similar to: BT - ISDN30 - International Calls not working, everything else is fine :(

I have attached my PRI debug out put when making an international call - hopefully it can shed some light on the situation. I am sorry if this attachment gets to the list twice, I sent one early this morning, but it has yet to appear - i may have sent that one in error. Kind Regards: Gabriel -------------- next part -------------- An HTML attachment was scrubbed... URL:

My international calls are not connecting. [general] pridialplan=dynamic ;prilocaldialplan=unknown internationalprefix=00 nationalprefix=0 localprefix= I have the above in my zapta.conf - yet when I dial an international number, I get a ring, then I get the message "the person you are calling, is currently unavailable" This is an ubuntu machine, with a sangoma card, with

Hello, I'm trying to connect a Digium Wildcard TE110P T1/E1 Card to a 10 channel BT ISDN 30 box, however I'm fairly new to Asterisk and this is the first time I've set-up a telephony interface card can anyone give me some pointers or known working configurations? I'm running Asterisk 1.6 and Dahdi 2.4.1.1. Thanks, Tanuki -------------- next part -------------- An HTML attachment

Thanks to help on this list and Sangoma's support we have incoming and outgoing calls passing through asterisk. However both incoming and outgoing calls are greeted by silence. I've noted our existing config below with our test extensions.conf. Help much appreciated Rory Zaptel ----------------------------------------------------------------------- loadzone=uk defaultzone=uk #Sangoma

If anyone can help me with this I'll be soooo grateful :) We have a isdn30 line, with a DDI range. We also have 2 business units that have separate 0870 numbers that are mapped onto 2 DDI numbers. I would like to be able to present these 0870 numbers from the business units so that the correct number is displayed on a callerid, or when 1471 is dialled. BT claim that I can only have a

Hi list! What exactly is the meaning / function of the pridialplan & prilocaldialplan? I've been trying to find out what the different possibilities for these settings are but couldn't find a clear answer. The possible parameters I could find are are : local,unknown,dynamic,national,international and maybe there are more? Thanks!

I have a couple of numbers that are diverted to a number that is conected to an isdn30 card, running asterisk 1.4. eg. 123456 => 22334455 654321 => 22334455 What I would like to know is the number of the orginal number dialled (123456 or 654321). I thought that RDNIS was the answer, but it is always coming up blank. When I did a debug on the pri span, I saw the following message

hi, i'm having problems getting asterisk spliced between an E1 PRI (german Telco Arcor) and an Ericsson Business Phone 250 digital PBX. The Asterisk Server has a TE405P with it's port 1 connected to the E1 PRI provided by our telecommunications provider Arcor and port 2 connected to the E1 PRI of our Ericsson BP250. the setup before: Arcor TelCo PRI(E1)

hi. could somebody explain how exactly the following parameters in zapata.conf work: pridialplan prilocaldialplan internationalprefix nationalprefix localprefix privateprefix unknownprefix the wiki & comments doesn't quite explain them. and phone companies are absolutely no help. i've setup systems in the US & China with trial & error until it works. now i'm setting up a

For outgoing calls made on our PRI circuit we are setting the Caller ID using the format Exten => _9XXXXXXX,1,SetCallerID(1601XXXXXXX) The monitor shows that the CallerID is being set to the specified number, but yet when the call is received on the user end the ID is always the base number of our DID. For example we have 8600-8650 as DID's but the callerid is always 8600 regardless of

so here it is, the problem that's been nagging me for the past 2 days: connected a box to my telco's NTBA <-> zap/asterisk. which works: box:/etc/asterisk# cat /proc/zaptel/1 Span 1: ZTHFC1 "HFC-S PCI A ISDN card 0 [TE] layer 1 ACTIVATED (F7)" HDB3/CCS 1 ZTHFC1/0/1 Clear (In use) 2 ZTHFC1/0/2 Clear (In use) 3 ZTHFC1/0/3 HDLCFCS (In

I have a problem that is probably so "doh" I will be embarrassed. However, I have spent all evening on this with no success: I have the following setup (asterisk cvshead as of today) 10 Channel EuroISDN<=>Asterisk<=>Meridian What I can do: Call from outside into the asterisk, dial an extension, and pass through to the meridian. WooHoo. What I can't do: Call from

On how to even search for this "feature" as I have no idea on what it can be. I've got a meridian linked to * (by EuroISDN) which is linked to a ISDN30. I can make calls from the meridian, and receive calls into the meridian. Great stuff. However, if someone dials an invalid number, then instead of hearing a "three tone", the line just drops and goes dead. The console

Hi, Are there any hardware for ISDN30 ? if yes any problem with this ? is i out-of-box like ISDN2 but with 30 linies ? Do I need more than the cable from my teleprowider and a PCI-card ? /HHA _________________________________________________________________ Find high-speed ‘net deals — comparison-shop your local providers here. https://broadband.msn.com

anybody recommend a supplier in the UK for a pri/isdn30 line (other than BT) thanx very much __________________________________________________ Do You Yahoo!? Tired of spam? Yahoo! Mail has the best spam protection around http://mail.yahoo.com

>> So it sounds like it should "just work". I'll let you know in a few >> weeks time :) > TDM400P to E1/T1 card faxing fails by design. The lack of > synchronisation between cards means it can *never* work with any > reliability. The hardware will not permit it. >> >> (And I know I've asked this before, but any recommendations for a >>

Quoth Jon Morgan <jon.morgan at motors.co.uk> > >We have a 2 port Digium TE220P card, one span is configured to connect to our ISDN30 provider (British Telecom), the other span connects to our internal PBX. Here's the zaptel.conf snip: > >span=1,1,0,ccs,hdb3,crc4 >bchan=1-15 >dchan=16 >bchan=17-31 > >span=2,0,0,ccs,hdb3,crc4 >bchan=32-46 >dchan=47

I'm just curious to know if anyone is using a usb 2.0 / ISDN30 (specifically EuroISDN) device. We are looking to purchase another pci card, but was wondering if anyone has any horror / success stories to share regarding a usb device. TIA Julian

I just managed to put in a TE410 card in an Asterisk box to work with OnRamp 20(E1 downunder). I am able to dial in but was not able to dial out. Can anyone offer me some advice please? In my extensions.conf, I just put in: [default] ... exten => 0,1,Dial(Zap/g1) and I get this on the console when I dialled 0. -- Executing [0 at default:1] Dial("SIP/5166-b76004f8",

Hi all i have just set up a asterisk in china, using DE410P and one E1 line and get a phone number like: +86 020 87654321 from my sp when somebody dial +86 020 87654321 , the asterisk will get the call in number by ${EXTEN} variable, but it can only get 87654321, no area code . when someone dial +86 020 87654321xxxx , xxxx means 4 digits, the phone can call in, and the