similar to: HW-Recommendation: cell/mobile phone, capable of WLAN and SIP ??

Someone can help me? I tried several things and always don't converge # Model library(sem) dados40.cov <- cov(dados40,method="spearman") model.dados40 <- specify.model() F1 -> Item11, lam11, NA F1 -> Item31, lam31, NA F1 -> Item36, lam36, NA F1 -> Item54, lam54, NA F1 -> Item63, lam63, NA F1 -> Item65, lam55, NA F1 -> Item67, lam67, NA F1 ->

Anyone using Nokia "E" Series handsets with Asterisk? I'm trying to deploy some e71's and am having an issue. I can get a single handset working, but when I try to create a SIP profile on the second phone, it won't allow me to save the profile, saying that devices in the same "realm" must have identical username and password. Anyone have a workaround for this

Hallo, can I use pxelinux for booting a notebook via WLAN? Viele Gruesse! Helmut

Hi! I have some problems with an bridge between wlan0 and eth0 device... It works and I can from both sides ping the router with the bridge device but I cant ping the devices from other net so I cant ping wlan devs from eth net and other way around the wlan card is an atmel usbw11 from linksys and eth is a intel e100 10/100mbit nic I have configured the bridge according to the how to and

Hi list, I bought two UTStarcom F1000 phones, pre-equipped with the latest firmware, including WPA support. Those are configured to register to an asterisk server on the internet (not LAN), and registration works. Calling and being called also, with transfer and all bells and whistles. After a few minutes up to 5 hours (varies widely), the display tells me that an Accesspoint is not available

Hi i want to Buy Nokia E series Phone which have InBulit SIP-VOIP Calling client so i can make VOIP calls thru that phone. Aslo that Phone easly able to register with Asterisk Pbx to recive inter-office calls. i try to search from web & also from Nokia site but they only mention this features as "VOIP call from wifi" they mentioed only this much info. they not mentioed info about

hi list members, my goal is to make one of my DomU''s act as a wireless accesspoint... So, i need it to have access to the pcmcia wlan card attached to dom0. But how ? when i give the pci=[] option to the domU config file its shows up with lspci but i cant use it... (on debian with module-assistent get rt2x00 in de DomU) Is it possible or would it be better to use a more direct interface

I intend to realize the connection to the Internet by WLAN (at the presen time DSL cable modem). The WLAN DSL-Router should not be the problem. But which wlan- adapter (internally (PCI), USB... whatever) can be recommended for a work "out of is the box" with cent OS 5? Thx Timothy

Hi folks! First post here, so please don't bother if it's not the right place to post those kind of questions. I'm currently running a 4.7-release (upgrade to 4.8 planned but not yet started) on my production box. As I would like to setup a small WLAN (major use for my notebook, other clients are possible) I need to know which cards are really supported. The handbook is IMHO not

Hi all, I run an Asterisk 1.4.24.1 and face problem with DTMF. When calling from my mobile phone -Nokia E65- in GSM, Asterisk present me a second tone so I can use the GW. For this I use: exten => s,1,NoOp(One of our workers (${CALLERID(number)}) is calling office) ;callerID is the one of the calling mobile phone exten => s,n,Background(silence/1) ; Nokia E65 send digits in

It would be very nice to know about some good success without too much cpu issues on Nokia devices, i tried pjsip.org project on S60 FP1 E65 +200mhz ARM cpu with speex but don't had much luck in using it without having 100% cpu usage :( Please let us to know about your testing E65 CPU: http://www.nokia-tuning.net/index.php?s=processor Fabio Pietrosanti Jordan Dimov wrote: > Thank

Hi, I?ve been following some information about the latest chan_sccp drivers for a few weeks. I installed and tried about any variant of driver that exists in the chan_sccp system. Despite a few little changes in the CLI options I am still encountering a lot of problems with the phone. When not using the phone for a while, it "disconnects" from asterisk (1.0.7) after a few hours

Hey folks, I am trying to get an E65 to connect to asterisk, and I would really appreciate a second set of eyes. The SIP dialog completes fine, but the phone subsequently says "Registration failed". I am in a network that has what seems to be a SIP-capable NAT gateway, but the asterisk is configured nat=yes anyway. Using a softphone (twinkle), I can connect just fine, SIP and RTP work.

How to search after wlans using command prompt I have no gui

Quoting "Fabio Pietrosanti (naif)" <lists at infosecurity.ch>: > Speex it's too cpu expensive for general S60 usage, it would require a > lot of ASM optimization. Did a quick search and saw ARM CPUs with speeds above 100 MHz. That should actually be enough for Speex, at least for narrowband. > If you are using CSD, like for a secure telephony solution >

Not strictly asterisk related, however... Here's an odd one for you.. I got a Nokia E90 and setup it's SIP client which runs via Wi-Fi (anyone know if I can make it work via GPRS/3G?) Anyway, in a fit of idleness, I thought I'd see what codecs it supports, as I couldn't find it in the manual... And it supports: ilbc g729 ulaw/alaw No GSM! How odd is that, given

Hi All, After hours of reading and trials, I got the following setup working... 1. Dell Axim X30 PocketPC with 802.11b wireless using DHCP with Open WEP -- successfully connected to --> 2. Laptop with DLink Airplus DWL-650+ PCMCIA wireless with ndiswrapper v1.1 driver with network bridge (wired + wireless) and running a DHCP server listening on interface br0 (eth0 + wlan0) Here is the

Greetings, This is my fist time posting to a mailing list. For the past few days I have been trying to mimic my former windows workstation with a centos 6.3 workstation at work. I have gotten really far but am now facing an issue I cant seem to solve on my own. My former workstation had vmware for running my virtual machines. Most of the time I would run just two virtual machines, but sometimes

Hello, I'd like to add rules (level workstation) for ignoring wlan reconnects/disconnects. The rules would ignore messages like this: May 12 11:02:16 t400 kernel: [13254.204101] No probe response from AP <MAC> after 500ms, disconnecting. May 12 11:02:16 t400 kernel: [13254.213029] cfg80211: Calling CRDA to update world regulatory domain May 12 11:02:16 t400 wpa_supplicant[3277]:

Is network manager available during Gnome login? Users (using laptops etc) need to authenticate and login having their home directory on NFS using autofs. However this is not possible when there is no valid network connection present; either using Wireless LAN or VPN