similar to: __ast_read: ast_read() called with no recorded file descriptor

hi,all i have just set up asterisk 1.6.0.7 rc1 with spandsp 0.0.5 pre4 to ReceiveFAX, link to a E1 (DE410P) using dahdi this can receive the fax from E1 successfully, but i see many error message in the log like this: [Mar 16 09:24:38] ERROR[23540] channel.c: ast_read() called with no recorded file descriptor. when i receive a 5 pages fax, i will see this error message over 200 lines..... it

Hello, We have been working with the ReceiveFax application for some weeks now in order to receive faxes in T.38 and it works fairly well, but there are some faxes that for some reason we are not able to receive correctly. The asterisk version we are using is 1.6.0.6 with spandsp-0.0.5pre4 and the asterisk machine is behind a CISCO mediaGW to be able to communicate with the PSTN. The SIP call

Hi folks, I am having a small problem with asterisk-1.6.2.7 + app_fax on OpenBSD 4.7 -release. Everything seems to work fine. I have a macro which answers, receives the fax to a tiff, and then runs a script (mailfax) to convert that to pdf and email it. It all works perfectly except for some errors I am seeing in the console. After it hangs up I get a dozen or so messages in the cli

For our internal fax machines, I'm checking if the faxes are going to branch offices. If they are, I want to capture and email them to the branches. I've set up extension 8447 to test this. A fax machines is connected via an SPA 2102 on 173. Any calls from 173 are sent to: [outbound-fax] exten => 8447,1,Answer() exten => 8447,n,GoSub(Capture-Fax,s,1) exten

Morning, Have some questions regarding receiving and sending faxes... 1:st example: exten => 101,1,Answer() exten => 101,2,Wait(3) exten => 101,3,ReceiveFAX(/var/spool/asterisk/tmp/fax.tiff) exten => 101,4,System(tiff2pdf -p A4 /var/spool/asterisk/tmp/fax.tiff > /var/spool/asterisk/tmp/fax.pdf) exten => 101,5,System(mutt -s 'New FAX for you sir' -a

Hi all, I've got a perl agi script that exec()'s the FFA version of receivefax to... receive a fax. However, after the fax is received, the script seems to die. This is what I have: $main::agi->exec("receivefax","/tmp/${$}.tiff|fs"); $main::agi->verbose("FAX COMPLETE",1); I never see the "FAX COMPLETE" message on the console, I've set

Hello users, Recently i have installed the free version of FaxForAsterisk and trying to work with it by sending a fax on T38. My version information is as follows i)Asterisk 1.6.0.20 ii)res_fax-1.6.0.14_1.1.6-x86_32 iii)res_fax_digium-1.6.0.14_1.1.6-i686_32 sip.conf [general] t38pt_udptl=yes extensions.conf [default] exten => _XXXXXXXXXX,1,NoOp(Fax Incoming Call) exten =>

We're having an issue where we call ReceiveFax in a context that includes a hangup extension and half the time dialplan execution doesn't continue after the fax is received successfully. Am I missing something simple here? Below is a sample call where this happened: The last log line for this channel/call is: [Feb 21 09:10:53] VERBOSE[13730] res_fax_digium.c: -- Channel

Hello, I have a noticed strange behavior in Asterisk 1.6.18.2 with ReceiveFax Digium FAX Driver: 1.6.2.0_1.3.0 (optimized for i686_32). I use a context [capi-in] for icoming ISDN calls: ====== [capi-in] ; Faxe fuer Ruben exten => 12345,1,Macro(faxin,ruben.roegels at jumping-frog.org,${EXTEN}) ====== My macro for the fax receiving looks like that: ====== [macro-faxin] ; Faxe ; ARG1 =

Hello, I've got an analog phone which is currently receiving unsollicited FAX calls from PSTN. For learning purpose, I'm preparing an Asterisk/SPA3102 setup that would let voice calls come in and out and translate incoming FAX calls to TIF files (forwarded through email)). My target setup is : PSTN <-- analog--> SPA3102 Line Port <-- SIP --> Asterisk <-- SIP -->

Hi all, I am running to the following problem, when using the below dialplan to receive fax, everything works perfect till this line exten => receive,n,ReceiveFAX(${FAXFILE}): and then the following line cannot be executed, it's like asterisk can't go back to dialplan and continue, the good news is when i check what is received in my fax folder i find that the file is a valid one (not

Hi! Have probably not understand how fax is working in Asterisk 1.6. I did install: ptlib-v1_12_0 h323plus-v1_19_7 dahdi-linux-complete-2.2.0.2+2.2.0 spandsp-0.0.5 asterisk-1.6.2 asterisk-addons-1.6.2 make menuselect in asterisk-1.6.2 source directory shows: [*] app_fax But "core show applications" doesnt show me any "fax applications" and when I try to receive a fax:

Hi all, I realize that the application Receivefax can't handle with more than one fax at the same time. In a environment with a lot of fax, some caller get the signal but the operation can't be completed. Is there a way to send busy tone to the second caller? Att, Flavio Roberto Miranda MSN:flaviormiranda at hotmail.com Skype: flaviormiranda -------------- next part

Hi, I'm sending twice the same file using Hylafax's sendfax app. The first time I'm "dialing" a DID attached to the ReceiveFAX application. The second time I'm dialing an internal extension attached to the same ReceiveFAX application : 1. sendfax/hylafax/iaxmodem ----> asterisk ----> dadhi ----> dahdi ----> asterisk ----> spandsp 2.

Hi, I'm configuring a system so that end user can receive phone and calls using the same extension and DID. At the moment, fax are correctly detected but I'm trying to improve end user experience. Relevant dialplan (from extensions.ael) is : fax => { Verbose(0,Incoming fax from ${CALLERID(num)});

To provide a reliable fax solution for users connected to a Asterisk 1.6.2.6 server i have tested a few T.38 capable ATA's: - Patton M-ATA - Grandstream HandyTone 486 - Fritz!Box 7170 I have tried Asterisk 1.6.2.6 compiled with SpanDSP-0.0.6pre17 and also Asterisk 1.6.2.6 with Fax for Asterisk installed. These Asterisk servers are connected to a Cisco PGW 2200 + AS5400XM. Sending fax

Hi all, It looks like people commonly use this kind of dialplan when receiving faxes on Asterisk, with a jump to extension fax during the Wait() if a fax tone is detected: [start-here] exten => _X.,1,Answer() exten => _X.,n,Wait(n) exten => _X.,n,...do stuff... exten => _X.,n,Hangup() exten => fax,1,Goto(fax-rx,receive,1) [fax-rx] exten => receive,1,... exten =>

Using spandsp-0.0.6-pre17, SendFax on 1.6.1.18 and ReceiveFax on 1.6.2.8. Sip.conf on both sides has t38pt_udptl = yes. -- Executing [s at fax-tx-test:3] SendFAX("SIP/side-sip-00000009", "/var/spool/asterisk/fax/20091113_1455.tif") in new stack [Mar 20 17:05:34] WARNING[6433]: app_fax.c:178 phase_e_handler: Error transmitting fax. result=49: The call dropped

Is it possible to force T38 for all invocations ReceiveFAX() ? Receiving fax always worked OK on Callweaver though I could put SipT38Switchover() into the dial plan. I can't with Digium fax, and it always fails at the point it decides to switch to T38.

hi, today i upgraded from asterisk 1.4.21 to 1.6.2.9 (i know this release is not supported anymore, please don't tell me to upgrade). unfortunately now i can't use the rxfax() application anymore. i tried to use ReceiveFAX() the way i used to use rxfax() (multiple dedicated fax extensions getting their faxes from isdn via zaptel/dahdi), but this doesn't work. either fax