similar to: pri errors..

getting some errors on my test system. this is 1.4 (Asterisk SVN-branch-1.4-r214194) with a 4 port T412p card. Three of the ports are connected: Span 1 to the PSTN on a 10 channel bearer line, ports 2 and 3 are cross-overed (!) to each other. Port 4 is not plugged in. This has been working fine for several months. I updated a few days ago to the latest 1.4 branch. However, now I cannot dial into

I'm using QSIG between Asterisk and an NEC SV8300. Whenever I make a call from the SV8300, I see: [Oct 4 21:02:49] ERROR[5729]: chan_dahdi.c:12226 dahdi_pri_error: !! < Unknown IE 50 (cs5, len = 3) I see an IE 50 in the Q.932 specification, so I don't understand why this error is occuring.

Hi, I suddenly started to receive an error like [Aug 4 14:26:57] ERROR[2477]: chan_dahdi.c:10515 dahdi_pri_error: No more room in scheduler [Aug 4 14:26:57] ERROR[2477]: chan_dahdi.c:10515 dahdi_pri_error: Asked to delete sched id -1??? and it went on till i reboot asterisk and dahdi services.. I wonder what caused this error, because there were no physical problem between pbx and asterisk

Hello, for a long time i am using asterisk 1.6 with astgui. but for production system i intend to use asterisk 1.4 which i think might be more robust. And for a more developed service options i preferd to install with freepbx. But still there are big plusses and minusses for both system. My complain about astgui+1.6 was.. For example there were no backup trunk config running on that version.Even

Got this in the log, with no calls active. Is it a problem with my isdn line, or * ? [Mar 15 11:36:18] ERROR[29161]: chan_dahdi.c:8735 dahdi_pri_error: ACK received for '0' outside of window of '39' to '40', restarting [Mar 15 11:36:18] == Primary D-Channel on span 1 down [Mar 15 11:36:18] WARNING[29161]: chan_dahdi.c:2789 pri_find_dchan: No D-channels available!

Hi, i managed to connect to Ericsson MD110 with PRI at last. And made a successful call thru asterisk to ericsson. But when i try to call from ericsson to asterisk i got an error on asterisk side. And i couldnt figure out why. Here's my extensions.conf about incoming calls. [DID_span_1] include = DID_span_1_timeinterval_all,${timeinterval_all} DID_span_1_timeinterval_all] exten =

Hi, i know i am asking a lot of questions lately in this forum..sorry about that first of all. :) Ok, here is the deal.. I am trying to make a hybrid system with an ericsson MD110 and asterisk. Internally we have 4 digit phone extensions on ericsson.. and so in asterisk. So, what i want to do is to call pbx side without adding 9 or etc to the begining of the number from asterisk clients.. For

Hello, I just tried to upgrade to 1.6.1.0 from 1.6.0.9 and i had problems in registering users. As i see from debug it successfully reads from users.conf but later,when a user tries to logon it say peer not found.... And there were an error msg about mysql about the username field..Smthing changed in mysql tables??? Now i downgraded to 1.6.0.9 again and everything is working..

Hello, I have a default installation of asterisk 1.6.1.9-2 When i create a user in users.conf via asterisk-gui, calls, voicemail etc works. But if i create a user realtime (and my realtime caching is available too) i can see the realtime user with sip show peers. But, my local dial rules does not work. I can call from realtime user to static users(the ones in users.conf) and if they are not

Hi, I'm getting the following error from an asterisk 1.6.0.9 installation: [May 20 06:07:18] ERROR[18517]: chan_dahdi.c:10515 dahdi_pri_error: Asked to delete sched id -1??? [May 20 06:07:18] ERROR[18517]: chan_dahdi.c:10515 dahdi_pri_error: No more room in scheduler This repeats a few times, then asterisk crashes. I can't seem to locate any info on this error at all. I'm using

Hi all, So, we reverted the LibPRI version and tested it, and then tried with the latest version of everything. Still no changes. The BRI line is in PTMP. If we set the configs to PTMP in the genconf_parameters and try it, we get the following: [Jan 21 17:32:20] ERROR[20341]: chan_dahdi.c:12645 dahdi_pri_error: Unable to receive TEI from network! If we set it to PTP (which it is not) we

Hi, For a significant time now (since about 0.2.0-rc8n) the qozap driver has become very verbose if an ISDN line is not connected... I get the messages below every couple of seconds in the asterisk logs. The "flaw" in the messages is the "Alarm cleared" message - The alarm cannot possibly be cleared because there is no physical media connected into that port!!! (BTW - All

Hi all, Last night I went to replace an Asterisk 1.4 + mISDN + b410p box with Asterisk 1.6.2 and DAHDI BRI - to no avail. I had two servers so copied network setting etc from the working one, moved the card across, ran dahdi_genconf etc and it didn't work. Here's the console output with notices disabled: lucas*CLI> pri intense debug span 1 Enabled debugging on span 1 [Dec 16

I am using Ubuntu 10.04 LTS and the wine1.3 ppa (https://launchpad.net/~ubuntu-wine/+archive/ppa). I upgraded this morning using the normal update manager, and I went to run Photoshop CS5 which has been working flawlessly for months, it broke. According to /var/log/apt/term.log I updated from wine1.3.26 to wine1.3.28. I get this error: Code: wine: Call from 0x7b83b332 to unimplemented function

HI, I'm using asterisk-1.4.24, dahdi-linux-complete-2.4.0+2.4.0 and libpri-1.4.11.4 When dial, when 492131 answer, in console appear some error messages -- AGI Script Executing Application: (DIAL) Options: (DAHDI/g1/492131|60) -- Requested transfer capability: 0x00 - SPEECH -- Called g1/492131 [Dec 4 11:15:59] WARNING[7669]: chan_dahdi.c:1776 dahdi_enable_ec: Unable to enable

I'm running 1.8.2 rc1 on a Centos box with dahdi-linux-complete 2.4, using the wct4xxp module. All operations appear normal however I noticed an error repeating occasionally on the console. [Jan 10 13:53:05] ERROR[6906]: chan_dahdi.c:13691 dahdi_pri_error: 1 ROSE RETURN ERROR: [Jan 10 13:53:05] ERROR[6906]: chan_dahdi.c:13691 dahdi_pri_error: 1 INVOKE ID: 11 [Jan 10 13:53:05] ERROR[6906]:

Dear Customer Support, i connected the asterisk to a e1 interface of our hipath4000. outgoing calls from a sip peer of my asterisk to an up0 telephone which iss connected to the hipath4000 are working. If you want to dial from an up0 device to the e1 interface where asterisk is connected to, you have to use the prefix 83. But when you enter the 3rd cipher this error appears at the cli

Hi all, I?ve ran into a problem regarding D-channels. I have setup Asterisk (CVS-HEAD-03/21/05-16:41:57) on RH Fedora Core 3(2.6.10-1.770_FC3) I also have a digium wcte11xp card for connetivity to the PSTN(E1). When I start zttool i see that Current Alarms changes between Recovering and Blue Alarm/Recovering. I started to see these problems after i moved the digiumcard from one PCI slot to

I' m trying to run portable Photoshop CS5 under wine 1.3.24. Terminak output shows: [/code] dem at gateway ~/Adobe Photoshop CS5 v12.0.3 Lite Portable $ wine Photoshop.exe fixme:file:read_directory_getdents not enough room 1024/1 for fake . and .. entries fixme:file:read_directory_getdents not enough room 1024/1 for fake . and .. entries dem at gateway ~/Adobe Photoshop CS5 v12.0.3 Lite

Hi, I have a B410P card with span ports set up as span=3,1,0,CCS,AMI span=4,2,0,CCS,AMI span=5,3,0,CCS,AMI signalling = bri_cpe switchtype = euroisdn layer1_presence = ignore However, I keep getting these messages over and over again: [Dec 14 18:53:14] WARNING[22476]: sig_pri.c:1150 pri_find_dchan: Span 3: D-channel is down! == Primary D-Channel on span 3 up == Primary D-Channel on span 4