similar to: service dahdi stop

I did an svn check out of dahdi. I am running centos 4.7 on the make all I get an error. /usr/src/dahdi-complete/linux/drivers/dahdi/wcb4xxp/Makefile: No such file or directory make[4]: *** No rule to make target `/usr/src/dahdi-complete/linux/drivers/dahdi/wcb4xxp/Makefile'. Stop. make[3]: *** [/usr/src/dahdi-complete/linux/drivers/dahdi/wcb4xxp] Error 2 make[2]: ***

What is needed to get DAHDI to start up correctly on CentOS 7 and systemd... I am using DAHDI-linux-complete 2.11.1 I saw mention in my search that it has been fixed after 2.11.1 but cannot find what the fix is. Thanks, Jerry -------------- next part -------------- An HTML attachment was scrubbed... URL:

Because of a kernel upgrade i needed to recompile DAHDI. Dahdi 2.0.0 with 2.0.1 was working ok, after the reboot and compile it doesn't start anymore. Firstly it tells me it is using /etc/zaptel.conf which is deprecated, if i remove that file it complains that this file is missing..... Secondly i get an error about a missing dev file which refers to zap (which seems strange to me because

I have an i686 cpu and when compiling from source I get this error: touch /usr/src/dahdi-linux-2.2.0/drivers/dahdi/xpp/init_fxo_modes.verified Building modules, stage 2. MODPOST WARNING: could not find /usr/src/dahdi-linux-2.2.0/drivers/dahdi/vpmadt032_loader/.vpmadt032_x86_32. o.cmd for /usr/src/dahdi-linux-2.2.0/drivers/dahdi/vpmadt032_loader/vpmadt032_x86_32.o Anyone else seeing this?

I am current running on a production system zaptel 1.4.12.1 libxpri 1.4.1 asterisk 1.4.25 The above configuration works. I tried to update to dahdi 2.2.0, libpri 1.4.7 and asterisk 1.4.25 This did not work. calls came in but not out. I dropped back to the initial configuration. Today, I dried only updating libpri on the original configuration. I removed /usr/lib/libpri* installed libpri 1.4.7,

Hi, I am running Fedora 7 VM. On an earlier configuration with zaptel and Asterisk 1.4.21 , meetme worked alright. I upgraded to Dahdi and Asterisk 1.4.26, and the result is choppy sound via Meeme, while a simple Musiconhold works OK with descent audio quality. So I am sure its a Dahdi_dummy problem. Running dahdi_test gave me very poor results. Opened pseudo dahdi interface, measuring

I am trying to use dahdi complete 2.11.1 with a 4.13 kernel. - NOT working for know reasons. I tried applying two patches but still get compile errors. AHHH! How do I just use git to get the latest with the fixes ???? This command did not work - I still get the errors. git clone git://git.asterisk.org/dahdi/linux dahdi-linux Thanks, Jerry -------------- next part -------------- An HTML

Hello Friends, I am trying to Installl dahdi on amazon EC2 which have Open-SUSE-11.1 X86 version. and here is snap of uname- a command *Linux ip-10-160-86-41 2.6.32.19-0.3-ec2 #1 SMP 2010-09-17 20:28:21 +0200 x86_64 x86_64 x86_64 GNU/Linux* when I try to run DAHDI distribution dahdi-linux-2.1.0.4 I am getting following error *echo "You do not appear to have the sources for the

I have DAHDI 2.2.1 my system.conf file is : span=1,0,0,esf,b8zs bchan=1-23 dchan=24 echocanceller=mg2,1-23 loadzone = us defaultzone = us Its telling me: Running dahdi_cfg: DAHDI_SPANCONFIG failed on span 1: Invalid argument (22) [FAILED] What am I missing. Its straight PRI NI2.

lspci | grep Digium 03:05.0 Ethernet controller: Digium, Inc. Wildcard TE122 single-span T1/E1/J1 card (rev 11) dahdi_scan So I have a card in a box - lspci shows it... dahdi_scan reports nothing. Is my card dead? Jerry -------------- next part -------------- An HTML attachment was scrubbed... URL:

I am changing a system from zap to DAHDI. I removed everything zap. when doing the command: sh -x /etc/init.d/dahdi start, I see initlog -q -c 'modprobe wct4xxp' sh: /sbin/ztcfg: No such file or directory FATAL: Error running install command for wct4xxp doing updatedb then, locate zap returns me /var/lib/asterisk/sounds/spy-zap.gsm /usr/share/groff/1.18.1.1/font/devps/zapfdr.pfa

I am installing dahdi on a machine lspci 00:00.0 Host bridge: Advanced Micro Devices [AMD] RS780 Host Bridge 00:01.0 PCI bridge: Hewlett-Packard Company Unknown device 9602 00:04.0 PCI bridge: Advanced Micro Devices [AMD] RS780 PCI to PCI bridge (PCIE port 0) 00:05.0 PCI bridge: Advanced Micro Devices [AMD] RS780 PCI to PCI bridge (PCIE port 1) 00:06.0 PCI bridge: Advanced Micro Devices [AMD]

Hello oslec make error on RHEL 2.6.9 : Warning: could not find versions for .tmp_versions/dahdi.mod Warning: could not find versions for .tmp_versions/xpd_fxo.mod Warning: could not find versions for .tmp_versions/xpd_fxs.mod Warning: could not find versions for .tmp_versions/xpd_pri.mod Warning: could not find versions for .tmp_versions/xpp.mod Warning: could not find versions for

Hi, I need to run ztdummy for Paging, but now that this is all become dahdi I don`t really know where to start. I did build dahdi before building asterisk, but that`s it. I find it hard to find any documentation referring to dadhi instead of zaptel. I have no Digium hardware, but I still need the ztdummy timer (or whatever it`s called now). How do I get myself going? Regards,

We recently updated our Asterisk (1.4.24) box from Zaptel (1.4.12.1) to Dahdi (2.1.0.4). Everything seemed to go smooth with the exception of meetme. Meetme seems to not be able to find a zap channel for conferencing. We use voice introductions in our conference bridge and it seems to break that feature. The error from the console is.... # app_meetme.c:2593 find_conf: No Zap channel available for

CENTOS 5.5 dahdi 1.4.3.0.1 uname -r 2.6.18-194.3.1.el5PAE [root at localhost dahdi-linux-2.3.0.1]# service dahdi start Loading DAHDI hardware modules: FATAL: Module dahdi not found. wct4xxp: FATAL: Module wct4xxp not found. [FAILED] wctc4xxp: FATAL: Module wctc4xxp not found.

Hi all, I was using dahdi 1.6.2.0.9 version for a long time. We decided to upgrade to 1.6.2.22 a few days ago. After that we started to have some problems with dahdi channels. PS:DAHDI Version: 2.6.0 Echo Canceller: HWEC, MG2 We have 2 PRIs between Ericsson pbx and asterisk and a sip trunk for outside calls. At begining everything works fine but in a few hours, calls from asterisk to ericsson

Hello, # rpm -qa | grep kernel kernel-headers-2.6.18-274.18.1.el5 kernel-PAE-2.6.18-128.el5 kernel-devel-2.6.18-274.18.1.el5 kernel-PAE-devel-2.6.18-274.18.1.el5 [root at localhost ~]# uname -i i386 Trying to install dahdi-linux-complete-2.3.0.1+2.3.0 on CentOS but get below error. Can you please assist in this? [root at localhost dahdi-linux-complete-2.3.0.1+2.3.0]# make make -C linux all

After a reboot, I can't reproduce the problem anymore which is quite frustating. 2011/6/14 Tzafrir Cohen <tzafrir.cohen at xorcom.com> > On Tue, Jun 14, 2011 at 03:44:32PM +0200, Olivier wrote: > > Hi, > > > > I'm using a two-years old installation script for the first time on a > > Squeeze (linux 2.6.32) platform. > > For an unknown reason (might

Hi, I'm using a revision 6822-enabled Dahdi-Tools (see https://issues.asterisk.org/view.php?id=13897) with a Junghanns QuadBRI. 1. Do I still need qozap driver ? If positive, how is it recommended to get it ? 2. Which line should be included in /etc/dahdi/modules to have the appropriate driver loaded ? 3. The process I'm planning to use is : A- Hand edit /etc/dadhi/modules,