similar to: Goto Question

Hello, We had an incident recently where a call was in queue for an extended period of time. We use queuemetrics for reporting, and it reports that the call was waiting for 20 minutes. The different thing about it is that the disconnect reason is stated as Timeout. Is there a set maximum time a call will wait in the queue before being automatically disconnected? I tried looking through the code

As part of a project to move a clients Cisco phones to SIP to work with an Avaya system, I'm taking a Cisco 7961 we bought and adding it to our Asterisk setup. Now, I've gotten the firmware files from the site, the latest version is 8.4 which contains the following files: apps41.8-4-3-16.sbn cnu41.8-4-3-16.sbn cvm41sip.8-4-3-16.sbn dsp41.8-4-3-16.sbn jar41sip.8-4-3-16.sbn

Hi All, I'm confused! My Asterisk system has a Zap trunk and three SIP trunks. I'd like to configure the dialplan to route via the first trunk in a list and if that's not available or it's busy, fall over to the second, then to the third, etc. AIUI Dial(Zap/1&SIP/out1&SIP/out2/${EXTEN}) rings all the trunks in the list and bridges to the first to answer. Unfortunately,

Hello, I'm supporting an Asterisk setup in the Cayman Islands(I'm in Canada), which is running a PRI to a local telecom provider. We are looking at improving the setup, setting up high availability etc. My manager is interested in putting a TDMOE device in place, so we can easily switch the line remotely. He's looking at the following device:

Does anyone know of a way to force the voicemail password for users to be of a certain length? We've setup operator=yes within our voicemail.conf and want to have the users use a long password to prevent possible guessing by external parties. I'm not seeing any such option in my research. If it doesn't exist it might be a decent feature. Thanks. Running: 1.4.25, on CentOS 4.7

Hello, I've been looking into OpenSIPS to see if it's a worthwhile addition to our setup. We're currently running a cluster, using Heartbeat, between two servers. It works well but I'm interested in seeing if we can improve it. My manager heavily uses RPM's for installations rather than source, particularly using yum to update. I'm trying to actually install OpenSips via

Hello, I'm interested in knowing if anyone out there has successfully connected Asterisk to a Cisco UC 560 via SIP trunking? We have a client of ours that we put in an Asterisk install, one of their sister companies who we don't control is putting in a Cisco UC 560. From my looking I think it can be done, but the vendor is telling them it can't. Thought I'd ask around here and see

On Feb 23, 2017, at 2:55 PM, Drew from Zhrodague <drewzhrodague at zhrodague.net> wrote: > > Thank you - I have included the capture, and attached it here. USB is new to me. I am a good sysadmin, but terrible programmer. > > I was able to use the usbhid-dump utility using -e stream, the last octet will report the state of the detected power (1/2 for ignition on, 3 for

Hello, I thought to post this here before my manager starts his own coding project to give us a workaround. My situation I'm running into is as follows: 1. A call comes into our Asterisk system, it's trunked from one office to another via IAX. 2. Call enters a queue and is picked up by one of the agents. 3. That agent has to transfer the call, could be for a number of reasons the client

I compiled samba 2.0.2 on a intel RedHat 5.2 machine successfully. I then set up the machine according to the DOMAIN_MEMBER.html instructions to join my domain. Everything seemed ok so far, i got the message: change_trust_account_password: Changed password for domain INFO. smbpasswd: Joined domain INFO So far OK, right. I set up the smb.conf like this. The options in Global that are commented

-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 Hi, I have a strange su hehavior on a CentOS 5.4 32Bit installation in a VMware ESXi virtualizied environment: If I am root and want to change the user to a non-root user, the system prompts me for a password: [root at halifax ~]# useradd test00 [root at halifax ~]# su - test00 We trust you have received the usual lecture from the local System

Dear all, I'm trying to produce a log-likelihood profile for a GPD estimate with the ismev package. When following the examples, everything is working fine, i.e. I get a nice parabolic log-likelihood curve. When using my own data (intensity of hurricanes at landfall), the log-likelihood curve looks like a step function. Am I doing something wrong here? Is my data not suited for the GPD fit?

Thank you - I have included the capture, and attached it here. USB is new to me. I am a good sysadmin, but terrible programmer. I was able to use the usbhid-dump utility using -e stream, the last octet will report the state of the detected power (1/2 for ignition on, 3 for ignition off, 0 for powered-off). 4th one seems to be voltage, and the 5th and 6th I believe are timers:

Am trying to update my wine i get the following .. [] download]# yum update wine* Loading "priorities" plugin Loading "fastestmirror" plugin Loading mirror speeds from cached hostfile * epel: ftp.nluug.nl * rpmforge: fr2.rpmfind.net * base: ftp.halifax.rwth-aachen.de * updates: ftp.halifax.rwth-aachen.de * addons: ftp.halifax.rwth-aachen.de * extras:

Hello! I have a Dockmaster from Copeland Engineering. This is a battery saver used for a laptop docking station in a police car, which has a USB port for relaying its internal timers and state. hid-generic 0003:04D8:0500.0001: hiddev0,hidraw0: USB HID v1.10 Device [Copeland Engineering, LLC Dock Master] on usb-0000:00:10.4-3.3/input0 I'm able to configure usbhid-ups, but it doesn't

Does anyone have suggestions about how to produce a map of British Colonial America 1775? At that time, Great Britain had 26 colonies in the Americas, including Bermuda, several Caribbean islands, "Quebec" (extending then almost to New Orleans), Nova Scotia, Newfoundland, Belize, and the 13 that declared independence in 1776. I've reviewed the "map"

be able to setup a SIP trunk. I've been able to successfully integrate a Cisco CallManager 7.x system with Asterisk using SIP trunking, so I imagine you should be able to do the same here. -- Thanks, --Warren Selby, dCAP http://www.selbytech.com --0016e651f0a6bbe47b04a303939e Content-Type: text/html; charset=ISO-8859-1 Content-Transfer-Encoding: quoted-printable <div

1. You don't appear to be including anything that is within the colon dirs so they are being left out by --prune-empty-dirs. 2. Includes only override excludes that follow them. Since your debug excludes are exceptions to the openSUSE_Leap_42.2/*** include they must be before it not after it. On 01/10/2018 05:46 PM, Istvan Gabor via rsync wrote: > Dear Kevin: > > ~ 1 year ago

Dear Kevin: ~ 1 year ago your answer helped me to solve my problem. This time I would like to do a similar thing but little bit modified. I read again carefully INCLUDE/EXCLUDE PATTERN RULES section of rsync manual but still cannot comprehend every part of it. I understand I have to add include patterns first and exclude patterns second. But it is not clear if I have to add all the include

Is it possible to configure libvirt to generate "predictable" MAC addresses for virtual NICS? (A configuration which accomplishes this by limiting the pool of available addresses would be acceptable for my use case.) Read on for why I want to do this ... I have a somewhat unusual use case. I am working with the OpenShift bare metal "IPI" installation process, which is