similar to: Windows Mobile MWI and asterisk

Here's a link to it: http://forums.digium.com/viewtopic.php?t=4363&highlight= Regards, Scott -----Original Message----- From: Scott Keagy Sent: Monday, December 04, 2006 5:05 AM To: Asterisk Users Mailing List - Non-Commercial Discussion Subject: RE: [asterisk-users] mwi for voicemail not showing up for realtimeconfig. A while back I posted a fully functional though somewhat elaborate

Hi, I am using Asterisk personally at home. My SIP client (SPA 3000) supports MWI with SIP NOTIFY messages. With a previous version of Asterisk I had no problems with MWI. But now I am using the following version which comes with Trixbox 2.8.0.1, and I have problems with MWI. Asterisk 1.6.0.9-samy-r27 Problem description: When a voicemail is left on the extension, a SIP NOTIFY message is sent

Hello everyone, My setup: Debian squeeze Asterisk 1.8, DAHDI, libpri, compiled from source TE110P, attached to a Deutsche Telekom Octopus E Modell 300/800 I'm trying to get MWI for Voicemail working. In the same server I have also got an Eicon DIVA PRI card for testing purposes (it is integrated via CAPI and the chan-capi channel driver into my Asterisk). MWI works just fine there. I

We have recently pulled an ancient Fujitsu-branded Centigram voicemail system out of production use and replaced it with an Asterisk box, which is now serving as our enterprise voicemail system and automated attendant. The Asterisk system is connected to a Fujitsu F9600 PBX and uses the 1.6.1.x SMDI module to communicate between the two systems. Save for one issue, the replacement of the old

Hello I am running the following setup in order to make VoIP calls at home. Home Phone <-> SPA3000 <-> Asterisk Home <- IAX2 over Internet <-> Asterisk Office The voice mail for Home Phone is hosted on the Asterisk Office machine. I wanted to have a way to check the status of my voicemail on my home phone directly. In order to do so, I've patched both Asterisk Home and

Hi guys, is there any way to execute a command *after* a caller has hung up the call? Something like exten => s,1,Voicemail exten => s,2,AGI(mwi.agi) I'd like to turn off the MWI on my cellphone (which is done by gammu[1]) Or does anyone know a way to check the state of the MWI from outside, i.e. with a cron-job? I'm turning on the MWI with the email-notify from voicemail, but

Howdy I have a question regarding support for picking up when the telco sends a MWI message. My client's setup is a small office with three incoming lines on a TDM400P with iaxy's and a Grandstream as extensions. I am using CVS Head from yesterday. (I was resolving a different issue.) Since they only have two voice lines, with the third as a fax, I am using voicemail from the telco.

Hi, I didn't get any response to this posting so thought I'd post again in the hope that anyone who missed the posting the first time may be able to offer some ideas. This problem isn't specific to the particular model of phone - I can see from sip debug that the local extension itself is not being sent any Messages-Waiting headers. Any alternative strategy would also be welcomed

hello, I read http://www.voip-info.org/tiki-index.php?page=Asterisk+at+large anybody could tell me more about this ? Is it available with ARA ? Regards Harry Method 3 Q: If you have your SIP phones registered with SER but your voicemail is handled by asterisk, how do you get the MWI (Message Waiting Indicator) light to function on the phone? A: In sip.conf create a section pointing at your

my biggest concern about defaulting the context to anything at all besides [default] is that you then have to remember to configure the voicemail.conf with the corresponding contexts. as it stands, you have the ability to do just that, but you don't have to. if you have several hundred extensions broken out by dozens of contexts, it might not make sense to force the voicemail.conf to follow

We are using Bellsouth 8867 phones on our TDM400B FXS lines (asterisk-1.0.3). It has a "Voicemail" light, which appears to be MWI (according to the manual it works with voicemail from the telco that sends a FSK signal). The dialtone stutters when a line has voicemail, so I know that I have the mailbox setting right in zapata.conf, but the light doesn't go on. I am also getting

I'm testing my asterisk system and the realtime backend. My Asterisk build is rather aged, 03/18/2005 CVS. I have successfully moved Sip peers and Voicemail boxes to the realtime database backend and this works very well except for MWI. I don't seem to be able to get MWI to work when I store the voicemail information in a database backend, from a flat file it does work fine. I'm using

Hi, I'm using a Cisco 7905 (with SIP image CP7905010300SIP050414A) on Asterisk 1.07. Whenever the user gets voicemail, the MWI goes on, and when the user listens to the voicemail, the MWI goes off. However, the phone is configured (as in the default config by Cisco) to re-read its configuration from tftp every hour. This 'warm reboot' also turns off the MWI, and it won't

Hi, It seems to me that DECT Gigasets do not support MWI when connected to a Polycom/Kirk DECT base station : when a new message is dropped into user's mailbox, I can see a NOTIFY message sent by Asterisk to Polycom/Kirk DECT base station (here a KWS300) but Gigaset's handset MWI remains unlit. At the same time, a Polycom/Kirk handset subscribed to the same base station would turn its MWI

Been working fine for us so far. -----Original Message----- From: Andrew Joakimsen [mailto:joakimsen@gmail.com] Sent: Wednesday, December 06, 2006 6:33 PM To: Asterisk Users Mailing List - Non-Commercial Discussion Subject: Re: [asterisk-users] MWI across multiple servers How well would NFS work in this situation? On 12/6/06, Porier, Jeremy M. < jporier@ccu.edu> wrote: We are about to

Dear List, I'm having a blinking MWI light on the snom 320 even when there's no message waiting in Asterisk. We've managed to make the voicemail button work using fromdomain=192.168.0.1 in sip.conf vmexten=2500 (our VoicemailMain application extension in extensions.conf). We also added notifymimetype=application/simple-message-summary also in sip.conf to allow SIP simple MWI

ok this is a wired problem. when i use X-Lite - after i register with asterisk X-lite sends a subscribe/notify request to asterisk to determine if the account has any messages waiting. if i create a sip.conf account using: user 12345 with a voicemail box 12345 - MWI works user jwolosuk with a voicemail box 12345 MWI fails (gets a 404 not found upon a subscribe) does anyone have a clue why

Like some other people on here, I am trying to integrate Asterisk for VM with CCM version 3.x. I've got gnugk and Asterisk running, I've got CCM registering with the GK, I've got the voicemail pilot and profiles setup. A call comes into a CCM phone, it rings, rolls to the correct VM on ASterisk and asterisk emails the voicemail and I can check the voicemail, but I cannot get MWI

I have many remote locations that dial into a central server to retrieve voicemail via IAX. Outbound calls are handled as SIP calls from a Snom to a local (to them) Asterisk server that dials the main server thru IAX. I have trained them to check their voicemail via the emailed WAV file, however some of them are, how shall I put it, idiots*, and insist that they *have* to have the MWI indicator

Hello all, I have an Asterisk installation with Kamailio using realtime integration. I have gotten my clients to register, but there is something odd about the sip message flow with some of my clients. My clients are Zoiper and Asterisk is 11.10.2. When I set 'Subscribe to MWI' value to 'both', after a normal, successful registration Asterisk begins to send REGISTER messages to