similar to: help with dahdi

I''ve been trying to install a 2.6.37-12 kernel from kernel-ppa on one of my Ubuntu machines without success. It keeps giving errors like this: [ 9.115544] ata9: exception Emask 0x0 SAct 0xf SErr 0x0 action 0x10 frozen [ 9.115550] ata9.00: failed command: READ FPDMA QUEUED [ 9.115556] ata9.00: cmd 60/04:00: d4:82:85/00:00:1f:00:00/40 tag 0 ncq 2048 in [ 9.115557]

I am trying to get esata working. my lspci is below. When I plug in the disk an turn it on - dmesg reports nothing. Is it supposed to report anything like a usb disk does? Is there a module to load? My motherboard is GA-MA78GM-US2H. Jerry --------- 00:00.0 Host bridge: Advanced Micro Devices [AMD] RS780 Host Bridge 00:01.0 PCI bridge: Advanced Micro Devices [AMD] RS780 PCI to PCI bridge

hi all, I am trying to get lm_sensors to work. did the yum install lm_sensors service lm_sensors start sensor -s and it says no sensors found. did lsmod | grep it87 and it87 57061 0 hwmon_vid 35905 1 it87 hwmon 36553 1 it87 i2c_isa 39105 1 it87 i2c_core 56129 5 it87,i2c_isa,i2c_dev,i2c_ec,i2c_piix4 Seems like

Hello, I have experienced a dom0 crash where the system became unreachable via the network and the console was unresponsive. I would appreciate help interpretting the logs and any configuration change suggestions. It is a stock Debian Lenny dom0 running xen 3.2.1 with kernel 2.6.26-2-xen-amd64 and an AMD Athlon IIx4 with 4 GB of RAM. It is running 4 VMs. One VM has two PCI NICs being

https://bugs.freedesktop.org/show_bug.cgi?id=41585 Summary: X freeze and PGRAPH errors in dmesg Product: xorg Version: unspecified Platform: x86-64 (AMD64) OS/Version: Linux (All) Status: NEW Severity: major Priority: medium Component: Driver/nouveau AssignedTo: nouveau at lists.freedesktop.org

Hello, Like many trying and posting here, I''m new to VGA passthrough. Computer was bought, checking compatibility from http://wiki.xen.org/wiki/VTd_HowTo The hardware is mostly not exactly on the list, but mainly new versions of the same series (I think). IOMMU "seems" to be working (not 100% sure what to check). I used debian/wheezy kernel and xen, dom0 and HVM domu.

Hi, All the reviews for the AMD 890fx chipset reported that it supports IOMMU v1.2. But I cannot find any mention of that on AMD site. Does 890fx support IOMMU? Do 890fx motherboards with IOMMU exist? Does Xen support 890fx? Regards, Leonardo _______________________________________________ Xen-devel mailing list Xen-devel@lists.xensource.com http://lists.xensource.com/xen-devel

Hello, I'm looking for help figuring out why I am having problems with shutting down a machine. I have tested the machine using Fedora 19 and Ubuntu 12 Live CD's and both power down without issues. I added acpi.debug_level=1 to the grub boot as it was suggested to see more info about ACPI in the logs I found the following ACPI Errors in the /var/log/messages Oct 11

Hi, I need to run ztdummy for Paging, but now that this is all become dahdi I don`t really know where to start. I did build dahdi before building asterisk, but that`s it. I find it hard to find any documentation referring to dadhi instead of zaptel. I have no Digium hardware, but I still need the ztdummy timer (or whatever it`s called now). How do I get myself going? Regards,

Greetings! I''ve got a FreeBSD-based (FreeNAS) appliance running as an HVM DomU. Dom0 is Debian Squeeze on an AMD990 chipset system with IOMMU enabled. The DomU sees six physical drives: one of them is a USB stick that I''ve passed through in its entirety as a block device. The other five are SATA drives attached to a controller that I''ve handed to the DomU with PCI

On Sun, Nov 24, 2019 at 12:00 AM Phil Perry <pperry at elrepo.org> wrote: > This list does not accept attachments. Please just post the relevant > line for your ethernet device. or if you're not sure, paste the whole output inline in your message.... something like.... # lspci 00:00.0 Host bridge: Advanced Micro Devices, Inc. [AMD] RS880 Host Bridge 00:01.0 PCI bridge:

Hi all, I have installed a centos 6.2 x86_64 box to use as a multimedia center. All works ok, except sound over hdmi using nvidia graphics card. My lspci output: 00:00.0 Host bridge: Advanced Micro Devices [AMD] RS880 Host Bridge 00:02.0 PCI bridge: Advanced Micro Devices [AMD] RS780 PCI to PCI bridge (ext gfx port 0) 00:06.0 PCI bridge: Advanced Micro Devices [AMD] RS780 PCI to PCI bridge

Hi, Sorry i left the file behind. Here's the file. Best regards. On Sat, Nov 23, 2019, 16:50 Phil Perry <pperry at elrepo.org> wrote: > On 23/11/2019 06:48, Ebed wrote: > > Hi, > > > > Yesterday i tried to install centOS 8 on my little router and server, but > > there's no ethernet listed there. I'm using Compaq pressario V3737TU > which >

Hi, Here it is... 00:00.0 Host bridge [0600]: Intel Corporation Mobile PM965/GM965/GL960 Memory Controller Hub [8086:2a00] (rev 0c) 00:02.0 VGA compatible controller [0300]: Intel Corporation Mobile GM965/GL960 Integrated Graphics Controller (primary) [8086:2a02] (rev 0c) 00:02.1 Display controller [0380]: Intel Corporation Mobile GM965/GL960 Integrated Graphics Controller (secondary)

I updated Asterisk to 1.6.2.7 and now the user introduction in the meetme application is no longer working: [May 27 09:26:51] WARNING[2407]: channel.c:4034 ast_request: No channel type registered for 'DAHDI' -- Created MeetMe conference 1023 for conference '800' [May 27 09:26:51] WARNING[2407]: app_meetme.c:3640 find_conf: No DAHDI channel available for conference, user

Hello there: I think I have a silly kernel configuration problem. I'm running: * vanilla 2.6.27.10 kernel built from source * dahdi-2.1.0.4 built from source So far so good, dahdi module loads just fine: dahdi: Telephony Interface Registered on major 196 dahdi: Version: 2.1.0.4 when I try to: hal04 dahdi # modprobe dahdi_dummy FATAL: Error inserting dahdi_dummy

I'm playing around with an ALIX 2D2 board (http://www.pcengines.ch/alix2d2.htm). It's a fanless, x86 system using an AMD Geode processor with 256MB of RAM. Also available are two network interfaces, two USB ports and one serial port (no keyboard or VGA). I'm using the Voyage Linux distro, which basically is Debian Lenny optimized for this board. Asterisk 1.6.1.12 runs fine on the

Howdy, I am playing around with asterisk within an LXC container on Ubuntu 11.04. I have asterisk (1.4.42) running fine, but want access to dahdi_dummy for timing (meetme). I have dahdi installed on the "host", and dahdi_dummy is loaded: root at astnorth:/# ls -ltr /dev/dahdi total 0 crw-rw---- 1 root root 196, 250 2011-06-08 13:59 transcode crw-rw---- 1 root root 196, 253

Hi to all. I'm trying to use meetme on asterisk 1.4.22.1. On a debian i've compiled (as i need h323 support) openh323_v1_18_0 pwlib_v1_10_0 dahdi-linux-2.1.0.3 dahdi-tools-2.1.0.2 asterisk-1.4.22.1 All works fine, dahdi status is: asterik:/data/programmi# /etc/init.d/dahdi status ### Span 1: DAHDI_DUMMY/1 "DAHDI_DUMMY/1 (source: RTC) 1" (MASTER) asterik:/data/programmi#