similar to: duration of rfc2833 generated dtmf

Hi, We are running 1.4.22 and have been experiencing problems with certain IVRs and DTMF Tone duration. We would like to be able to increase DTMF Tone duration by 50 to 100ms over what the user is pressing on his phone. We have a PRI test circuit and an analyer in between to measure tone duration. We have tried setting chan_dahdi.conf parameter 'toneduration', but that does not do

I am using viatalk as my voip provider and they use dtmf=rfc2833, but asterisk is not seeing any of the dtmf. I am using CVShead as of 8/26/05. Nothing in the logs indicates a dtmf is being seen. If I use my pots line it sees it fine. Any assistance would be appreciated. -- Your life is like a penny. You're going to lose it. The question is: How do you spend it? John Covici

Hi. I am having problems with asterisk detection dtmf properly in asterisk 11. I am up to rev 390229. Now, when coming in off a did we have with Velocity, the dids work fine, but from extensions often it misses digits -- I can type *4 and it will miss the 4. Often, if I type quite slowly things will work properly. All dtmf modes are set to rfc2833. Strangely enough, I did not notice this with

> I have seen the following effect in Asterisk, though: where > it converts > an inband DTMF (eg coming off a Zap channel) into an > indication, it mutes > the audio where that tone is. But sometimes it leaves a > teeny bit of the > tone behind. > > If you take such a call over say IAX to somewhere and then > back out a Zap > channel, you end up with the

Thank you, very interesting! As I understand the Digium card is used as a interrupt source for Asterisk? Is there a diagnostic tool available ? Anybody else experienced a simmialr problem? Thank you! HB > From: > covici at ccs.covici.com > Date: > Sat, 12 Dec 2009 19:04:23 -0500 > To: > Asterisk Users Mailing List - Non-Commercial Discussion <asterisk-users at

Hi. I am having a strange problem when using the 1.4 version of asterisk and zaptel. If I call from a pstn line into the asterisk box using a phone number which calls the box via sip, then once I am in the meetme conference nothing happens when I hit the star key -- I cannot get the user menu. There is nothing in the logs at all its as though asterisk never sees the digit at all. Now if I do

Hi. I have been using asterisk-1.6.2 and if I update the version -- using svn -- to around May 19 or after, when I dial a digit on my fxs port which is on an X400p card, asterisk seg faults. If I go back before about this date, this problem does not occur. The dahdi version is svn 7445. Any ideas would be appreciated. -- Your life is like a penny. You're going to lose it. The question

Hello, I installed Asterisk 1.6.2.17.3 ( latest as of yesterday ) and had multiple problems with DTMF. I have two machines, we'll call them asterisk and asterisk-pri. Asterisk does IVR and asterisk-pri has a PRI card in it and connects to the PSTN. The two servers communicate via SIP with RFC2833. I setup logger.conf on both machines to display DTMF to the console. Both are built from

Skipped content of type multipart/alternative-------------- next part -------------- A non-text attachment was scrubbed... Name: Max Glucksmann (Fax del trabajo).vcf Type: text/x-vcard Size: 617 bytes Desc: not available Url : http://lists.digium.com/pipermail/asterisk-users/attachments/20060118/b1b5e895/MaxGlucksmannFaxdeltrabajo.vcf

Hi, I am using asterisk 1.4.17 which is connected to a SIP trunk supporting rfc2833 dtmf events. Asterisk stays in the media path. In sip.conf I have set dtmfmode=rfc2833 for the outbound sip proxy (SIP Trunk account) and for SIP clients I have set dtmfmode=info. So when I make a call to a cell number using the sip trunk and then press digits I can see the 2833 dtmf events coming to asterisk

Hi, In testing the Budgetone we have noticed something strange with DTMF and Voicemail. When we set the Budgetone for RFC2833, and connect to voicemail, the detected DTMF digits do not correspond with what we pressed on the phone. For example user=1001, password=1001 is detected as: Incorrect password '1111000000111' for user '111000000111' (context = <any>) Any idea

Using FireFly, all other codecs but G711 Ulaw is selected. But whenever I place a call, I get: Jan 24 16:07:06 WARNING[30654495]: dsp.c:1468 ast_dsp_process: Inband DTMF is not supported on codec G.711 u-law. Use RFC2833 Umm, wtf? I thought Inband was ONLY supported on G.711 u-law. -------------- next part -------------- An HTML attachment was scrubbed... URL:

OK, using zaptel 1.4 and asterisk 1.4 rev 6745, if someone types an asterisk from the other end of a call, I here it forever till the call hangs up. Looks like it starts the vldtmf, but never ends it from the logs. I am using Digium 400P rev I with one fxs and one fxo module. Any way around this one? Thanks. -- Your life is like a penny. You're going to lose it. The question is: How

We are experiencing intermittent DTMF problems here, with the following setup: ITSP -> PIX -> Asterisk (g729, RFC2833 for DTMF). I am running Ubuntu server 10.04, but Asterisk is compiled by us and not installed from the software repository. Essentially, DTMF works for some time, but at some point it simply stops and the point at which it stops appears to be random. Using RTP debug, I

Hello mailing list, I have been porting one of my Asterisk boxes to 1.4 and I have encountered a nasty DTMF problem. What happens is someone might come in to my IVR and enter "12345" and what will actually come through could be along the lines of "12234445". Sometimes it works, sometimes it doesn't. I had this problem with 1.2 back in November but was able to solve it

Rowland penny <rpenny at samba.org> wrote: > On 29/12/15 13:59, covici at ccs.covici.com wrote: > > Hi. I am having problems accessing subdirectories on a samba share. I > > am using windows 10 build 10586 and linux kernel 4.1.15-gentoo and samba > > 4.2.7. I have two shares, one called audio and the other called > > myshare. I cannot access the subdirectories

Hi, We have few systems with asterisk 1.4.22.1 and we use sip trunking for them not PRI's, one of our system is giving a problem of dtmf (rfc2833), like when we dial the number that have IVR and enter the extension or access code, it some time takes it and some times does'nt recognize the digits dialled. We also tried auto and info for dtmf but could not get the dtmf to work reliably, can

Rowland penny <rpenny at samba.org> wrote: > On 29/12/15 15:44, covici at ccs.covici.com wrote: > > Rowland penny <rpenny at samba.org> wrote: > > > >> On 29/12/15 13:59, covici at ccs.covici.com wrote: > >>> Hi. I am having problems accessing subdirectories on a samba share. I > >>> am using windows 10 build 10586 and linux kernel

Oh, I forgot to mention that Asterisk 15 went End-Of-Life last Thursday. :) You should use Asterisk 16. On Mon, Oct 7, 2019 at 5:58 AM George Joseph <gjoseph at digium.com> wrote: > > > On Fri, Oct 4, 2019 at 1:19 PM John Covici <covici at ccs.covici.com> wrote: > >> Hi. I am trying to install asterisk 15.7.4 from git onto a Debian 10 >> system and I am

Hi. I am having problems accessing subdirectories on a samba share. I am using windows 10 build 10586 and linux kernel 4.1.15-gentoo and samba 4.2.7. I have two shares, one called audio and the other called myshare. I cannot access the subdirectories in the myshare share. Here are the definitions. [myshare] comment = root directory path = / #fake oplocks = yes writable = yes printable =