number > for it. I'll try that. 1st line technical support at Telstra are not known for

hi to all, im currently installing rrdtool-1.2.15 with my box CentOS 4.3 final ,before i installed rrdtools there 2 files suggested need to installed the FreeType 2 and libart_lgpl 2.3 everything is fine when installed two files but when i try to installed rrdtool when i issue command ./configure --prefix=/usr/local/rrdtool-1.2.15 this should the output ,any suggestion what's the problem

Hi! I have a question concerning the rcdk package: I generated a test sdf-file with 3 molecules in it and tried to perform clustering by fingerprints and plot the results in a dendogramm. This is what I did: mols <- load.molecules ("molecules.sdf") fp.list <- lapply (mols, get.fingerprint, 'maccs') fp.dist <- fp.sim.matrix (fp.list, method='tanimoto')

I have an x100p which suffers from echo (no surprise there apparantly :), and a few of the things I've read about tuning out echo say the first thing to get right is the tx and rx gain, and for that you need a few different types of test lines from the telco (Telstra, Optus, whatever). Does anyone have any numbers in Australia for such lines? I think they just need to send out a tone of a

https://bugzilla.samba.org/show_bug.cgi?id=8829 Summary: rsync -uav --delete --dry-run prints delete file list in reverse order Product: rsync Version: 3.0.9 Platform: All OS/Version: All Status: NEW Severity: minor Priority: P5 Component: core AssignedTo: wayned at samba.org

I anticipate lacking of prior experience with dimensionality reduction problems. Some scientists concerned with drug discovery performed several steered Molecular Dynamics simulations of the alanine-dipeptide molecule dragged by a radial force from an equilibrium conformation to another different equilibrium conformation. They sampled at regular intervals 7 dihedral angles, 5 bending angles, and

------=_NextPart_84815C5ABAF209EF376268C8 Content-type: text/plain; charset=ISO-8859-1 Hello! This is just a quick note to inform you about an 80-page report on the Pharmaceutical Industry that we're able to provide you - at no cost. Compiled by some of the best analysts in the industry, the report provides an insight into the latest trends and strategies in the Pharmaceutical Industry.

Hello. The procedure so that it works you can find in: http://www.voip-info.org/wiki-Convert+WAV+audio+files+for+use+in+Asteris k a the files .wav chmod 755 file.wav sox file.wav -r 8000 file.gsm resample -ql chmod 755 file.gsm in extensions.conf xxxx=> xxx,x,playback(file) Ing Javier Rios Ing de Proyectos 04167285748 212 2637246 /2637187 -----Original Message----- From:

Greetings, I would like to use a data.frame with strings to feed the expression() in the title of a plot. The way I did this is: molecules <-data.frame(name=c("o3","no","no2"),expression=c("quote(O[3])","quote(NO)","quote(NO[2])")) for (mol in c(5,7,9)) { plot(x, y, type="b",

This may be commonly known but I haven't come across it so here goes, maybe it'll help someone: I have terrible echo with asterisk 1.2, zaptel 1.2.12, and a TDM400P with 1 FXS and two FXO modules. The Mark2 echo canceller with Aggressive turned on was the only setting that would make it acceptable. I found fxotune with this zaptel version to be broken. I pulled the latest fxotune.c

I understand that the X100P card is matched to a 600 ohm impedance but the UK BT phone system is not (I haven't been able to find much information on the impedance of the UK system). Has anyone come up with an easy way to match the impedance between the two so the X100P can work in the UK? Presumably a simple transformer won't do the job since it won't pass the DC components? --

What FXO interface methods are folks using successfully in the UK? I'm looking for good, known-to-work solutions for commercial use for two PSTN trunks on an Asterisk box. Here's the options I have, as I see it: i) Two Digium X100Ps. Pro - cheap (c. ?120), CE approved. Con - UK line impedance mismatch, with resulting echo problems, plus needs two PCI slots. ii) Digium TDM400P with two

Hello. The procedure so that it works you can find in: http://www.voip-info.org/wiki-Convert+WAV+audio+files+for+use+in+Asteris k a the files .wav chmod 755 file.wav sox file.wav -r 8000 file.gsm resample -ql chmod 755 file.gsm in extensions.conf xxxx=> xxx,x,playback(file) Ing Javier Rios Ing de Proyectos 04167285748 212 2637246 /2637187 -----Original Message----- From:

hello , Iam working on the rcdk package ,when i start with it using the load.molecules fuction this is the error message returned Error in if (!file.exists(f) && !grep("http://", f)) stop(paste(f, ": Does not exist", : missing value where TRUE/FALSE needed could someone help me with this,thanks in advance regards Hari [[alternative HTML version deleted]]

<http://themoonlight.blogcu.com/5929751/>Can living things be created from dead and nonliving things? ** *Dr Metin GUNGORMUS * * ------------------------------ * ** ** *Atoms and molecules are not alive, and organelles are also not alive, but a living cell is a collection of non-living atoms and molecules. ( **From atoms to living organisms *

Has anyone ever heard of this so called Dynamic Impedance matching on the ADIT 600? I called their support and they've never heard of it. We are of course having echo problems are on the far end due to digital/analog conversion on the local end using a channel bank. We have purchased an ADIT 600 and yes the complaints are "far less" however we're still getting them. While I have

Hi, I am a method developer in drug discovery. I have developed a similarity searching method for small (drug-like) molecules. I want to compare the performance of my method to the performance of other methods. Similarity searching methods are commonly assessed by their ability to (re)discover a set of molecules that is avtive versus a given target, given one randomly selected query molecule.

-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 Hi, I have a dual stack server with Dovecot 2.1.10 listening on v4 and v6 Dovecot has a Comodo SSL certificate issued via NameCheap that works as expected with IPv4 in 10-ssl.conf I have enabled these configuraction directives: ssl = yes ssl_cert = < /path/to/file.crt ssl_key = < /path/to/file.key ssl_parameters_regenerate = 202 hours If I

Hello R Users, I am interested in using R to generate quantitative structure-activity relationships (QSARs) for small molecules given a set of molecular descriptors (the X's) and biological data (Y's) (usually tab-delimited data files). Has anyone done this using R ? Would you be willing to share your R scripts (or ideas) for doing this with me ? I am particularly interested in