similar to: Registration of 'cstore' rejected: 'Registration Refused' from: '62.213.196.38'

Hallo Did you allow udp outgoing on 4569 as well.. i found udp bit different than tcp when comming to firewalls liaan ----- Original Message ----- From: "Bartosz Wegrzyn - asterisk" <junk@lexon.ws> To: <timebandit001@gmail.com>; "Asterisk Users Mailing List - Non-Commercial Discussion" <asterisk-users@lists.digium.com> Sent: Monday, February 21, 2005 12:29

This may not strictly be an asterisk question, but not sure where else to post ... I have an Asterisk test server setup with two firefly clients, one on the local lan and one on an external ip address. Both clients are setup the same way and voice calls work fine. The asterisk console reports a "Registered" message for the external client at about one minute intervals but the

Hello list, my CLI is spammed with : [Sep 13 08:31:38] > doing dnsmgr_lookup for 'ssw6.itsp.tld' [Sep 13 08:31:38] > doing dnsmgr_lookup for 'ssw6.itsp.tld' [Sep 13 08:31:47] > doing dnsmgr_lookup for 'ssw4.itsp.tld' [Sep 13 08:31:48] > doing dnsmgr_lookup for 'ssw4.itsp.tld' [Sep 13 08:31:49] > doing dnsmgr_lookup for 'ssw4.itsp.tld' [Sep

Hopefully this is really a generic question about IAX and doesn't turn out to be something specific to Teliax, because they haven't been too helpful so far. All they can tell me is that my login shows "status unknown" on their end, which prevents me from receiving inbound calls on my Teliax number. Outbound calls through the same server work fine, which rules out most networking

I just jumped to asterisk-1.6.1.8 and I calls will not go through to my asterisk. Same setup with asterisk-1.4 and calls get accepted. sip show registry (asterisk-1.6): Host dnsmgr Username Refresh State sip.actio.pl:5060 N 4589835 105 Registered sip show registry (asterisk-1.4): Host Username Refresh State sip.actio.pl:5060 4589835

Hello list, I'm having DTMF-troubles with a Snom phone. I want to know if it's the Snom or Asterisk that makes the trouble. I'm playing a prompt, then make a choice for "2" : [Jan 5 17:06:38] VERBOSE[29172] file.c: [Jan 5 17:06:38] -- <SIP/test1-00000701> Playing '/var/lib/asterisk/sounds/vprompts/109001/prompt5040.slin' (language 'nl') [Jan

I'm starting to get this to work! Well I got Voice Mail to work! All calls goes to voice mail without ringing the users phone (iaxComm). Here is my iax.conf and my extensions.conf Any help would be great!! Thanks -------------- next part -------------- A non-text attachment was scrubbed... Name: extensions.conf Type: application/octet-stream Size: 1039 bytes Desc: extensions.conf Url :

Hi, I created an iaxtel account, and was given a password containing an "@" character. The directory pages imply that they change the web login password only. How do I reset my IAX password so that it is usable in the iax.conf file? Thanks, Steve

Hi, I have trouble getting MOH to work after an upgrade from asterisk 1.4 to 1.6.1.4. The call goes on hold, MOH is started, and then stops right away. Here are the files both of type .raw: Tsunami*CLI> moh show files Class: default File: /etc/asterisk/musiconhold/Fr?d?ric Chopin - Polonaises Op. 40-2 File: /etc/asterisk/musiconhold/Fr?d?ric Chopin - Polonaises Op. 40-1 These files

On the asterisk1 I got this: register => username:secret@ipaddress2 [eop] username=username secret=secret type=peer host=ipaddress1 auth=md5 on the second box I got this this host is ipaddress2 [incommingiax2] username=username type=user secret=secret host=dynamic context=from-internal-custom auth=md5 on first host 1 am getting: Jun 22 14:42:10 NOTICE[2398]: chan_iax2.c:7411

Hi everyone, THis is my second thread regarding the issue.(before I was having problems with accessing my email, which slow down my responses, sorry for that) My setup looks like this Firewall | | Asterisk---Asterisk (two asterisk servers with the same setup for high avail) | | phones Ports 5060, 10000-20000, 4569, 5036 are forwared to 192.168.1.251 which is virtual ip address on one of the

iax2 debug is giving following messages repeatedly. Tx-Frame Retry[003] -- OSeqno: 000 ISeqno: 000 Type: IAX Subclass: REGREQ Timestamp: 00001ms SCall: 00010 DCall: 00000 [xxx.xxx.157.230:4569] USERNAME : XXX9072835 REFRESH : 60 Tx-Frame Retry[002] -- OSeqno: 002 ISeqno: 000 Type: IAX Subclass: PING Timestamp: 20001ms SCall: 00006 DCall: 00000

Hello Everyone, I am trying to diagnose issue with my IAX2 extension not working. When I have iax2 set debug on all I see is this: *Rx-Frame Retry[ No] -- OSeqno: 000 ISeqno: 000 Type: IAX Subclass: REGREQ * * Timestamp: 00003ms SCall: 00130 DCall: 00000 [64.229.229.111:64823]* * USERNAME : 100* * REFRESH : 60* * * *Rx-Frame Retry[ No] -- OSeqno: 001 ISeqno: 001 Type:

Is there any documentation on IAX RSA authentication because I followed http://www.voip-info.org/wiki/index.php?page=Asterisk+iax+rsa+auth and it's not working... Asterisk 1 : -r--r--r-- 1 root root 272 Aug 25 10:34 server2.pub -r-------- 1 root root 963 Aug 24 19:38 server1.key Asterisk 2 : -r-------- 1 root root 963 Aug 24 19:53 server2.key -r--r--r-- 1 root root 272 Aug 25 09:02

Hi, all I am still battling to connect * and voipbuster. What protocol does it use? Ethereal capture shows UDP traffic, but no SIP or IAX traffic when using their client. VoipBuster client connects to connectionserver.voipbuster.com on port 11112 for authentication. Call itself is placed on different server. I have tried to connect using SIP and IAX and it seems that no authentication is

I had a working 1.0.9 asterisk installation and tried to get a Firefly IAX phone to register, but it was failing. I upgraded to asterisk 1.2.5 and the PBX is working fine, but the IAX phone still won't connect. Below is my iax.conf and the output from setting iax2 debug while the phone tries to connect. Could somebody please give me some pointers? This doesn't seem to be a normal

hi, i want to call PC2PC between to IAX client without authentication i want to allow every user to use PC2PC no any password required. Please let me know what i have need to do in IAX.conf or any other file to allow any user to call Pc2Pc. My IAX.conf [guest] type=user context=default callerid="Guest IAX User" My extensions.conf [default]

I am using 1.8.3 and changed enable=no on dnsmgr.conf - however I am still getting log messages for dnsmgr_lookup. I wasnt expecting that. I have a server and a couple dedicated machines just running ALSA connections. I dont need any dns lookups for anything - who do I disable it? Thanks jerry ------------ Asterisk Ready. *CLI> *CLI> > doing dnsmgr_lookup for 'mndemo'

hi, i want to call PC2PC between to IAX client without authentication i want to allow every user to use PC2PC no any password required. Please let me know what i have need to do in IAX.conf or any other file to allow any user to call Pc2Pc. My IAX.conf [guest] type=user context=default callerid="Guest IAX User" My extensions.conf [default] exten=>_.,1,Dial(IAX2/${EXTEN})

Ever since upgrading to 1.6 I get messages like these. I want everything else that shows up, but is there a way to make all the dns messages go away? Ira > doing dnsmgr_lookup for 'gw5.telasip.com' > doing dnsmgr_lookup for 'sipconnect.ipcomms.net' > doing dnsmgr_lookup for 'proxy.ideasip.com' > ast_get_srv: SRV lookup for