similar to: D-channel errors and Channelbanks

Hi, My asterisk server was working with a 4-FXO analog card (TDM400P). I recently added two digital cards: a TE120P (1 PRI) and a B410P (4 BRI). The B410P is still unconfigured but inserted in a PCI slot. The TE120P's jumper is set to E1 as it will connect to a commercial PBX's PRI card also configured as E1. My analog channels used to be 1-4 but since I added the new cards I changed

-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 I've been struggling with an ongoing problem the last month. Here is the layout of the wiring: T1 from ISP > DiTech Echo Cancel device > Voice Channel-Bank (same) T1 from ISP > (same) DiTech Echo Cancel device > asterisk1 server zap card > fax channel bank (same) T1 from ISP > (same) DiTech Echo Cancel device > asterisk1

Hi! Is there anyone that are using a E1-channelbank and have any tips about some type? Im looking at the TE410P and use one port for a PRI (Euro-ISDN, I think we're using some slightly modified version here in Sweden, but I'll check that tomorrow) and connect one port to a channelbank for 30 analogue telephones. It would also be great to get callerid on the analogue phones, so it would

Ok, the Zhone sucks and the Adtran 750/850 seems to be a little too expensive. Can anyone recommend a decent channelbank that won't break the bank? TIA, -- Troy Settle Pulaski Networks http://www.psknet.com 540.994.4254 ~ 866.477.5638 Pulaski Chamber 2002 Small Business Of The Year

Hello world; been using nut atop Debian GNU/Linux (sid) for about two years by now, my configuration broke as I upgraded the machine this morning (headin' for kernel 2.6 to have full support for the new GBE NIC included). I read through the UPGRADE.gz instructions provided with the Debian packages and tried to fix things according to the instructions pointed out there, but things still just

Hi, I am trying to install xen-3.2.0 , but its failing. The rpms used for installing are 1. xen-3.2.0-0xs.fc8.i386.rpm 2. xen-3.2.0-0xs.fc8.src.rpm 3. xen-debuginfo-3.2.0-0xs.fc8.i386.rpm 4. xen-devel-3.2.0-0xs.fc8.i386.rpm 5. xen-libs-3.2.0-0xs.fc8.i386 when I tried installilng the first rpm rpm -ivh /home/devi/Desktop/xen-3.2.0-0xs.fc8.i386.rpm it gave an failed dependencies

Hello lists, I,ve compaq ML350 with 2 Xeon 2.4 GHZ and FreeBSD 5.0 RELEASE installed and working very fine about 4 mounts. The machine running GENERIC kernel samba and firebird database server with no problems until at begining of this week, in morning machine freezes with no responce iven in conconsole, no responce from network (pinging) no responce on console (key pressing) the only way to get

Hello, I would like to install the latest tinc software on a fedora 8 Linux box. I tried the rpm for FC3 from http://dag.wieers.com/rpm/packages/tinc/, and I got dependency errors complaining that libcrypto.so.4 is needed. I've got openssl rpm package installed which uses a different versino of libcrypto, and creating symbolic links won't solve the issue. Then I found this article

Hi all, I compiled and installed Xen 3.2 source on FC8. Compilation and installation completed with no errors. However when I try to load Xen I get an error: Kernel panic - Attempted to kill init !!! This is my grub configuration: # grub.conf generated by anaconda # # Note that you do not have to rerun grub after making changes to this file # NOTICE: You have a /boot partition. This means

Hi: Any hints/pointers welcome. I am very new to Xen, I have a AMD "AMD Athlon(tm) 64 X2 Dual Core Processor 4000+" based system on which I am running X86_64 Fedora Core 8. I have installed Xen-3.1 on it, but I can''t get Xen to boot. It seems unable to find the root volume, the kernel panics and reboots immediately so I can''t capture or write down anything and I

I found a src.rpm for 1.1.5-1 for fc8 (not rh8!). I was able to rebuild it on my Centos build system. The rpms are identified as 1.1.5-1.i386.rpm, no el5 or other identification was placed in the files. I don't see how to control this when you rebuild from an existing src.rpm. Interestingly the fc8 designation was lost. I also rebuild it on my fc10 system. It worked, and the rpms have

Hello! Has anyone gotten 4.9R to recognize the "ServerWorks CSB6" ATA controller on a Dell 600SC? How about installing 5.2R on a 600SC? 5.2R recognizes the said controller, but it corrupts data. -- eof

Hello, Currently I'm moving over to linux. I got fedora core 7, and I've been running it on a virtual machine. There is one piece of software I can't live without. It's called writeitnow: http://www.ravensheadservices.com/ Wine is installed on my box. When I run the application I get the following error message: "The Java(TM) VM could not be started. Please restart the

Hello,   I can say that I have searched the entire ''world wide web'' and still haven''t found ''complete  and clear answers'' to the often asked question of: Given a Xen (release) build (say 3.2.0), which by default tries to get and build and assume Linux kernel-xen 2.6.18 from the mercurial repository, HOW TO override the build and make it work with a

Dear All, I have a asterisk setup that is currently running on version 1.4.15 - I wish to upgrade or migrate this instance to the current asterisk stable, 1.6.0.6. It is my intention to build a FC8 box, then install asterisk from source, and begin to migrate over the configuration. The thing is, this sounds so simple in my head, and I've had enough issues with asterisk, to know that life

I am having trouble mounting drives. We have a Windows 2008 (10.1.1.17, MRISRV02) server with folders I what access to. On my Fedora 8 client, in my fstab file, I have: //10.1.1.17/USERS/Jeff /home/mriuser/Desktop/jeff cifs rw,username=cluster,password=mrilab 0 0 and this works just fine. My samba is up to date: [mriuser at localhost ~]$ rpm -qa | grep "samba"

Hi, I''m trying to get copy/paste/cut working between my Xen host (FC8 64) and guest OSs (Centos 5.1, Windows 2000). I''ve tried the viewer in virt-manager, virt-viewer, and vncviewer. None of them seem to transfer clipboard contents between host and guest, even with both clipboard checkboxes selected in vncviewer options. Does anyone know how to get this working? Thanks.

Is there a way to use "Nouveau" (open source Nvidia) driver in CentOS 5 ? "nv" seems to support only the lowest resolutions thru the dvi output (NV44 chip), and I don't like the idea of installing propiertary Nvidia drivers. This way I came to Nouveau. I had a look at some Fedora rpms, but they needed something CentOS obviously doesn't have: # rpm -ivh

i thought i would run up a fedora 8 installation and take a look around, my default kickstart installation includes puppet which shouldn''t be a problem however the puppet client fails with Certificates were not trusted: hostname was not match with the server certificate The cause is obvious, the hostname of my puppetmaster is ''puppet1.mydomain.com'' and

hi, im using xen on fedora core 8 as dom0, and i downloaded the fc8 image from jailtime.org, when i use "xm create /xen/fedora/fedora.fc8.xen3.cfg -c" i get the following on my terminal: Using config file "/xen/fedora/fedora.fc8.xen3.cfg". Started domain fedora.fc8 Linux version 2.6.21-2950.fc8xen ( kojibuilder@xenbuilder2.fedora.redhat.com) (gcc