similar to: Unrecognized prilocaldialplan error when dialing a SIP call to a PRI trunk

Only a warning, and doesn't seem to do anything bad. But I can't seem to figure out what these warnings mean? -- Requested transfer capability: 0x00 - SPEECH [Feb 17 12:33:03] WARNING[10750]: chan_dahdi.c:3096 dahdi_call: Unrecognized prilocaldialplan NPI modifier: k [Feb 17 12:33:03] WARNING[10750]: chan_dahdi.c:3096 dahdi_call: Unrecognized prilocaldialplan NPI modifier: o [Feb 17

Hi, I'm having strange warning from asterisk when I try to dial GSM Gateway: -- Executing [1011501522xxx at sm:1] NoCDR("SIP/ibm-b2c52848", "") in new stack -- Executing [1011501522xxx at gsm:2] Dial("SIP/ibm-b2c52848", "Zap/R3/501522xxx") in new stack -- Requested transfer capability: 0x00 - SPEECH [Jul 13 11:58:50] WARNING[18208]:

Hi all, I've been batting my head against a brick wall for the best part of the day and still haven't got any further (apart from getting a big headache, that is). I've searched the Wiki and Googled the hours away, but I still can't find supportive documentation. I've just replaced my ISDN Fritz!/chan_capi setup with a HFC/Zap configuration and had the following problems: 1

Starting playing with asterisk 1.6.1.0 i found the following problems: In the cdr_pgsql, the sql statement is wrong: 2009-06-25 12:17:01 COT LOG: statement: INSERT INTO cdr

-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 Hi, Can someone explain what the parameters pridialplan and prilocaldialplan are? What do they do and do I need them? I've connected an asterisk box via E1 (sangoma) to an alcatel 4200 pbx. The pbx technican complains about the format of the nr asterisk sends. Asterisk sends all numbers in on piece the pbx expects the numbers devided into

Hi list! What exactly is the meaning / function of the pridialplan & prilocaldialplan? I've been trying to find out what the different possibilities for these settings are but couldn't find a clear answer. The possible parameters I could find are are : local,unknown,dynamic,national,international and maybe there are more? Thanks!

I have a PRI connected to a traditional PBX using NI-2 and a typical config (further below). When I call from a SIP/IAX phone to an extension on the PBX, only the number makes it through. If I plug that same port on the PBX to a carrier the PBX presents both name and number. Hints or pokes to relevant chapters in documentation? My config is essentially like one found here:

Hi I'm beginner in list. I have doubts about the options pridialplan and prilocaldiaplan in chan_dahdi.conf. I interconnect the Asterisk with a Siemens PBX, but i saw that the changes in the file do not take effect in debug of the span or calling/called number. How to use this options? In that cases to use? Ps.: sorry for the english, i'm brazilian. Thanks -- Att, Rafael Saraiva

hi. could somebody explain how exactly the following parameters in zapata.conf work: pridialplan prilocaldialplan internationalprefix nationalprefix localprefix privateprefix unknownprefix the wiki & comments doesn't quite explain them. and phone companies are absolutely no help. i've setup systems in the US & China with trial & error until it works. now i'm setting up a

Hi All, This posting regarding PRI voice optimization, on dahdi 2.1.0.4. we have more than 4 machine running on 4 port PRI card with echo cancellation hardware based. i have enabled echo cancel from chan_dahdi.conf using echocancel=yes, now more than 70% of call get good voice but some of calls having issue for callquality and other voice related issues. now my question is that is there any

Hey everyone ! I have a problem in making outbound calls in PRI connection. I have E1 PRI airtel connection [ India ] [ asterisk-1.2.12.1 on CentOS 4.4 ] zaptel.conf ---------- [channels] language=en usecallerid = yes hidecallerid = no callwaiting=yes threewaycalling = yes usecallingpres=yes transfer = yes echocancel = yes echotraining = yes immediate = no ;group=0 ;context = from-pstn

Hi, I have a problem with setting outgoing caller id to "nothing" (secret) on our Wildcard TE405P connected to a swedish euroisdn line. Caller ID seems to work fine when connecting the same line to a Ericsson PBX - so something must be wrong in my settings, but I don't know what. I've tried: exten => _*70X.,1,Set(CALLERID(name)="") exten =>

Hello, I have a little problem with signalling. An E100p is connected to an Alcatel PBX, wich has an E1 to the outside. Located in Germany. zapata.conf: switchtype=euroisdn pridialplan=local prilocaldialplan=local overlapdial=yes signalling=pri_cpe .... With asterisk 1.0.2 I can call from a SIP phone to a phone connected to the Alcatel and the SIP number is correctly displayed at the caller.

Does anyone know, how I can increase the timout value for the ISDN implses, so asterisk waits for the extension on the ISDN channel? Regards, martin My zapata.conf: [trunkgroups] [channels] language=de pridialplan=local prilocaldialplan=local nationalprefix = 00 internationalprefix = 000 ; trust user provided callerid (clip no screening)? pritrustusercid = yes ; hidecallerid=no

Hi all, I really hope that you guys can help, because I've been tearing my hair out for the past 5 hours on this one. I have a Zaphfc (BRI) card in TE mode connected to the S-Bus of a Nortel Meridian phone system. Phone calls from the Nortel to say MSN 510 are correctly being sent to the right SIP phone. When asterisk dials say Zap/g2/224 (a Nortel internal extension) the call goes

I've got a bit trouble with callerid and zaphfc cards. Basically zaphfc doesn't add the "0" in front of national numbers (haven't tried a international call yet). With chan_capi that allways worked fine, however i had to define the national and international prefixes in capi.conf. Is there something similar in zapata.conf ? Here is my zapata.conf: [channels]

Hi, I'm using a Junghanns Quadbri ISDN card on some lines from the Austrian Telekom. Things are working, the only missing stuff is to add a "0" as a prefix to each incoming call, to make it possible to answer missed call lists. I'm using the 0 as the prefix for outside lines. I've experimented a little with the prefix settings in zapata.conf, but without success:

I switched PRI vendors recently, and one of my questions was "do you provide caller ID name in addition to number?" AT&T Local did not, But XO communications said they did. Before I call to complain, is there an setting to turn this on in asterisk? I want to make sure that I have my side covered before I call XO. My current zaptel.conf is: context=from-pstn switchtype=national

hi folks. i recently setup an Asterisk system in Hong Kong. their phone company told me that their T1 PRI switch type is Primary-NTT. however in chan_dahdi.conf there's no such option. i have it set to national. it worked fine for a while, but now suddenly stop working. in coming call just keep ringing and didn't even show up on console. out going call hang up immediately with cause code

Hi, Ive been playing on a asterisk to orion gsm box E1 pri setup. I have achieved incoming calls to be passed to my asterisk box successfully but outgoing calls will just I have tried playing with various pridialplan and overlapdial settings and with no success. If anyone can make more sense from the log, I'd certainly appreciate it. I am sending a 10 digit number to be dialed. I guessed