similar to: faxing via linksys SPA3102 half page goes through

Does anybody know if the process of upgrading firmware on "Linksys SPA3102-NA" in Linux is the same as on Sipura 3K as described on voip-info.org http://www.voip-info.org/wiki/view/Sipura -- #Joseph GPG KeyID: ED0E1FB7

Hi All, In our small office calls to the PSTN are currently sent via Asterisk and a Linksys SPA3102 (1 x FXO and 1 x FXS): SIP Phone --> Asterisk --> Linksys SPA3102 --> PSTN If the PSTN is in use on SPA3102 I need a way to get the call to then route out over IAX termination. SIP Phone --> Asterisk--> Linksys SPA3102 --> PSTN (In Use)

Hi, I have been considering a purchase of the linksys spa3102 for a couple hours but I would like to know from someone here, wether this device will support faxing on my local asterisk server, I have had success sending and recieving faces with an x100p, and recall that in the old documentation, they mention that if I send/recieve faxes, that it all should be done on the local server for best

Hi list, After failing to get a Sipura/Linksys SPA3000, which I've configured as a PSTN gateway, to pass on the Caller ID, I decided to try my luck with a Linksys SPA3102 after hearing some promising stories. Unfortunately, I've run into a completely new problem: it seems Asterisk won't let this device register. I went about configuring the SPA3102 in much the same way as I

Hi, I've read in this mailinglist archives some notes related to Linksys SPA3102 provisioning but I couldn't find there the answer I'm looking for. Is it possible with this box (mine is unlocked) to store its config file(s) in a TFTP server, and have this(these) file(s) reloaded at boot time, for instance ? In embedded web server, there is a Provisioning tab full of settings but none

Somebody has 5.1.7 firmware for SPA3102? I'm having issues with inbound/outbound calls using asterisk through SPA3102 with firmware 5.1.10. I've read it has a codec bug, since it doesn't care about what you set up in Preferred Codec. Any help will be appreciated. Sebastian -------------- next part -------------- An HTML attachment was scrubbed... URL:

Ok, I downgraded spa3102 to 3.3.6. Now when I make a call from pstn and call is established asterisk seems to drop the call. However I still hearing ringback on pstn side, call is established again, and asterisk drops the call again, like a loop. -- Executing [preat_admin at nodo:1] Playback("SIP/PSTN-08214948", "horario-atencion/our-business-hours-are") in new stack

I need another Sipura 3K and the replacement I think is Linksys SPA3102. Any input on how reliable is it? -- #Joseph GPG KeyID: ED0E1FB7

Hello, I've got an analog phone which is currently receiving unsollicited FAX calls from PSTN. For learning purpose, I'm preparing an Asterisk/SPA3102 setup that would let voice calls come in and out and translate incoming FAX calls to TIF files (forwarded through email)). My target setup is : PSTN <-- analog--> SPA3102 Line Port <-- SIP --> Asterisk <-- SIP -->

I was having problems getting a Linksys PAP2T-NA to work with Pitney Bowes mailing station so it could use its modem to dial home and download postage/software updates. After scowering the web, I couldn't seem to find a definite how to article on what settings were needed. I finally came up some settings by combining the information from various places around the 'net. I have typed out

Hallo! I had ordered a Sipura SPA-3000 in the UK, but the supplier turned out to be unreliable and never shipped. Yesterday I went looking for alternative suppliers and found the Linksys SPA3000 device. It's a different box, but the specs look very similar. Is this the same device? Has anyone used this Linksys SPA3000 successfully with Asterisk? Thanks, Frank

Hello, i have a SPA3102 and asterisk v. 1.2.18. I also hev a mysql database with cdr. Well all I want is to receive incoming calls from pstn on specified sip account (suppose 8000), and to initiate outgoing calls from all my asterisk sip accounts through SPA3102 device. Someone can explain me what may i set on SPA and asterisk to do this thing. Thank you for your support. -------------- next part

Hi list, After successfully configuring Linksys SPA3000 and SPA3102 devices as Asterisk PSTN gateways, the only thing I can't get working is the PSTN Caller ID. The analog and SIP phones I've used can both display CIDs for internal calls, while the analog model also displays CIDs correctly when attached directly to the PSTN line. However, when PSTN calls come in via the SPA

Any ideas ????? Jonn -------- Original Message -------- Subject: [asterisk-users] Internal LAN echo problem Date: Wed, 24 Oct 2007 08:34:32 -0500 From: Jonn R Taylor <jonnt at taylortelephone.com> Reply-To: Asterisk Users Mailing List - Non-Commercial Discussion <asterisk-users at lists.digium.com> To: Asterisk Users Mailing List - Non-Commercial Discussion <asterisk-users

Hello all. I am just getting back into Asterisk and I am setting up my Linksys SPA3102. I have incoming calls working fine, as is the phone plugged into the unit. My problem is I cannot get the SPA3102 to dial a phone number automatically. I can call the extention of the PSTN and I get a second dialtone, and I can then manually dial. I'd like to be able to have Asterisk pass the

Im a 3-days-asterisk-newbie. In 3 weeks, I must have a PBX installed in a new office of ours: Panasonic or Asterisk. Asterisk would be, if I can emulate some Panasonic functions on Asterisk fast, to convince the executives. What I have done until now: Bought 1 Linksys pap2 (2 FXS), 1 Linksys SPA3102 (1 FXS + 1 FXO) for making asterisk tests. Configured Asterisk/Fedora 9 so I can make SIP->PSTN

I'm using Linksys SPA3102 adapter and have a strange ring tone: Long-Short-Short or Long-Long-Short-Short Does anybody know which setting adjust this ring tone on SPA3102 Sipura rings normally. I'm not sure if setting are on Regional Tab or User Tab -- #Joseph

Hi all, i need sample xml configuration files for linksys pap2, linksys pap-2t, sipura 2100, sipura 2102, 1001, 3000 and 3102. All of these are linksys/sipura products. So if anyone has these sample files then plz share. -- Best Regards Rizwan Hisham Software Engineer Axvoice Inc. www.axvoice.com -------------- next part -------------- An HTML attachment was scrubbed... URL:

Hello list, this is my first post on this list. I have a server with Asterisk and a Linksys SPA3102 with 3 SIP phones. I have configured the SPA PSTN line as trunk to receive and send calls. I can call outside from SIP phone throw the PSTN line and all is OK, the problem is when I receive a call from the PSTN, on the out caller phone there is a demo playback. I want to redirect the call to a

(Im' answering cc the list, so the knowledge keeps there, and maybe some more qualified answers become). Am Mittwoch, den 15.10.2008, 18:00 -0700 schrieb Francisco del rosario: > Hey Rodolfo... Need some help from you ... > I need to know what hardware do I need to make SIP calls if I set-up > asterisk > So the situation is that I have a PC and configure the software of my PC to