similar to: OT - Is sourceforge OpenH323 active ?

Hi Mark Funny you should ask this question, I just spent yesterday integrating building asterisk with h323 support to connect to a Cisco call agent.....I cant say if it will work for you but it compiles and loads nicely ! I will be testing this evening.... # cd /root # wget http://www.voxgratia.org/releases/pwlib-Pandora_release-src-tar.gz # wget

August 5th, 2005: Craig Southeren announced today that OPAL (http://www.voxgratia.org) now provides support for the IAX2 protocol(Written by Derek Smithies and released under the MPL). This support allows you to use chan_woomera (http://www.pbxfreeware.org) driver developed by Anthony Minessale II to interconnect your asterisk systems and use the IAX2, SIP, and H.323 protocols. I would

I'm trying to compile channels/h323 and chan_h323 from CVS-STABLE, on Fedora Core 3. Firstly, despite the warnings in h323/README, I decided to try using the distro-specific versions of openh323 and pwlib. Of course, the Makefiles in channels and channels/h323 assume that openh323 and pwlib have been specially compiled in $HOME, so I modified the Makefiles to look for headers and libraries in

Hello everyone, I'm currently developing an adaptive videoconferencing application based on Ekiga which uses TFRC as a congestion control mechanism to adapt the video encoding rate according to the quality of the network experienced. My goal was to use the open-source Theora codec for video transmission. Unfortunately, it seemed that Theora 1.0 did not properly implement any correct CBR mode.

Hi Paul, Maybe you can give some help here: I'm trying to compile and build the debian source file of asterisk_1.8.5.0.orig.tar.gz and asterisk_1.8.5.0-1digium1~natty.debian.tar.gz. Howerver every time I'm trying to compile it, using ./configure of dpkg-buildpackage -rfakeroot -us -uc I get errors like this: checking for mandatory modules: CAP GSM OPENH323 IMAP_TK PWLIB... fail

Hello! I've got a question regarding the Q.931 Setup-field Calling Party Number. It contains five things: Type of number, Number Plan, Presentation and Screening indicators and the actual number. Our provider uses some of those to decide if the numer should be presented or not to the outside world. I've done a crude hack in our GnuGK to always change those so that our numbers are

---------- Forwarded message ---------- Date: Wed, 11 Jun 2003 01:10:16 +0200 (CEST) From: Siggi Langauf <langausd@fachschaft.informatik.uni-stuttgart.de> To: asterisk-users@lists.digium.com Subject: Re: [Asterisk-Users] chan_h323 + openh323 CVS = no go? On Tue, 10 Jun 2003, Jeremy McNamara wrote: > If you would have followed the build instructions laid out by the Open > H.323 folks

hi, I'm currently trying to use Speex with Asterisk from my OpenH.323 client. It seems to mismatch the codecs, below is my log from Asterisk. My Openh323 client crashes in responding to a Speex request for bits per frame. I'm guessing it either isn't running the codec correctly or doesn't support the same subset of speex codecs as openh323. (I'm using speex-1.0.1 with

Hi, i'm searching and trying, but can't get it working. I'm trying to send calls from Cisco Callmanager to Asterisk with oh323 channel driver. Therefor the asterisk is defined as a H323 Gateway in the Cisco Callmanager. The Call comes from CCM to Asterisk and it works but i didn't get the called number. This is needed because i want to make Voicemailboxes. If i connect via

Date: Fri, 10 Sep 2004 16:37:33 +0300 > From: Michael Manousos <manousos@inaccessnetworks.com> > Subject: Re: [Asterisk-Users] Problems with 0penh323 Channel Driver > To: Asterisk Users Mailing List - Non-Commercial Discussion > <asterisk-users@lists.digium.com> > Message-ID: <4141AE1D.3020403@inaccessnetworks.com> > Content-Type: text/plain; charset=us-ascii;

HI, I have the latest RC2 of Asterisk on a RH 9 non-modified-load box. I have an Avaya IP phone that uses h323, so I am trying to compile h323 into Asterisk. Now, I downloaded pwlib and openh323 tar files and I have compiled this according to the instructions: pwlib: ./configure make opt openh323: ./configure make opt cd asterisk/channels/h323 make cd asterisk make clean make install I am

www.sans.org has two vulnerabilities in OpenH323, one as 'high', one as 'other'. Jason Sjobeck ICQ 5579183

ver 1.17.2 [root@71 openh323_v1_17_2]# make opt /usr/src/openh323_v1_17_2/openh323u.mak:192: usr/src/pwlib_v1_9_1/make/ptlib.mak: No such file or directory make: *** No rule to make target `usr/src/pwlib_v1_9_1/make/ptlib.mak'. Stop. [root@71 openh323_v1_17_2]# thx in advance _________________________________________________________________ Express yourself instantly with MSN Messenger!

Hi. I've found a large bug in Speex Codec implementation in Openh323 code. I've signalled this bug in the Openh323 site, in the section "Report bugs". THE BUG NUMBER IS 143! Everybody can verify that the report is arrived monday 7 July!!!!! But no one has analyze this bug....!!!! So the result is: Openh323 implements Speex Codec that runs with wrong bit rates and that

Banging my head against a brick wall trying to get a working H.323 implementation for CVS-HEAD. (The ONLY H.323 I have had working is OH323 v0.6.5 with CVS-STABLE - see my other post regarding compile problems on OH323 for HEAD) So, I thought, lets try this wonderful chan_woomera (dubbed "H.323 for Asterisk that works!"). I get exactly the same kind of problem as I have previously had

Hi what version of openh323 and pwlib are suggested for asterisk 1.4.21.1.? Thanks to all -- /*************/ nik600 https://sourceforge.net/projects/ccmanager https://sourceforge.net/projects/reportmaker https://sourceforge.net/projects/nikstresser

openh323 speexcodec.cxx has: BOOL SpeexCodec::EncodeFrame(BYTE * buffer, unsigned & length) { // convert PCM to float float floatData[SAMPLES_PER_FRAME]; PINDEX i; for (i = 0; i < SAMPLES_PER_FRAME; i++) floatData[i] = sampleBuffer[i]; // encode PCM data in sampleBuffer to buffer speex_bits_reset(bits); speex_encode(coder_state, floatData, bits);

On 05-06-13 00:27, Erik de Castro Lopo wrote: > Martijn van Beurden wrote: >> Considering flac.sourceforge.net, is this ever going to be updated? In >> case it should be redirected, I checked on my own sourceforge project >> webpage, adding the following two lines to .htaccess should redirect >> traffic to any resource on flac.sourceforge.net to xiph.org/flac >>

Thanks Vamsi I have not been able to locate pwlib - 1.6.6 or openh323 1_13_5. I found the latest versions through sourceforge and I found some older versions on another site, but not these versions. This has been quite frustrating. Anyway, I think by using the asterisk-oh323 branch under channels in the asterisk source tree I will have more luck. At present it seems to compile successfully, but

Hi there I have Asterisk running beautifully on our test server. Over the past few days I have been tearing my hair out trying to compile various versions of asterisk-oh323 on various versions of pwlib and openh323. pwlib is now up to 1.8.3 and openh323 is now 1.15.2 stable. asterisk-oh323 is currently 0.7.1 I have tried these three with many errors. I have tried 0.7.1 with pwlib 1.5.2 and