similar to: Compiling OSLEC in Dahdi w/ Intel Optimizations

Hi, I setup an asterisk system (asterisk 1.8-rc3, dahdi-linux-2.4.0 with dahdi-extra from Tzafrirs git, kernel 2.6.35.4). The hardware is an older pc system with Celeron CPU (2.5 GHz) with a Beronet BN4S0 ISDN card. The system starts without any errors. I discovered a severe issue. The kernel panics on a very small load. The first call normally gets through. If I start the second or third call

Hi, We installed the latest 1.4.24 on a test machine and can't get zaptel nor dahdi compile. It's a Linux Debian Etch. Errors we have: keewi:/usr/src/dahdi-linux-2.1.0.4# make make -C /lib/modules/2.6.18-custom.2/build ARCH=i386 SUBDIRS=/usr/src/dahdi-linux-2.1.0.4/drivers/dahdi DAHDI_INCLUDE=/usr/src/dahdi-linux-2.1.0.4/include DAHDI_MODULES_EXTRA=" " HOTPLUG_FIRMWARE=yes

Hi list, I install dahdi-linux successfully with the module of oslec for the echo, but when I specify it in the system.conf the echo canceller oslec it shows me errors: DAHDI_ATTACH_ECHOCAN failed on channel 4: Invalid argument (22) I see that the echo cancellers is supported: mg2, kb1, sec2, and sec because oslec is not supported?, but he has support to compile it with dahdi_linux! best

Dear list, I've set up an RPM repository with several asterisk-related RPMs that I think contain some improvements upon what are already out there. The first goal is to be able to build an Asterisk + FreePBX system on CentOS 5 with the EPEL repo enabled; in our environment, where all our systems are under configuration management, either an appliance-type solution or a manual

Hi, I am having troubles in building xen unstable. make[3]: Entering directory `/data/xen/build/xen-unstable.hg-3.0-20060725.5/tools'' [ -f ioemu/config-host.h ] || \ (cd ioemu && sh configure --prefix=/usr) Install prefix /usr BIOS directory /usr/share/xen/qemu binary directory /usr/lib/xen/bin Manual directory /usr/share/man ELF interp prefix Source path

Hi there I just tried running Freetel with wine does anyone have this working? Freetel breaks with a message: "Cannot bind socket" i wonder if this has anything to do with using a non-TCP protocol it would be very nice to get this working 'cos there do not seem to be any good linux web phone apps that can talk to people with windows machines. wine gives

Not sure how I should officially report this, but I'm getting a compile error with DAHDI-linux 2.7 when I define CONFIG_DAHDI_NET in include/dahdi/dahdi_config.h. I am able to compile successfully when I leave it undefined, but I need to be able to use the network support. <snipped> /oct6100_api/oct6100_tsst.o AR /tmp/dahdi-linux-2.7.0-net/drivers/dahdi/oct612x/lib.a

The Asterisk Development Team has announced the releases of: DAHDI-Linux-v2.8.0-rc5 DAHDI-Tools-v2.8.0-rc5 dahdi-linux-complete-2.8.0-rc5+2.8.0-rc5 This release is available for immediate download at: http://downloads.asterisk.org/pub/telephony/dahdi-linux http://downloads.asterisk.org/pub/telephony/dahdi-tools http://downloads.asterisk.org/pub/telephony/dahdi-linux-complete *** THIS RC FIXES

The Asterisk Development Team has announced the releases of: DAHDI-Linux-v2.8.0-rc5 DAHDI-Tools-v2.8.0-rc5 dahdi-linux-complete-2.8.0-rc5+2.8.0-rc5 This release is available for immediate download at: http://downloads.asterisk.org/pub/telephony/dahdi-linux http://downloads.asterisk.org/pub/telephony/dahdi-tools http://downloads.asterisk.org/pub/telephony/dahdi-linux-complete *** THIS RC FIXES

hello, all of users: there are header files missed when you compile dahdi with kernel-2.6.29 or 2.6.33. i believe that few files are affected: wctdm.c dahdi-base.c wcb4xxp/base.c, opvxa1200.c... the errors look like these: ================================================ from?/usr/src/dahdi-linux-complete-2.2.0.2+2.2.0/linux/drivers/dahdi/dahdi-base.c:61:

I am getting this: make gcc -g -Wall -Werror -Wstrict-prototypes -Wmissing-prototypes -fPIC -O2 -MD -MT pritest.o -MF .pritest.o.d -MP -c -o pritest.o pritest.c pritest.c:50:28: fatal error: dahdi/tonezone.h: No such file or directory #include <dahdi/tonezone.h> I am using dahdi-linux-complete-2.11.0+2.11.0 I did "find . | grep timezone.h" from the dahdi root and its not

Is there a proper, documented way to cross compile DAHDI and Asterisk for a processor/system other than the one you're currently typing on? Now.. I have been doing this for some time, but it's been really frustrating every time I change/upgrade, etc. I've just tried to compile DAHDI for an AMD Geode system on my development system which is Intel Atom. Building the kernel is easy -

Greetings- I'm wondering if the Digium PRI cards can be used for data (Cisco HDLC, PPP, etc) or if they're for voice circuits only. I haven't been able to find any information on this. All documentation direct from Digium seems to indicate their hardware is for voice applications only. Sangoma's cards work in either voice or data mode but of course this is configured in their

I have setup a asterisk with freepbx, a TE122 and i have an ISDN. My problem now is that callers are experiencing echo. checked on dmesg i saw this: # dmesg -c dahdi: Disabled echo canceller NLP because of CED rx detected on channel 2 i searched google but found no soolution and i have no idea what that error means. below are other details that might be of value. # dahdi_hardware

Hi All, Which echo cancellation is good between OSLEC and MG2. Dahdi by default use MG2 echo cancellation on channel. If i want to use OSLEC then what should i need to do ? Do i need to recompile dahdi with OSLEC ? -S -------------- next part -------------- An HTML attachment was scrubbed... URL:

Hello All; Wanpipe is working only with sangoma cards so it does not work with digium cards? Also, who is better: to have echo canceler built in with the hardware or using olsec? Regards Bilal

Hi, I'm used to add OSLEC source code into asterisk and use it as default echo canceller. Currently, I'm proceeding this way: download the kernel source code roughly matching the kernel version I'm targeting with command such as "wget http://kernel.org/pub/linux/kernel/v3.0/linux-3.2.46.tar.bz2" copy the echo subtree into dahdi change dahdi's Kbuild file (for dahdi

Hi, I was install OSLEC yesterday and my problems with echo are all solved. But now all my calls have a big noise at background. I was try change some filters in oslec-ctrl-panel.sh, but it don't save nothing who I do. Does anyone had the same problem? -------------- next part -------------- An HTML attachment was scrubbed... URL:

On Fedora 11, gcc-4.4, I'm trying to build oslec in dahdi-linux, but: [asterisk at asterisk dahdi-linux]$ make make -C drivers/dahdi/firmware firmware-loaders make[1]: Entering directory `/home/asterisk/build/dahdi/svn/dahdi-linux/drivers/dahdi/firmware' make[1]: Leaving directory `/home/asterisk/build/dahdi/svn/dahdi-linux/drivers/dahdi/firmware' make -C

Hello list, Can someone outline the steps for selecting OSLEC canceller in 1.4.6? I know there was a bug fix for this but I can't figure out how to select it. Thanks Roy Anciso Director of Technology Manistee Intermediate School District 1710 Merkey Road Manistee, MI 49660 Ph: 231-723-4264 Fx: 231-723-1690 roy at manistee.org -------------- next part -------------- An HTML