similar to: lagrq

Hi, I am getting the following messages for a few days. WARNING[10148]: chan_iax2.c:1219 __send_lagrq: I was supposed to send a LAGRQ with callno 15691, but no such call exists (and I cannot remove lagid, either). I got 2 iax trunks which used by test purposes only. And no iax clients or no calling rules thru this iax channnels so far.. So why do i keep getting that messages.

I know in advance maybe I'm overlooking something stupid, however I'm really lost and cannot find the solution... Situation: - asterisk-1.2.13 on a linux box with no iptables active. - one iax2 peer defined - one wildiax phone running on my laptop the soft phone is configured to connect & register on asterisk, however, I cannot get it working. What am I missing? Please help!!

I'm having some trouble with placing some iax calls over an openvpn: Setup A is a 1.8GHz Celeron, T100P attached to a Zhone Zplex. Setup B is a 266MHz P2, T100P attached to a Zhone Zplex. Setup C is a 700MHz P3, T100P attached to an Adtran TA 750. Setup D is a 233MHz Pentium, with an X100P. Setups A and B are on the same physical network. IAX calls routed between them work fine. Setup D is

Hello, i have a simple but annoying problem. I have the following entry in /etc/asterisk/externsions.conf file: ---<Cut Here>--- exten => 10100,1,Wait(4) exten => 10100,2,Playback(transfer,noanswer) exten => 10100,3,Dial(${PHONE30},30,t) exten => 10100,4,Background(extension) exten => 10100,5,Background(is-curntly-unavail) exten => 10100,6,Voicemail(9999) exten =>

Can any one help? Thanks. we have two * servers (Version 1.2.1) and one 1.09 server. Calls between these two 1.2.1 servers have odd behavior. But call from 1.09 to 1.21 server working fine in either situations. See below pls: Local server iax.conf [tosyd] username=mel type=peer secret=xxxx host=198.168.2.66 remote server iax.conf [mel] type=user secret=xxxx host=198.168.2.67

Hi, My termination with sixtel stopped working, is it something I did or anybody else is having the same problem. I am attaching log: *CLI> -- Executing GotoIf("SIP/300-fbe0", "1?4") in new stack -- Goto (macro-dialout-default,s,4) -- Executing GotoIf("SIP/300-fbe0", "1?6") in new stack -- Goto (macro-dialout-default,s,6) -- Executing

============= SJphone Log ============ Outgoing SIP session Respondent: (sip:8612@192.168.2.2) Remote client: Started: May 26 16:33 Accepted: no Ended: May 26 16:34 End reason: Call rejected: 503 Service Unavailable =============== Asterisk Debug ================ Executing Dial("SIP/2201-a83e", "IAX2/<FWDNUMBER>:@iax2.fwdnet.net/612|60|r") in new stack --

_____ From: Cary Fitch [mailto:caryf at usawide.net] Sent: Tuesday, April 14, 2009 1:17 PM To: 'Asterisk Users Mailing List - Non-Commercial Discussion' Subject: RE: [asterisk-users] Asterisk-beginner : cannot make phone calls using Asterisk May I suggest divide and conquer? I haven't followed every detail, but it seems that your phones are not registering. Put them on

Hi, I'm testing an upgrade from 1.4.18 to 1.4.37 in a VM prior to putting it into production. Ive done this by installing 1.4.18 onto the VM, putting my config files in place and then installing 1.4.37 over the top (which is what I'd have to do on production). I've found a few issues in the config files, but nothing I couldn't handle until... I hit inbound IAX issues. My

The situation is one of my asterisk servers is behind a NAT firewall and one is not. Both servers have multiple IAX peers. The NAT firewall has port 4569 mapped through to the asterisk server behind. But, the natted server is almost permanently unreachable from this non-natted server, even though, the non-natted server is almost permanently _reachable_ from the natted server. Details are below

To answer my own message, I figured out a solution (untested) about 10 minutes after posting and leaving the office. Doh! Anyway, the solution (now tested) was to make the Asterisk server behind the NAT register with its peers. Despite reserving port 4569 in the firewall, that was not enough in this particular NAT firewall - it was only being reserved for one connection. Kind regards, Sebastian

Greetings, I have a somewhat unique (I think) configuration that I am testing involving MeetMe conferencing and have encountered a problem that I'm not quite sure how to solve. Here is a brief description of my setup for the background. I wanted to offer the ability for users to mute and unmute themselves while in a conference. If they enter a conference as monitor only, they are

Ok so it seg faults when I try to dial out through IAX(voiptalk.org), ofcourse it doesn't if I remove allow=speex :P ---- (gdb) run -c Starting program: /usr/sbin/asterisk -c [Thread debugging using libthread_db enabled] [New Thread 16384 (LWP 28283)] [New Thread 32769 (LWP 28285)] [New Thread 16386 (LWP 28286)] [Thread 16386 (LWP 28286) exited] [New Thread 32771 (LWP 28287)] Asterisk

Asterisk Project Security Advisory - ASA-2007-015 +------------------------------------------------------------------------+ | Product | Asterisk | |--------------------+---------------------------------------------------| | Summary | Remote Crash Vulnerability in IAX2 channel driver |

Asterisk Project Security Advisory - ASA-2007-015 +------------------------------------------------------------------------+ | Product | Asterisk | |--------------------+---------------------------------------------------| | Summary | Remote Crash Vulnerability in IAX2 channel driver |

For some reason, starting just today, 1 out 3 of my asterisk servers is having issues calling 1 other server. The only issue I see is that when it registers with the problem server it is using port 1027, not 4569. ie: Registered to 'Server 1', who sees us as 'Server 2':1027 Server 1 then proceeds to timeout trying to register with Server 2. The way I have each server registering

I'm new to this list, and I apologize if this is an already answered question, but my Google-fu was not strong enough to find the answer if it was. I'm having a problem with DTMF on incoming IAX calls. For the first few seconds of the call (between maybe 1 and 15, it varies from call to call) everything works fine. After that I continue get DTMF_E messages from the remote IAX server

Hi, I thought I'd repost this to the -users list for some background on the jitter buffer and its workings and remaining issue.s I'll also pu a little executive summary here at the top: Where a channel is native bridged to another iax2 channel: 1) Lag is not measured and will usually show 0ms. Any other number is an old measurement from the start of the call 2) The jitter

Hi, I created an IAX2 trunk between my old Asterisk 1.4 server (A) and my new one with v. 16.10.0 (B). The trunk seems to be up, and the calls are initiated, eg. an extension from A can dial an extension in B which rings. However, as soon as the extension in B answers, the call is terminated. This is what I see in the console of B: -- Called PJSIP/4053 -- PJSIP/4053-00000002 is ringing

hello everybody well...while trying to make gnophone to gnophone call using IAXtel's PBX server......i am not being able to establish a connetion.... possibly whats happening is, we are not being able to transmit our message packets properly and result is its not being able to establish connection n is resending frmaes again and gain here is message we are getting Tx-Frame Retry[000]