similar to: Timeout for Queue

As part of a project to move a clients Cisco phones to SIP to work with an Avaya system, I'm taking a Cisco 7961 we bought and adding it to our Asterisk setup. Now, I've gotten the firmware files from the site, the latest version is 8.4 which contains the following files: apps41.8-4-3-16.sbn cnu41.8-4-3-16.sbn cvm41sip.8-4-3-16.sbn dsp41.8-4-3-16.sbn jar41sip.8-4-3-16.sbn

Hello, I'm running three asterisk boxes, spread across three different countries. One of the offices is running Asterisk 1.2.18 on the Druid Telephony Platform(not my choice, has been in before I started and haven't had the time to remove it). My situation I have is based on the contexts already in place, particularly for outbound calls, I need to do a Goto sending the call back into the

Hi All, I'm confused! My Asterisk system has a Zap trunk and three SIP trunks. I'd like to configure the dialplan to route via the first trunk in a list and if that's not available or it's busy, fall over to the second, then to the third, etc. AIUI Dial(Zap/1&SIP/out1&SIP/out2/${EXTEN}) rings all the trunks in the list and bridges to the first to answer. Unfortunately,

Does anyone know of a way to force the voicemail password for users to be of a certain length? We've setup operator=yes within our voicemail.conf and want to have the users use a long password to prevent possible guessing by external parties. I'm not seeing any such option in my research. If it doesn't exist it might be a decent feature. Thanks. Running: 1.4.25, on CentOS 4.7

Hello, I'm supporting an Asterisk setup in the Cayman Islands(I'm in Canada), which is running a PRI to a local telecom provider. We are looking at improving the setup, setting up high availability etc. My manager is interested in putting a TDMOE device in place, so we can easily switch the line remotely. He's looking at the following device:

Hello, I've been looking into OpenSIPS to see if it's a worthwhile addition to our setup. We're currently running a cluster, using Heartbeat, between two servers. It works well but I'm interested in seeing if we can improve it. My manager heavily uses RPM's for installations rather than source, particularly using yum to update. I'm trying to actually install OpenSips via

Hello, I'm interested in knowing if anyone out there has successfully connected Asterisk to a Cisco UC 560 via SIP trunking? We have a client of ours that we put in an Asterisk install, one of their sister companies who we don't control is putting in a Cisco UC 560. From my looking I think it can be done, but the vendor is telling them it can't. Thought I'd ask around here and see

Hello, I thought to post this here before my manager starts his own coding project to give us a workaround. My situation I'm running into is as follows: 1. A call comes into our Asterisk system, it's trunked from one office to another via IAX. 2. Call enters a queue and is picked up by one of the agents. 3. That agent has to transfer the call, could be for a number of reasons the client

Hello! I have a Dockmaster from Copeland Engineering. This is a battery saver used for a laptop docking station in a police car, which has a USB port for relaying its internal timers and state. hid-generic 0003:04D8:0500.0001: hiddev0,hidraw0: USB HID v1.10 Device [Copeland Engineering, LLC Dock Master] on usb-0000:00:10.4-3.3/input0 I'm able to configure usbhid-ups, but it doesn't

Some country codes are three digits long. Some are two. e.g. UK 44 , Bermuda 441 Does anyone know a formula for determining which part of a dialled number is the country code and city code ? -------------- next part -------------- An HTML attachment was scrubbed... URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20050303/facb2a2d/attachment.htm

Thank you - I have included the capture, and attached it here. USB is new to me. I am a good sysadmin, but terrible programmer. I was able to use the usbhid-dump utility using -e stream, the last octet will report the state of the detected power (1/2 for ignition on, 3 for ignition off, 0 for powered-off). 4th one seems to be voltage, and the 5th and 6th I believe are timers:

Is it possible to configure libvirt to generate "predictable" MAC addresses for virtual NICS? (A configuration which accomplishes this by limiting the pool of available addresses would be acceptable for my use case.) Read on for why I want to do this ... I have a somewhat unusual use case. I am working with the OpenShift bare metal "IPI" installation process, which is

Does anyone have suggestions about how to produce a map of British Colonial America 1775? At that time, Great Britain had 26 colonies in the Americas, including Bermuda, several Caribbean islands, "Quebec" (extending then almost to New Orleans), Nova Scotia, Newfoundland, Belize, and the 13 that declared independence in 1776. I've reviewed the "map"

Hello, I'm having a problem logging in to the Samba domain from an XP machine. The machine is added to the domain but after reboot I can't login. I've done the signorseal registry hack but I'm still not able to login. The error I get when logging in is this: "Windows cannot connect to the domain, either because the domain controller is down or otherwise unavailable, or

On Feb 23, 2017, at 2:55 PM, Drew from Zhrodague <drewzhrodague at zhrodague.net> wrote: > > Thank you - I have included the capture, and attached it here. USB is new to me. I am a good sysadmin, but terrible programmer. > > I was able to use the usbhid-dump utility using -e stream, the last octet will report the state of the detected power (1/2 for ignition on, 3 for

I compiled samba 2.0.2 on a intel RedHat 5.2 machine successfully. I then set up the machine according to the DOMAIN_MEMBER.html instructions to join my domain. Everything seemed ok so far, i got the message: change_trust_account_password: Changed password for domain INFO. smbpasswd: Joined domain INFO So far OK, right. I set up the smb.conf like this. The options in Global that are commented

I have been using UW's IMAP server and I am converting to Dovecot for Maildir support. When a user fails authentication, or a user does not exist, it appears that the same message is used for these events. Is there a way to indicate that the user does not exist (Invalid user), and authentication Failure (Failed Password)? Clearly these two failures indicate a different error in the system.

I built some reasonably successful tools in a graphical database for reconstructing the developmental turning points for feedback loop driven natural processes. I'm trying to move it to R and am having difficulty with the very basics, i.e. a) defining time series using time as a natural number rather than a place in a table. I was also hoping b) someone might have built some of the

Hello, Several machine cannot joint the cluster after a reboot. Here is a example of the error : caserta kernel: CMAN: Join request from como.dmz.lexum.pri rejected, node ID 3 already in use by ancona.dmz.lexum.pri All cluster.conf are the same (checked with md5sum) I googled this but did find nothing Any ideas? tx

Hi Guys I'm trying to compile samba the lastest version and i keep getting this same error message. Compiling ipc.c Compiling reply.c Compiling mangle.c Compiling chgpasswd.c Compiling password.c Compiling quotas.c Compiling uid.c Compiling predict.c Compiling credentials.c Compiling clientgen.c Compiling pipes.c Compiling server.c Compiling access.c Compiling ufc.c Compiling smbpass.c cc: