similar to: asterisk video

hi, hs anyone able to make video to work on asterisk? i tried following this: http://www.voip-info.org/tiki-index.php?page=Asterisk+phone+xten+eyeBeam i can see that eyebeam is trying to broadcast a video but the other eyebeam is not receiving it. i tested the same setup but this time using ser with rtpproxy and eyebeam video works fine. any ideas? where do you think should i start

I am trying to connect two Xten eyeBeam Video Phone No problems in voice connecting. I tryed to modify my sip.conf [general] language=it videosupport=yes ; enable Asterisk video support port = 5060 ; Port to bind to (SIP is 5060) bindaddr = 0.0.0.0 ; Address to bind to (all addresses on machine) disallow=all allow=h263 allow=gsm allow=ulaw allow=alaw ; H.263 is our video codec ;

--- listas iPfone <listas@ipfone.com.br> wrote: > Hi all > > I need to know if the video support for h.263 is > active in version stable > 1.0.7 to use with eyeBeam in asterisk it works for me... [2222] type=friend secret=xxxx auth=md5 callerid="myCallerId" <2222> canreinvite=no host=dynamic disallow=all context=default allow=alaw allow=ulaw allow=speex

I have three video phones here for testing: Extension 6003 is Eyebeam Extension 6004 is a hard phone (model 8770) Extension 6005 is a hard phone (model 8882) Can anybody have a look at my settings and the output I get from all kinds of dialings, please. The sip settings for all phones is (user / password different): [6003] type=friend username=6003 secret=pwd qualify=200 nat=yes host=dynamic

Hello everyone, I have previously asked this question on the asterisk-video list, but I got directed here. I have a setup consisting of asterisknow beta4 (not sure if that is crucial) and a few clients all running X-Lite 3.0 (not eyebeam) on the local network. My computer has a USB-Camera installed, and now I would like to do some video calling with it, at least, so that the other user can

Sorry if you see this message repeated twice. I would like to set up hard phones and softphones with the same extension so that when anybody in the company dials an extension, each user's hardphone and softphone will ring at the same time. I've tried setting this up before, but I noticed that the last sip device to register with the same extension is the only one that rings when the

I am looking for a SIP Soft Video phone, which I can use with Asterisk. If you have one installed (regardless if free or purchased) please tell me which one, the settings in Asterisk and your experience with it. bye Ronald

Hi All, So I've been exploring the use of G.722 encoded wideband audio recently. I have three different SIP devices that allow this: Eyebeam, IP650 and a Siemens S865IP. The Siemens and IP650 seems to work fine together. Calls pass between them in what the Polycom notes as "HD" mode and the audio quality is certainly very good. However, things are not so easy with Eyebeam and the

-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 Hi, I've got Asterisk SVN-trunk-r9059 currently running on Fedora Core 4 w/ 2 eyebeam softphones and 2 Grandstream GXP-2000. At my desk I've got the grandstream and the GXP-2000 I would like to ring both. Using macro-exten-vm and dialparties.agi Macro(exten-vm,200,200-202) the caller is sent to the unavailable voicemail but if I use

I am using eyebeam and I am happy with it. However, it is boring just to talk to my son in the other room. Whenever I try to convince somebody to buy eyebeam, they are scared of the price. Is there a free video soft phone available, that will work with eyebeam / asterisk? bye Ronald Wiplinger

Sorry if this shows twice but it appears my first message was quarantined because of my digital signature. All, I have been tasked with setting up video conferencing utilizing asterisk. One of the requirements is a softset that has video capabilities. Eyebeam looks promising but I was just wondering if anyone out there knows of any freeware with comparable features of Eyebeam that they

I've tried to put a call file to /var/spool/asterisk/outgoing/ to make an outgoing video call, but not succeeded. I could hear the audio, but no video. The asterisk version is 1.4.10, with videosupport=yes The client is eyebeam 1.5.7, with h263 support. Here are some debug messages. It shows the client and asterisk negotiated the video capabilities without problem. However, the 'show

We're using Grandstream GXP-2000 with programmed buttons to the first 5 parking lot extensions. When a call is parked, whichever parking lot extension it's parked on lights up red. We've never used the "announce" part and I'm wondering if there's an option I can't seem to find to disable the announce so the transfer happens faster. Thanks for any help, Ken

Hello list, I'm trying to set up a video call from my Ekiga client to a Grandstream GXV3140 IP-phone. The call succeeds but there is no video. I have in sip.conf : videosupport=yes disallow=all allow=alaw allow=g726 allow=g729 allow=gsm allow=h261 allow=h263 allow=h263p allow=h264 The Grandstream peer has codecs (sip.conf) : gsm;alaw;g729;h261;h263;h263p;h264 The Ekiga peer has codecs

Hi all, I would like to connect in sip mode an Eyebeam client to a messenger via Asterisk. I want to use video. Nat is not an issue as vpn connections will be used. Is this a difficult tasks, can someone give me some pointers to get started... Have a good week-end, Francois Random Thought: --------------- Wanna buy a duck?

Sorry, I don't remember who was asking about this, but it seems that if you record a video message that contains the send video start, it will actually fire up the remote receive window. I.E. Previously I was using the recording section of voicemail to create my video IVR's. This meant that when I arrived at the section to record the message, I had already clicked send video in Xten.

Hi all I was tryed to connect to mysip.ch scs_client by siemens that isn't works well. Does anyones knows to work H/W or S/W applictations in asterisk SIP videosupport? Regards mack_jpn

We've had a regular Park function in the past but recently I found the ParkAndAnnounce() application and I love the idea behind it. Here's a snip from the wiki (http://www.voip-info.org/wiki/index.php?page=Asterisk+cmd+ParkAndAnnounce) so that we're all talking the same language: || ParkAndAnnounce(announce:template|timeout|dial|return_context) || || Park a call into the

This Friday's edition of the weekly VoIP Users Conference call is all about wideband audio (aka HD Voice) and conferencing. The guest for this call is David Frankel, CEO of ZipDX a commercial service that specializes in wideband conferencing. We expect an interesting call touching on many aspects of VoIP going beyond the traditional phone service, conference bridges, technical standards,

Hi, Is it possible to use realtime for Music On Hold? Is it also possible to store the music/audio files on the database, same way a voicemail can be stored on the database? Thank You Regards, Nhadie