similar to: reinvite

Wondering if anyone has experienced an intermittent one way audio (called party can not hear) problem in these conditions; Several IP501 phones local, same subnet. Remote asterisk No NAT anywhere Polycom IP501 ulaw only, canreinvite=yes Asterisk Call termination path is to a sonus GSX operated by the upstream carrier, ulaw only, canreinvite=no The idea is that if the Polycoms are

Hi, I put reinvite=yes in my sip.conf. For testing, I restricted the codecs to alaw. I have no modifiers in my dial command. Thus, there should be no reason not to reinvite. Call (sip, authenticated) comes in and is forward via SIP (not authenticated) to another asterisk box. Unfortunately, media path still passes through the asterisk box in the middle. Using sip debug I even can't find

Hi, i'm using * with SER and a cisco 3725 as Gateway. I noticed that the reinvite is not working if i use SER and if i don't use IT (*---->Gateway) the reivite works so the * server is able to let the RTP direct from gateway to SIP Clients. Do you know in which way can i let it work with the SER too. Becouse i need SER to manage other VOIP communities but if i'm not able to use

Hi All, We are using asterisk 16.5 and having an issue with the first re-invite after the call has been established. We can see the call gets up and you see in the logs the bridge type has changed and after that a re-invite is triggered. Is there any possibility to deactivate this kind of reInvite? We have some race conditions while have multiple asterisk in the call flow and the different

Hi all, So the scenario is: A -> Asterisk -> B after B send back 200 OK Asterisk is answering the call to A. Directly after the Answer Asterisk generates a ReInvite to A and the only difference between the 200 OK sdp and the reInvite sdp are the offered codecs which are forwarded from B to A. Here i do not understand why this could not be done in the 200OK to A? As far as i understood

Hi All, I haven't started sip traces or debug yet, but was wondering what the deal is with the CCM and reinvite, why it doesn't work with Asterisk (using 1.2.9.1). I can make calls back and forth all day with canreinvite=no, when I try to reinvite an inbound sip call from the CCM with Asterisk server 1 to Asterisk Server 2, I get one-way audio issues. All the RTP ports are configured

I've an Asterisk server running in my office, which forwards all long distance calls to a third party SIP service using an extension rule: exten => _1XX0.,1,Dial(SIP/{EXTEN:4}@external_sip_server.com) (1XX0 is the international calls rule for Chile) Also, in my sip.conf, I've defined canreinvite=yes to decrease the network load to the server caused by the RTP. However, the external

Hello, I know there's a problem with Asterisk at the moment in that while it's easy for one caller to dial another (using the dial command), it's tricky to connect two calls that are already in progress. I've been using MeetMe to achieve this (with each caller's call being directed to a dynamically created conference room programatically), and this is working - kind of -

Hi, I just ran into what seems to be an issue on re-invites. I'm not sure if it's a bug or as designed, so I thought I'd ask the question. Here's my setup: - Asterisk 1.8.13.0 - Phone A: Polycom ip331, only allowed to use ulaw, canreinvite=yes - Phone B: Polycom ip330, only allowed to use alaw, canreinvite=yes Phone A calls the extension of phone B. After the normal call setup

I have a setup with a number of customer Asterisks with T.38 enabled. This works quite well for each customer sending faxes between branch offices. They all have a SIP trunk to a central Asterisk, which connects them to the PSTN through various providers on dedicated lines. I cannot enable reinvite on those SIP trunks, because that would allow calls from the customer's phones to get

Hi All, I'm having a really weird can reinvite issue. I've been banging my head around on this for days now.. I have two asterisk servers. One at 172.20.0.11 One at 172.20.2.5 172.20.0.11 is a hosted box and serves multiple offices 172.20.2.5 is a box on site at a customer's office. A phone at 172.20.128.10 makes a call using server 172.20.0.11 to a phone at 172.20.2.80 via server

Hey Folks, Is it possible to transfer an incoming call back out without a "trombone" effect. For instance; Caller dials my broadvoice # --> Asterisk Answers and plays a menu --> the caller selects an option --> asterisk transfers the call to my cell phone via broadvoice and removes itself from the equation so I end up with... Caller --> Broadvoice --> Cell Phone Vs.

Hi, I've been playing with T.38. I observed that mostly but not always, it's the "calling endpoint" that reINVITE the other party to drop current SIP/G711 session and start a new T.38. But sometimes, it's also the callee party that reINVITE the calling party. Which is the "standardized" or most common, way to start a T.38 session ? Shall it come from callee or

Hi My call flow is T38 static IP gateway --> Asterisk --> Sip Provider--> PSTN Call is placed in reverse direction - from PSTN to T38 Gateway. T38 GW reinvites with T38, and asterisk passes it along to the SIP provider. The SIP provider challenges it and asterisk reponds to the Challenge with INVITE with Auth credentials...however, the Asterisk changes the SDP and replaces the T38

Hi All, I'm using DISA on my * server to avoid overseas toll charges when making calls to Western Europe from my cell phone. I have DISA working with a DID from a VoicePulse Connect account. The outgoing call to Europe is also made via Voicepulse Connect. I see that the IAX media path is bridging the inbound call to the outbound call so that the media stream entirely bypasses my server once

Greetings- Working with the T.38 gateway functionality that is sparsely documented [1] , I'm attempting to get the following functional: Asterisk calling system -> Asterisk system in T.38 Gateway Mode (box in question) -> SIP Provider The problem is: -The provider is not initiating a reinvite to T.38, even though it is 100% supported -Asterisk is not detecting the CNG tones from

Is there a way to do the following scenario? 1) my asterisk box receives an incoming call from a toll free number provider such as nufone, voicepulse, etc. 2) It then dials a number via SIP and outputs a DTMF sequence. ok, that part we do every day. 3) After DTMF though, is it possible to get the two SIP channels (original SIP caller plus SIP called) hooked together and have my pbx no longer

Hi all, we have a problem with a reinvite sent by our SIP provider to change audio codec due to the recognition of a fax tone. After that the SIP call session has been established (INVITE and 200 OK) we have the following codec situation: UAC ASTERISK UAS | ASTERISK UAC PROVIDER g711 <----------------------> g711

It is not clear how exactly g729 pass-through can be enabled. I have a SIP call off a gateway come into an Asterisk menu, and then I send the SIP call to another SIP gateway using Dial(). Even though codec preferences have g729 listed first, it never gets used. Both gateways have separate peer entries in sip.conf, and both have canreinvite=yes set. Can Asterisk change the media type during

Hi, I've finally given up on trying to fax over my Digium TDM400 card. I've found that fax over VoIP is quite more reliable (at least I can receive the faxes). My ITSP supports G729 and alaw/ulaw. As I won't be receiving faxes everyday (just ocasionally), i pretend on using g729, unless a fax is detected. Is there any way to force asterisk to make a reinvite, and swap the codec on