similar to: chan_zap.so missing

Hi all. chan_zap not compiling, yes yes I know this sounds trivial but here me out... This morning I decided to upgrade to Asterisk 1.4.2 and Zaptel 1.4.1. I successfully installed zaptel 1.4.1 and the card is picked up and correctly configured. ztcfg shows the following: [root@zion root]# ztcfg -vv Zaptel Version: 1.4.1 Echo Canceller: MG2 Configuration ====================== Channel

Hello I've been googling for this message, but can't find why Asterisk sends a warning. The configuration files look similar to http://www.voip-info.org/wiki/index.php?page=Asterisk+config+zapata.conf.sample It's a TDM card with just one FXO module on it, and I connected an RJ11 cable to it from the wall plug: # cat /etc/zaptel.conf fxsks=1 loadzone=fr defaultzone=fr # ztcfg -vv

We use an IPcortex PABX running Asterisk 1.2.39-BRIstuffed-0.3.0-PRE-1y-y. We have recently implemented Call Queuing for our main incoming line with hold music. The call queue type is: Ring all - One call at a time (no position announcement). Since implementing this feature we've been receiving the below error daily in the mornings and lunchtime when the queue will jump to the next available

Few days back I installed Asterisk 1.4.2 with Zaptel 1.4.0. All SIP accounts were working fine, today I tried to install a fxs Sangoma A200 card and got the following error. [Apr 12 01:15:17] WARNING[31018]: channel.c:3024 ast_request: No channel type registered for 'Zap' [Apr 12 01:15:17] WARNING[31018]: app_dial.c:1090 dial_exec_full: Unable to create channel of type 'Zap'

Suddenly after recompiling my 2.4.22 kernel I can no longer load chan_zap: Sep 22 21:25:08 ERROR[16384]: File chan_zap.c, Line 5145 (mkintf): Unable to get span status: Inappropriate ioctl for device Sep 22 21:25:08 ERROR[16384]: File chan_zap.c, Line 6638 (load_module): Unable to register channel '1' Sep 22 21:25:08 WARNING[16384]: File loader.c, Line 301 (ast_load_resource):

hello all, i'm using TE110P and all configuration prosess is done. but after i do the 'modprobe' for zaptel and wcte11xp, follow by ztcfg -vv and asterisk -vvvgc i have this error. *CLI> May 27 14:44:33 WARNING[3059]: chan_zap.c:8534 pri_dchannel: PRI Error: We think we're the network, but they think they're the network, too. May 27 14:44:34 WARNING[3059]: chan_zap.c:8534

Sorry I should have stated that I've tried +x, -x, x.y and x and I still get the same. Regards Lee -----Original Message----- From: asterisk-users-bounces@lists.digium.com [mailto:asterisk-users-bounces@lists.digium.com] On Behalf Of Eric "ManxPower" Wieling Sent: 05 January 2007 08:10 To: Asterisk Users Mailing List - Non-Commercial Discussion Subject: Re: [asterisk-users]

It seems consistant after dialing dozens of times that the call that doesn't go through is the one the gets the log message "No echocancellation requested" (chan_zap.c) and the "Scheduleing timer" (channel.c) in the middle of receiving the DTMF tones. I'm now using the T400P card last week very simular problems the the T100P (although I think I was actually loosing

Update: I can reproduce the error by putting the reception phone (call queue 0) in Do Not Disturb mode, then call in from outside using a mobile, then pick up the call from the 2nd phone in the queue. It will cause the error only if I hang up _before_ the mobile hangs up. The error doesn't seem to happen if the external call hangs up, or if the call is answered by the reception phone (first

Hi All; Suddenly the zaptel channel look like stop working and it is giving me this error when I do zap restart: [May 24 19:30:21] ERROR[2772]: chan_zap.c:7219 mkintf: Unable to open channel 1: Device or resource busy here = 0, tmp->channel = 1, channel = 1 [May 24 19:30:21] ERROR[2772]: chan_zap.c:10582 build_channels: Unable to register channel '1,2' To what it could be related?

I am running Asterisk 1.2.14 and Zaptel 1.2.12 and using a Digium TE110P card in E1 mode. I've recently noticed in my logs the following Jan 5 01:27:11 VERBOSE[22490] logger.c: [chan_zap.so]Jan 5 01:27:11 VERBOSE[22490] logger.c: [chan_zap.so] => (Zapata Telephony w/PRI) Jan 5 01:27:11 VERBOSE[22490] logger.c: == Parsing '/etc/asterisk/zapata.conf': Jan 5 01:27:11

I am having trouble with chan_zap.so not loading. When I load it from modules.conf, Asterisk bails out without any error message. When I load it from the console, it just says "Unable to load module chan_zap.so" no matter what verbose level I am using. dmesg says: Zaptel Version: 1.4.4 Zaptel Echo Canceller: MG2 Freshmaker version: 73 Freshmaker passed register test Module 0:

Any ideas? 51] logger.c: [chan_zap.so] => (Zapata Telephony) Sep 28 00:42:35 VERBOSE[5151] logger.c: == Parsing '/etc/asterisk/zapata.conf': Sep 28 00:42:35 VERBOSE[5151] logger.c: == Parsing '/etc/asterisk/zapata.conf': Found Sep 28 00:42:35 VERBOSE[5151] logger.c: == Parsing '/etc/asterisk/zapata-auto.conf': Sep 28 00:42:35 VERBOSE[5151] logger.c: == Parsing

Hi, I'm trying to install asterisk on Dell power edge 2800 running Fedora core 3. I don't have have any zaptel cards, so trying to use ztdummy. /dev/zap is successfuly created... but I see some problems while starting asterisk ... chan_zap fails to load. Can somebody please help me in overcoming this problem. I was able to run asterisk on other normal PCs running Fedora core 3. Is this

Trying to use: Asterisk 1.4.2 Zaptel 1.4.0 chan_zap won't compile in asterisk 1.4.2 when used with zaptel 1.4.0. The changelog has this entry: * channels/chan_zap.c, configure, configure.ac: If we receive ZT_EVENT_REMOVED, destroy the specified channel. (issue #7256, tzafrir) Also, update the configure script to make sure that we don't try to build chan_zap

I've just finished updating my Asterisk to the CVS version. Unfortunately, chan_zap won't load anymore. The hardware has not changed and the config files have not changed. I can re-install the two packages back and forth. The old one will still work. The new one won't. I tried updating to a brand-new zaptel and wcfxo modules, with no difference. This has got to be the most

I just updated to the new CVS and now I am getting the following error from chan_zap (modprobe wcfxo works fine): WARNING[16384]: File chan_zap.c, Line 577 (zt_open): Unable to specify channel 1: Device or resource busy ERROR[16384]: File chan_zap.c, Line 4781 (mkintf): Unable to open channel 1: Device or resource busy here = 0, tmp->channel = 0, channel = 1 ERROR[16384]: File

I have seen this in the archives any number of times -- but I have yet to find a solution that works for me. Any suggestions you can offer would be most appreciated. Here are the answers to the questions I have seen asked in earlier posts. The log contains: Mar 10 12:26:29 WARNING[3015] chan_zap.c: Unable to specify channel 4: No such device Mar 10 12:26:29 ERROR[3015] chan_zap.c: Unable

Anybody else get theses warning? [Jun 26 10:08:55] WARNING[3158]: chan_zap.c:4747 zt_handle_event: Ring/Off-hook in strange state 6 on channel 1 PB

Did you compile and install libpri *before* Asterisk? I had same problem (among others) b/c I didn't install in the correct order. Try the awesome asterisk_update.sh shell script. Are you trying to emulate CPE or NET? Try signalling=pri_cpe Check for whitespace behind the statement, zapata.conf seems bitchy about whitespace. hth -----Original Message----- From: Steve Totaro